Used Six Spindle Automatic Lathe for sale (34,996)

Condition: new, Year of construction: 2024, Special offer: €42,000 (instead of €49,900), excluding VAT. Immediately available / Made in Italy Included premium features: - Heidenhain ND5023 3-axis position display - 5-position length stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air supply on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free movement of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, rear guard covering the entire machine length, guard for leadscrew and feed rods, emergency stop button - Chip tray on wheels - Cooling system with electric pump - Central lubrication of the guides with automatic pump - Traveling and steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Ljdjpq R Rdjpfx Aazshl Optional features: - 3- / 4-jaw chuck Technical data: - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Compound slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: used, Year of construction: 2014, functionality: fully functional, CNC: FANUC Series 31i – MODEL B Max. workable bar diameter: 51 mm Max. workable length: 230 mm MAIN SPINDLE Max. rotational speed: 5000 rpm Spindle nose: ASA 5" Spindle bore: 59.5 mm Inner bearing diameter: 90 mm Motor power: 15 kW TAILSTOCK Max. rotational speed: 5000 rpm Spindle nose: ASA 5" Spindle bore: 55 mm Useful through-hole: 45 mm Inner bearing diameter: 90 mm Motor power: 11 kW TOP TURRET: LEFT 1 TOP TURRET: RIGHT 2 BOTTOM TURRET: 3 Number of positions: 12 Rotational speed: 4,000 rpm Motor power: 3.7 kW Rotation time (1 position): 0.15 sec Max. travel on Y-axis: 90 mm (-40/+50) COOLANT Tank capacity: 450 l Total power of electric pumps: 4.8 kW DIMENSIONS - WEIGHT Overall dimensions with chip conveyor: 5033 x 2100 x 2458 mm (h) Weight with conveyor: 8200 kg THE MACHINE HAS UNDERGONE THE FOLLOWING MAINTENANCE: Main spindle belt replacement Tailstock spindle belt replacement Bearing and gear replacement for motorization Tailstock brake replacement X1 axis screw replacement Z2 axis screw replacement Motorized gear box replacement Motorized fan replacement Relay replacement Hydraulic oil filter replacement Hydraulic filter replacement Traffic light replacement Ceramic seal replacement Fanuc drive overhaul Betatron drive overhaul Battery replacement Air hose replacement Control panel replacement Ignition switch replacement Chip conveyor belt replacement Ledpfxowari Rj Aazehl Part conveyor belt replacement

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Parts shown by hand not come. Lodpfoz Egxfjx Aazehl

Condition: used, Year of construction: 2007, machine/vehicle number: 511966, Turning length: approx. 400 mm, bar passage: 60 mm, counter spindle, 2 x 14-position tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar feeder MBL 65/3700, the machine requires repair; repair costs according to the cost estimate: approx. €1,880.00 net; drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Ljdpozqy U Hefx Aazjhl

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Lodstqfq Uopfx Aazehl

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: R14507, Year 2008 with Fanuc 18i-TB With LNS Tryton 107 Country of origin: JP Voltage: 200V 3ph 50/60Hz Dimensions: 141x56x140 cm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS (Standard) Number of axes: 6 Number of spindles: 2 Main spindle Max bar diameter: Ø 7 mm Max machining length: 40 mm Stroke: 40 mm Spindle speed: 16,000 rpm Spindle power: 1.1 kW C axis indexing accuracy: 0.0001° Sub-spindle Max bar diameter: 7 mm Spindle speed: 10,000 rpm Power: 0.5 kW C axis indexing accuracy: 1° Tool post 1 Number of positions: 5 Lodpfx Aoya Aq Rjazjhl Driven positions: 2 Rotating tool speed: 8,000 rpm Tool post 2 Number of positions: 3 End-working attachment Number of positions: 3 Sub-operation Number of positions: 3 All technical details are provided without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 in very good condition. Lhodpfx Aezpyq Ejazol

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Lhedpfxezacwde Aazel Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: good (used), Benzinger TNL / TRP I CNC Precision Lathe Manufacturer's specifications, deviations are possible. Center height: 80.5 mm Max. turning length: 100 mm Max. swing diameter over bed: 220 mm Max. swing diameter over cross slide: 130 mm Max. travel length in x direction: 300 mm Max. travel length in z direction: 240 mm Power supply: 380 V 50 Hz CNC Numerical Control: Bosch CC 100 T Accessories/Special Equipment: TRP Swing Loader Lhjdpfx Aashufc Eozol Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 24xx, For sale is a used but fully functional D6 with a turret; the machine was still in production up until it was shut down. The sale of the machine excludes any kind of guarantee or warranty! Sold as seen! Lhodpfx Aajx Nphcozol

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine Type CNC long-turn lathe / long-turning machine Manufacturer Maier Werkzeugmaschinen Model ML 18 B Year of Manufacture: 2002 Machine/Serial No. 01/117 Control System: GE Fanuc Series 18i-T Axes: 6 Maximum number of tool positions: 12 Main Spindle C-axis + 5° mechanical indexing Counter Spindle C-axis + 5° mechanical indexing Connected Load 16 kW Rated Current 60 A Control Voltage 24 V DC Wiring Diagram No. 1303-E200 Coolant Integrated coolant treatment / filter system Ljdpezuy S Hefx Aazohl Bar Feeder FMB Turbo 3-26/3200/C, Year of Manufacture 2001 Chip Conveyor Maier ML-SF

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,000 h, functionality: fully functional, spindle diameter: 32 mm, Equipment: bar feeder, chip conveyor, CNC Swiss-type lathe with comprehensive equipment! Main spindle diameter: 32 mm MACHINE DETAILS Operating hours: 18,000 EQUIPMENT Synchronously driven guide bushing C-axis on main and sub-spindle Workpiece conveyor belt Lhodpfxsxc I Apo Aazsl Collet sleeve main spindle: F37 (673-53) Collet sleeve sub-spindle: F37 (673-73) 3-spindle cross drilling unit 4-position tool holder 16x16 mm Sub-spindle (32 mm sub-spindle capacity) Parts blower to the front Parts ejector Parts ejection safety device Cut-off tool breakage safety device Separate coolant tank with level and flow monitoring Automatic central lubrication unit with oil level monitoring Leveling bolts and plates Toolbox FMB Turbo 3-26 bar feeder, year of manufacture: RS232C interface for bar feeder Fire extinguishing system Kraft & Bauer / GUT Feuerschutz Mayfran chip conveyor

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself. Ledsvivmyjpfx Aazshl

Condition: excellent (used), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 Ljdpfjxp I D Tex Aazehl 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Lodpfoxpuu Ejx Aazohl Space requirement approx.: 6000 x 2300 mm

Condition: good (used), Benzinger TNL NCS1J Lathe  Manufacturer's machine data, deviations possible.  centre height: 80 mm max. turning length 100 mm max. turning diameter over. bed 220 mm max. revolving diameter over. face slide 140 mm max path length in x 300 mm max path length in z 240 mm Mains connection: 380 V 50 Hz Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request! Lhsdpfx Aaog Icb Eezel

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Main and counter spindle • Maximum turning diameter: 32 mm • Maximum spindle bore: 32 mm • Maximum spindle travel (turning length): up to 310 mm • Spindle speed (main & counter spindle): up to 6,000 rpm • Spindle power (main spindle): 5.5 kW • Spindle power (counter spindle): 3.7 kW • C-axis: Available on both the main and counter spindle (0.001° or 5° mechanical indexing) Lhodpfezvfupsx Aazjl Axes and control • Number of axes: 9 controlled CNC axes (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3). • Rapid traverse speed: 32 m/min. • CNC control: MAIER PRO - GE FANUC (Fanuc 18iT) Tooling system and machining • Total number of tool positions: Up to 24 tool stations (depending on the configuration, up to 16 of these are powered/rotating). • Cross-axis machining: Typically 5 to 6 fixed turning tools (shank cross-section 16x16 mm) and 4 powered stations. • Back-side machining: Available for simultaneous operations on the main and counter spindle. Dimensions and weight • Machine weight: approx. 3,800 kg to 4,200 kg (machine weight only, excluding bar feeder). • Dimensions (L x W x H): approx. 2,640 mm × 1,600 mm × 1,900 mm. • Coolant capacity: approx. 240 liters

Condition: used, Year of construction: 2018, machine/vehicle number: V842A0141, Machine with SIEMENS Sinumerik 840 D control, serial number V842A0141, year of manufacture 2018. Max. bar diameter 42 mm, max. feed length 180 mm. 8 independently driven spindles, max. spindle speed 4,500 rpm, power per spindle motor 11 kW (total power 88 kW), max. spindle torque 66 Nm, drum shifting time per spindle position 1 s. Max. 8 longitudinal slides, max. 7 cross slides, 1 facing slide. Machine dimensions without peripherals approx. 7,100 x 2,400 x 3,300 mm, control cabinet dimensions approx. 5,000 x 600 x 2,300 mm. Machine weight approx. 18,000 kg, control cabinet weight approx. 2,500 kg. Bar loader IEMCA PRA 52/P/33, year of manufacture 2018, serial number 021809EA02. With chip conveyor, filter system ZPS 925A1851C1, year of manufacture 2018, serial number 0037, and cooling unit. Without tools. Lhjdezqy Srepfx Aazol

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 4 [mm] Lodpfx Aaozzfk Ijzshl - Travel : 24 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1580 x 1100 [mm] - Machine height : 1505 [mm] - Machine weight : 800 [kg]

Condition: used, Year of construction: 2016, machine/vehicle number: V842A0096, Machine with SIEMENS Sinumerik 840 D control, serial number V842A0096, year of manufacture 2016. Max. bar diameter 42 mm, max. feed length 180 mm. 8 independently driven spindles, max. spindle speed 4,500 rpm, power per spindle motor 11 kW (total power 88 kW), max. spindle torque 66 Nm, drum indexing time per spindle position 1 s. Max. 8 longitudinal slides, max. 7 cross slides, 1 facing slide. Machine dimensions without peripherals approx. 7,100 x 2,400 x 3,300 mm, control cabinet dimensions approx. 5,000 x 600 x 2,300 mm. Machine weight approx. 18,000 kg, control cabinet weight approx. 2,500 kg. Bar feeder IEMCA PRA 52/P/33, year of manufacture 2018, serial number 021813EA02. With chip conveyor and filter system ZPS 925A1851C1F, year of manufacture 2016, serial number 0013. Without tools. Lsdszqy Slspfx Aazjhl

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Ljdpfsruqzcex Aazjhl

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws Lsdpjzzahzefx Aazshl - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible. Lhjdpfx Aajxaphnozjl

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Lodpfx Aasxaphuozehl

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Ledpfxowcxf De Aazjhl Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!