Used Teach In Lathe for sale (5,836)

Condition: used, Finishing lathe BOLEY + 2nd machine (defective) as a spare parts donor Lajdpfev Hpurex Ag Noh

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Laodpfjxqbhnox Ag Njh Centre height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works

Condition: good (used), Year of construction: 1987, Turning length 600 mm Swing diameter over cross slide 260 mm Lasdpfx Aexl Uvhog Nsh Swing diameter over bed 520 mm Travel X = 290, Z = 700 mm Turret with 12 stations (not driven) Tailstock Coolant pump Chip conveyor Weight 12,000 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, chuck outer diameter: 315 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, turning diameter: 400 mm, total length: 5,200 mm, total height: 3,500 mm, total width: 6,300 mm, rotational speed (max.): 4,000 rpm, torque: 460 Nm, overall weight: 9,900 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC400, year of manufacture 2006. Equipped with a Siemens 840 D control system. Laodpew Dy Euefx Ag Nsh Equipment: - Infeed and outfeed conveyor (O-belt) - Pneumatically controlled transfer unit - Stamping unit - Chip conveyor (rear ejection) - Coolant system - Tool turret 12x VDI40 - Oil mist extraction Known defect: - Interior workspace lighting The machine is powered and can be inspected.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Laedpfow Ebngex Ag Neh Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 72 mm, turning diameter: 580 mm, center height: 290 mm, turning length: 1,500 mm, bed width: 400 mm, Turning diameter in gap: 780 mm, overall weight: 3,200 kg, Centre height: 290 mm. Swing over cross slide: 380 mm. Swing in gap Ø: Ø780 mm. Distance between centers: 1500 mm. Spindlebore: 72 mm. RPM.: 25-2000 (Variable). Lasdjxpf D Dspfx Ag Nsh Width of bed: 400 mm. Tail stock taper: 5 Motor: 11 kW. Digital readout: Newall C80 (X & Y). Year: 2008 Country of origin: Bulgaria. Size (L x W x H): 3100 x 1300 x 1600 mm. Weight: 3200 kg. Ø315 mm. selfcentering chuck, variable speed in 3 gears. Automatic feed and rapid speed through joystick. With quick tool changer. All our machines are tested and serviced before delivery.

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,600 mm, turning diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-16/20R with Fanuc 31i-B Table Diameter: Ø1,600 mm Max. Swing Diameter: Ø2,000 mm Max. Turning Height: 1,600 mm Table Speed: Max. 250 rpm Table Load Capacity: 8,000 kg Table Indexing Speed: 720°/min Table Indexing Accuracy: 0.001° X-Axis (Ram horizontal): -100 mm to 1,170 mm Z-Axis (Ram vertical): 900 mm Drive Spindle Speed: Max. 2,000 rpm Ram Size: 240 mm x 240 mm Milling Spindle Taper: ISO 50 Tool Shank Size: 40 mm x 40 mm Crossrail (vertical travel): 250 mm x 3 stages (hydraulic) Table Drive Motor: AC 37/45 kW (continuous/30 min. duty) Milling Spindle Drive Power ISO 50: 15/18.5 kW (continuous/30 min. duty) Control System: Fanuc 31i-B Display Unit: 15-inch TFT-LCD Memory Capacity: 1 MB Automatic Tool Changer: 24 positions (for 7 turning tools + 1 cover + 16 milling tools) Standard Tool Holders: New 240 TCR-01 (2 pcs) Splash Guard: Table version (R-Type standard design) External Coolant System: 3 bar (80 l/min) Chip Conveyor: Hinged belt type Table Bearing Cooling Device 4-Jaw Independent Manual Chuck Foundation Anchor Bolts / Base Plates Maintenance Tools and Toolbox Hydraulic Power Unit Work Area Lighting Signal Lamp: 3 colors (green, red, yellow) Operating Manuals (English): 1 CD with Fanuc manuals and 3 books with mechanical/electrical manuals Power Supply: 220 V, 60 Hz, 3-phase Machine Color: Manufacturer standard OPTIONAL ACCESSORIES (#1) Turning Tool Holder: Type 240TCR, 4x included Rigid Tapping: 1x included OPTIONAL ACCESSORIES (#2) Automatic power-off for N.C. - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3-phase - on request Linear scales X-, Z-axis (Fagor, Spain) - on request Workpiece measuring device - on request Tool measurement TS27R, Renishaw - on request Laodpfx Ajxp Nb Teg Njh Other information: INSTALLATION, COMMISSIONING, TEST OPERATION, AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Image shows machine with pallet changer. The offered machine DOES NOT INCLUDE A PALLET CHANGER! Errors in technical data excepted. The scope of accessories is as described in the text of this article only. There is no entitlement to any other accessories, such as those shown for illustration purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: L & Z Lathe Weiler Year of manufacture approx. 1966 Centre height 140 mm Swing diameter 280 mm Over carriage 180 mm Turning length 800 mm Spindle bore 24 mm Spindle speeds up to 1600 rpm Lodpoxqbd Nofx Ag Njah Drive power 2 kW Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location

Condition: good (used), Year of construction: 1986, Turning length 600 mm Laedpfx Agsxl Urij Njh Swing diameter over cross slide 260 mm Swing diameter over bed 520 mm Travel X = 290 mm, Z = 700 mm Turret with 12 stations (non-driven) Coolant pump Chip conveyor Weight 12,000 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 6,000 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 450 mm, total length: 8,720 mm, total height: 3,888 mm, total width: 4,325 mm, type of input current: three-phase, torque: 585 Nm, overall weight: 18,000 kg, controller model: Siemens 840 D sl, For sale is a Hessapp DVT400, year of manufacture 2022. Equipped with a Siemens 840 D sl control system. Equipment: - Infeed and outfeed conveyor - Chip conveyor (discharge right) - Coolant system Lasdpsw D Apcofx Ag Noh - 2x tool turrets 12x VDI50 The machine is connected to power and can be inspected.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn L44 CNC Premium CNC lathe direct from the manufacturer. L44 CNC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and long service life. Dimensions and weights Width/depth max. 2300 mm Length approx. 2530 mm Width/depth approx. 1595 mm Height approx. 1795 mm Weight approx. 2600 kg Working areas Lathe chuck diameter 150 mm Lathe chuck Hydraulic control of the clamping movement Center height 223 mm Center width 850 mm Swing diameter over machine bed 446 mm Swing diameter in the bed bridge 520 mm Swing diameter over cross slide 240 mm Bed width 300 mm Motor torque X-axis 6 Nm Z-axis 8.5 Nm Speed range Number of speed ranges 1 Speed range 10 - 3000 min¯¹ Electrical data Drive motor power 7 kW Supply voltage 400 V Mains frequency 50 Hz Electrical connection Lasdjw Ea Tuspfx Ag Njh Total connected load 23 kVA Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Hydraulic system Motor output 0.75 kW Tank capacity 50 l Coolant system Coolant pump output 270 W Tank capacity 90 l Machine data Chuck opening diameter 40 mm Motor(s) Torque drive motor 33 Nm Tailstock Mounting MK 4 Quill stroke 165 mm Quill diameter 52 mm Spindle Spindle holder DIN ISO 702-1 No. 5 Spindle bore/bar passage diameter 52 mm Control system Type Sinumerik 828D PPU 240 System software SW 24 CNC memory 3 MB Look Ahead 50 Block change time 3 ms Number of tools 128 Travel distance X-axis 250 mm Z-axis 760 mm Vertical spindle Power drive motor continuous operation S1 7 kW Power drive motor S6-30 % operation 16 kW Drive motor torque 33 Nm Drive motor S6-30 % operation 80 Nm Feed rate Speed X-axis 15000 mm/min Z-axis 15000 mm/min Feed force Feed force X-axis 7.5 kN Feed force Z-axis 5.3 kN Tool changer Hydraulic type; VDI 30 Number of tool positions 8 pcs Mounting height, width square max. 20 x 20 mm Boring bar mounting diameter max. 25 mm SIEMENS SAFETY INTEGRATED Equipment Main spindle - Solid design Machine bed - Heavily ribbed - High rigidity and durability Guideways - Stable flat bed guide Recirculating ball screw - For high rapid traverse speeds in all axes - Less wear and tear - For high positioning and repeat accuracy Cast body - Hardened HRC48-52 and heat-treated Machine feet - Six pieces - Optimum alignment of the machine Heat exchanger - Closed switch cabinet with intelligent cooling management - Optimum temperature even at high outside temperatures Tool changing system - Eight tool stations - Hydraulic VDI30 tool changer - Pick-up height max. 20 mm Hydraulic unit - Motor power 750 W - Tank capacity 50 liters - Clamping pressure / operating pressure 2,500 - 2,942 kPa Three-jaw chuck - Hydraulic three-jaw lathe chuck Ø 150 mm - Hydraulic loosening and clamping via foot switch - Simple clamping of workpieces - Hard and soft block jaws Central lubrication system - Automatic supply at intervals - Reduces wear on bearings, ledges and ball screws - With float switch. An acoustic signal sounds if the oil level is too low

Condition: used, functionality: fully functional, turning diameter over cross slide: 375 mm, spindle bore: 90 mm, turning diameter: 560 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 25 rpm, bed width: 385 mm, overall weight: 3,400 kg, Centre height: 280 mm. Swing over cross slide: 375 mm. Swing in gap Ø: Ø830 mm. Distance between centers: 2000 mm. Spindlebore: 90 mm. RPM.: 25-1250. Lsdpfx Agsxpf A Hs Njah Width of bed: 385 mm. Tail stock taper: 5 Motor: 11 kW. Digital readout: Electronica EL-400 (X & Y). Country of origin:Germany. Size (L x W x H): 3650 x 1250 x 2000 mm. Weight: 3400 kg. With gap, quick tool changer, steady rest and Ø400 mm. 4-jaw independant chuck. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm Lajdpfx Asxmk E Ujg Noh workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: ready for operation (used), Year of construction: 2004, Immediately available from Swiss toolmaking: Gildemeister lathe, type NEF 320 K, year of manufacture 2004, control Siemens Sinumerik 810 DL Touch. Swing over bed 320 mm, swing over cross slide 150 mm. Travels X 255 mm, Z 800 mm. Spindle head size 6, spindle bore 52 mm. Y feed rate 4 m/min. Drive 7 kW. Plan travel 185 mm. Distance between centers 750 mm. Tailstock ISO MK 5, diameter 70 mm, quill stroke 120 mm. Chuck with various jaws. Multifix B toolholder with inserts. Weight 2 tons. Price: EUR 6,500—plus VAT ex location. Lasdpfx Agjxqbdcj Nsh

Condition: used, Year of construction: 2014, turning length 650 mm turning diameter 320 mm centre height 160 mm turning dia. over face-slide 190 mm quill: 3 MK spindle bore 42 mm turning speeds 25-5000 U/min centre distance 650 mm Number of working hours 637 h total power requirement 8 kW weight of the machine ca. 1250 kg Laedpoxn Txajfx Ag Njh dimensions of the machine ca. 1,6 x 0,5 x 1,7 m Weiler Praktikant VC Plus lathe, built in 2014, from a test workshop, in excellent condition! Features: All 99 storable tools can be programmed separately with feed rate and speed or constant cutting speed. Separate control of speed and feed rate via potentiometer is also possible. Thread pitches are freely programmable and feature electronic limit switches. Additional electronic stops can be set for lengths and diameters. A coolant device is not available. 8" colour screen Energy recovery Accessories: The machine includes a quick-clamping device with 30 collets 5 to Dmr 26 mm, 3-jaw chuck made by Röhm including 10 sets of soft jaws,centring tips, tailstock mounts (MK 3) for thread cutting with threaded drills and dies by hand, 15 Multifix holders size A, turning head for Multifix holder for producing bolt circles,spindle and bed stop, tool cabinet with 12 drawers, WP holder for internal and external machining, drills, reamers, standard thread gauges up to M10, comprehensive documentation on operation and maintenance. Translated with (free version)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 83,799 h, functionality: limited functionality, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 315 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, turning diameter: 400 mm, total length: 5,200 mm, total height: 3,282 mm, total width: 6,300 mm, rotational speed (max.): 4,000 rpm, torque: 460 Nm, overall weight: 10,000 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC400, year of manufacture 2006. Equipped with Siemens 840 D control. Equipment: - Infeed and outfeed conveyor (O-belt) - Pneumatically controlled transfer unit - Stamping unit - Chip conveyor (discharge left) - Coolant system - Tool holder 12x VDI40 Lajdow Dyziopfx Ag Neh Known defects: - Loading flap - Interior lighting The machine is under power and can be inspected.

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Lsdpfx Agsxn Axcs Noah

Condition: good (used), functionality: fully functional, spindle bore: 95 mm, center height: 450 mm, turning length: 3,000 mm, total length: 6,000 mm, total width: 2,000 mm, total height: 1,900 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, type of input current: three-phase, overall weight: 8,000 kg, three-jaw chuck diameter: 500 mm, With Ø500 mm. selfcentering chuck, 2 steady rests, follow rest, spindle stops, Ø600 mm. 4-jaw independent chuck and lots of equipment. Lasdpfxexn Rk To Ag Njh All our machines are tested and serviced before delivery.

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Laedpfx Agjuyg Dnj Njh

Condition: ready for operation (used), Year of construction: 2008, Immediately available ex location: CNC lathe Gildemeister Type CTX 410 Year of manufacture: 2008 CNC control: Heidenhain Plus Turning diameter: 320 mm Turning length: 600 mm Swing diameter: 505 mm Spindle bore: 87 mm Bar capacity: 65 mm Chuck diameter: 250 mm Turret with 10 stations VDI 30 Lodpfx Agexqbb Uo Njah Spindle speeds up to 5,000 rpm Drive power: 21 kW Chip conveyor Coolant unit Documentation Tailstock Weight: 6 t Price: EUR 12,000 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated transfer unit - Stamping unit Laedsw Dyqdspfx Ag Noh - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection.

Condition: as good as new (ex-display), The Numturn S 560/1500 is a state-of-the-art CNC Flat Bed Lathe designed for the Lathes category, offering high performance for large workpieces. This machine boasts a robust box-way design that ensures maximum precision while facilitating heavy machining tasks. Its powerful Siemens servo motor drives the main spindle through a 4-step transmission, allowing for infinitely variable spindle speeds and high torque across various speeds. Equipped with an 8-station VDI tool changer, the Numturn S 560/1500 maximizes productivity and flexibility in operations. The user-friendly Siemens 828D control enables quick setup through two electronic hand-wheels, resembling manual lathe operation for enhanced user experience. With a hydraulic tailstock featuring high clamping force and a reliable automatic central lubrication system, maintenance is efficient and straightforward. For those looking to enhance their productivity, the Numturn S 560/1500 represents an excellent solution in CNC Flat Bed Lathes. To learn more about this machine or to request a quote, don’t hesitate to contact us. Lasdjuyg Erspfx Ag Neh

Condition: ready for operation (used), Year of construction: 2009, Immediately available from site: CNC Lathe Westekemper Type West Turn 1740 NC Year of manufacture 2009 CNC control FAGOR 8055 CNC Swing over bed: 400 mm Swing over cross slide: 235 mm Centre distance: 1000 mm Spindle bore: 86 mm Spindle speeds: 10 – 2000 rpm Drive: 7.5 kW Tailstock: MK 5 Tailstock quill travel: 160 mm Laedpfsxqbbuex Ag Njh Lots of accessories Price: €5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: CNC lathe Gildemeister Model CTX 400 Series 2 Year of manufacture: 2000 Heidenhain Pilot control Turning diameter: 570 mm Swing diameter: 470 mm Turning length: 600 mm 12-position driven turret Centre distance: 625 mm Spindle bore: 65 mm Ljdpfxsxqbbns Ag Nsah Spindle speeds up to 5000 rpm Drive power: 21 kW Chuck: 200 mm Tailstock Chip conveyor Price: 9,500 EUR plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2011, Immediately available ex stock: Cycle-controlled lathe DMT Kern Type CD 820 Control system: Siemens Sinumerik 840 D Laodsxp Umhopfx Ag Nsh Year of manufacture: 2011 Operating hours: 4,625 CNC control: Siemens Sinumerik 840 D / DE Drive: 46 kW Automatic turret with 8 stations Swing over bed: 820 mm Swing over cross slide: 520 mm Travel of cross slide: 600 mm Spindle bore: 132 mm Spindle speeds: 1 – 1800 rpm, constant V Transversal feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches (mm): 0.01 – 999.9 Rapid traverse longitudinal: 7 m/min Tailstock quill stroke: 280 mm Taper MK 6 Chuck: 400 mm 3 steadies Self-centering automatic steady rest Hydraulic steady rest Many tools included Weight: 18 t For a price of EUR 37,000 plus VAT, ex location.