Used Sidel Pet for sale (28)

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel Itsdpfx Aswcggvoddob • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Itjdpfx Aeutni Rjddeb Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: new, Parts for the SIDEL blow molding machine bearings Itjdpfxsiqum Ie Addeb O ring nozzle strap sealing axis

Condition: used, Year of construction: 2000, COMPLETE BOTTLING LINE PET 18,500 BPH Product: PET Bottles Speed: 18,500 BPH (2 L bottles) PET Preform Tipper VE.CO. – Year 1997 Model: 30L917 PET Preform Orientator Sidel – Year 1999 Model: XMMC94 PET Blower Sidel – Year 1999 Model: SBO14 Number of molds: 14 Air recovery system Air Conveyors Lanfranchi – Year 2007 Monoblock Sidel-Simonazzi and Capper Arol Model: EUROSTAR RAA282 – Year 1985 Direction: Clockwise Rinser 50 grippers Manual carousel height adjustment Fixed nozzle 1 treatment with water Fillers 80 valves Filling type: Isobaric Valve type: Mechanical Valve functions: Degassing and sanitization Electric tank height adjustment Capper Arol 10T – Year 1998 Model: TS EURO/K10T.350O Manual head height adjustment Cap type handled: 3-START HEXALITE Cap dimensions: Ø 28.6 mm h: 10.5 mm Cap feeding system: Pick & Place Nitrogen Doser Terboven – Year 2008 Model: ISTE-CON 5 Cap Elevator P.Q.L. Mechanics – Year 2011 Model: 09B3 Type: Pneumatic Level and Cap Inspector Heuft (Spectrum) – Year 2013 Model: HBBVXTXXX Inspection type: Cameras Checks the fill level; cap presence; incorrectly screwed caps Complete with ejector Labeller Krones – Year 1998 Model: CONTIROLL Direction: Clockwise Electric head height adjustment 15 plates with mechanical cam Number of stations: 1 Labeling type: Roll-fed Label types: WRAP-AROUND Label Presence Inspector Heuft (Reflexx) – Year 2023 Model: ONE Inspection type: Cameras Lumonics Laser Marker – Year 2009 Model: SL301 Bottle Conveyor Belts Procomac – Year 2000 Model: P 3233/1A Divider Procomac – Year 2000 Model: P3227 Shrink Wrapper Zambelli – Year 1999 Model: LFT3657 Version: Film launch Type: Film only Shrink Pack Conveyors Procomac – Year 2000 Model: P 3233/1A Batch Coder Markem – Year 2010 Model: 9040 Type: Inkjet Handle Applicator Comag – Year 1999 Model: H65/1 Bundle Divider L.M. – Year 2000 Model: 28809 Palletizer ACMI – Year 1999 Model: RASAR C/1350 Type: Pusher Double infeed Pallet magazine Interlayer System Iedswditnspfx Addjtb Pallet Wrapper Tosa-Acmi – Year 2012 Model: 120+475 Wrapping type: Rotating arm Top sheet dispenser Pre-stretch Pallet Printer Eidos – Year 2009 Model: 7P6NRSA General Information: Supported bottle dimensions: Ø min: 89 mm; Max Ø: 95 mm Height min: 145.90 mm; Max height: 344 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Sidel Combi PET Bottled Water Filling Line – 18,400 BPH Manufacturer: SIDEL Year: 2018 Capacity: 18,400 bottles/hour (0.5L) / 16,400 bottles/hour (1.0L) / 14,400 bottles/hour (1.5L) Line configuration: - Blow Molder: SIDEL MATRIX SBO 08 MM 8/8 (2018), includes Box Tipper, Lifting & Tipping Unit - Automatic Preform Feeding: SAMETO EBHS 2050 (2018) - Compressor: SIAD VITO 1920 (2017) - Tribloc Rinser-Filler-Capper: SIDEL SF 100 FM (2018): 100 rinsing stations, 32 filling valves, 8-head screw capper (29/25), 141 mm pitch - Cap Feeder: Krones Gebo Cermex (2018) - Fill Level/Cap Inspection: QUBBER (2018) - Container/Label Inspection: QUBBER (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Labeller: SIDEL ROLLQUATTRO F15EVO 18T/R HH3 S1/E1 (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Shrink Wrapper: SIDEL VERSA FILM ACCESS (2018) - Pack Conveyor: Tetra Pak / Gebo Cermex (2018) - Carry Handle Applicator: KARTVILLE H 120 ND (2018) - Palletizer: SIDEL KOMBI 1P 1I IN LINE (2018) - Pallet Conveyor: Tetra Pak / Gebo Cermex (2018) - Pallet Inspection: Tetra Pak / Gebo Cermex (2018) - Layer Pad Inserter: Tetra Pak / Gebo Cermex (2018) - Pallet Stretch Wrapper: Robopac HELIX 3 E (2018) Itsdpfsx Nahyex Addob All equipment is in excellent condition and suitable for high-capacity still water bottling in PET packaging.

Condition: used, functionality: fully functional, Product: Still Water Speed: 18,000 l/h (2 L bottles, Ø 92) Formats: 0.5 L and 2 L Preform Tipper Manufacturer: VE.CO. Model: R 13/2 Year: 2002 Blow molding, filling, and capping monoblock comprising: - SIDEL SBO 16 Series 2 Stretch Blow Molder • Year: 2002 • Type: Rotary • Number of molds: 16 (molds not included) • Complete set for Alaska neck processing included • Air recovery system • NO CHILLER - SIDEL ALSIM Filler • Year: 2002 • Rotation direction: Counterclockwise • Number of filling valves: 63 • Filling method: Gravity • Valve type: Mechanical • Pressurized cabin with filters - AROL Capper • Number of heads: 12 • For pre-threaded plastic caps: GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g (technical drawing available) • Cap distribution system: Pick & Place MONOBLOCK FULLY OVERHAULED IN LATE 2024 Cap Elevator: - Manufacturer: AROL - Year: 2002 - Type: Mechanical Labeller: - Manufacturer: KRONES - Model: CONTIROLL Iodpjwzbppsfx Addstb - Year: 2012 - Type: Rotary labeller - Rotation direction: Counterclockwise (parallel infeed and outfeed) - Electric head adjustment - Number of plates: 16 - Mechanical plate movement via belt - Number of stations: 1 - Label application type: Roll-fed - Number of labels applied: 1 - Applicable label types: Wrap-around plastic from reel - Label presence inspection Laser Coder: - Manufacturer: Videojet - Model: 3210 - Year: 2024 - NO FUME EXTRACTION SYSTEM Shrink Wrapper: - Manufacturer: SMI - Model: SK452 F - Year: 2005 - Version: Film launch - Type: Film only - Double lane - Current formats: • 2 L: 3x2 double lane • 0.5 L: 4x3 double lane • 0.5 L: 6x4 single lane Handle Applicator: - Manufacturer: TWINPACK - Model: MHTE - Year: 2000 - Double lane Palletizer: - Manufacturer: ACMI - Model: PASAR P130 2L - Year: 2000 - Type: Layer palletizer - Pallet magazine - Slip sheet insertion unit - Dual infeed Pallet Wrapper: - Manufacturer: TOSA - Model: 125 + 475 - Year: 2002 - Wrapping type: Rotating ring - Equipped with top sheet dispenser - Pre-stretch capability

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler - Number of stations: 15 - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Itodpfx Adexz Aytedeb Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard - Year: 2009

Condition: used, Year of construction: 2013, Overview  This complete filling line consists of the machines below. It was stopped in 2024 and is immediately available. Due to regular maintenance and several upgrades even the older machines of this line are in good technical condition and the supply of spare parts is secured.  Details  PET line up to 30,000 bph in 1.5 L. Neck 29/25 Line consisting of: Preform rinser Krones, 2016 Blower Sidel, 2002 Gangloff Scoma filling machine, 2013 Capper, 2013 Caps Sidel, 2013 Commissioner Heuft, 2001 CIP Sovotec, 2011 Pallet conveyor, 2013 Inspector Krones, 2013 Labeling machine Krones, 2006 Domino bottle coder, 2014 Shrink-wrapping machine Ocme, 2013 Twinpack handle applicator, 2012 Conveyors NTS, 1997/ overhauled 2012 Gebo bottle conveyor, 1997/ completely overhauled 2012 Accumulation table, 2013 Palletizer Ocme, 2014 Labeling machine for packs, 2011 Labeling machine for packs 2, 2011 Conveyor packages and divider SES, 2003 film Aetna, 2014 film Aetna, 2014 Packlift Ambaflex, 2013 Isdpfevuqtljx Addstb

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Iodpfxetr R Tke Addjtb

Condition: used, Year of construction: 2007, This is a Sidel SBO 4 blow moulder, it’s designed to receive preforms of 38 mm neck size caps and blow mould the bottles . The speed of the machine is at 6,000 bottles per hour on 2 litre round bottles . The year of manufacture is 2007 and the condition is very good. The is delivered with the pre forms hopper and elevator. Capacity: 6000 b/h Volumes: 250-500-1000-2000 ml Neck Size of preforms: 38 mm Format: Round bottles Itsdpex Tdahofx Addsb Air consumption: 11 bar Controls: SIEMENS SIMATIC MULTI TOUCH PANNEL Available: Immediately

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h Itjdpfxjx A Uu Ej Addsb EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) Iodpfxjg Ailco Addotb COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2012, Overview  This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data  Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected Scope of Delivery  Depalletizer | Kettner | 60 pallets/hour | 1992 | Automatic, glass bottles Decrater | Kettner | 2,500 crates/hour | 1992 | For returnable crates Crate washer | Seroba | 2,500 crates/hour | 1992 | Stainless steel, single bath Bottle washer | Krones | 47,200 bottles/h | 2010 | Multi-zone cleaning Empty bottle inspection | Heuft | 46,000 bottles/h | 2012 | Camera system Filler | Krones | 42,300 bottles/h | 2012 | Glass bottles, return operation Labeller | Krones | Topmatic | 2012 | 2 stations (body & back), pitch 125mm + Checkmat Fill level & closure inspection | Heuft | 43,000 bottles/hour | 2012 | Sensor & camera system CIP & mixer station | KHS | 16,500 liters/hour | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bottles/hour | 2012 | Inkjet printer Packing machine (Crater) | Kettner | 2,200 crates/hour | 1992 | Automatic Palletizer | Kettner | 50 pallets/hour | 1992 | Automatic Pallet wrapper | Robopac | 50 pallets/hour | 1992 | With stretch film Pallet labeler | Logopak | 60 pallets/hour | 2014 | Labeling of pallets Bottle conveyor belts | Sidel Gebo | – | 2012 | Stainless steel conveyor technology Itsdpfx Ajxrcv Neddob

Condition: used, Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Itodpfx Ajxytvisddsb Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included

Condition: used, 1,40 x 4,50 Höhe 1.10 Itjdpexytqmofx Addob

Condition: used, functionality: fully functional, This line consists of: - Filler - Capping machine and cap feeder Itedpfxsx S Eu Dj Addob Production capacity will depend on the packaging format and the product to be filled. ZALKIN CAPPER specifications: * Model: T6069 * Number of heads: 20 * Output: 25,000 bottles/hour Zalkin capping machines are designed for crimping aluminum screw caps (for carbonated and non-carbonated beverages). They can also be configured for the application of various types of aluminum or plastic closures (pre-sealed aluminum or plastic caps, screw-on or tamper-evident caps). The SIDEL cap elevator/orientator combines three functions in one: lifting, orientation, and feeding. The system efficiently orients caps while optimizing footprint. The design allows orientation of caps from 20 mm to 120 mm in diameter, in plastic or metal, based on geometric shape. Throughput reaches up to 2,000 caps/minute for standard formats and 1,000 caps/minute for sports-type caps. The cap feeder easily interfaces with the SIDEL cap air conveyor, eliminating the need for precise positioning of the unit.

Condition: used, Year of construction: 2001, Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270 Ijdsl Hx Ecepfx Addstb

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Isdorqar Sopfx Addotb

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Itedpforkgy Ujx Addob

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Itsdpfx Adjnpbhvodjb

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Ijdpfsrazwrsx Addetb

Condition: used, Year of construction: 1992, Used Blow Molding Machine Sidel 1992 Manufacturer: SIDEL Model: SBO2 Year: 1992 Speed (b / h): 3000 Processed formats: 0.25ml – 2 liter Accident prevention protections: Yes Manuals available: Yes Revisions available: Yes Operating status: In production Number of cavities: 2 Preform neck type: Preform 1881 weight: 9000kg Quick format change: Yes Preform loader: Yes Preform orientator: Yes Compressor: No Chiller: No Air recovery system: No PLC type: Mitsubishi Spare parts available: Yes Hours worked: 2000 Consumption: Volt:360 Kw:40 Hz:100 Itsdpovgunwjfx Addjb Notes: Machine working stabile suitable to be connect with filler machine. The machine has been completely updated, hmi electronics and new plc.

Condition: used, Year of construction: 2003, operating hours: 19,500 h, Used Blow Molding Machine Sidel SBO 2003 We have a Used Blow Molding Machine available for purchase, the Sidel SBO 2003, with the reference. The machine was manufactured by Sidel in 2003 and has a model of SBO 12. It has a speed of 17000 BPH and is suitable for creating PET containers. This particular machine has 12 cavities and comes equipped with a preform loader, preform tipper, and preform unscrambler. It also has an air recovery system and is a rotary type. The preform neck types it supports are 1881 and 2925 neck. The machine is currently in a ready state for operation and has safety features installed. It also comes with manuals and has been in operation for 19500 machine hours. Ijdpfxsvr S Tns Addjtb If you’re interested in purchasing this machine, please let us know.

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. Itedpfxjvgu D Se Addjb The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2005, Used Blow Moulding Machine Sidel SBO6 2 Year 2005 – 9000 bph Itjdpfx Adovguxvjdsb The machinery has been disconnected from the functioning production. The PLC is present, and its functionality is ensured. The machinery as a whole is in a good state of maintenance, pre-production maintenance is still recommended because the blow molding machine has been in storage for about 12 months. Transport is a large load, therefore outside the normal gauge. We can supply all necessary spare parts for this blow molding machine.