Used Testing Press for sale (34,352)

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Nodpfexabcwjx Ah Sswn Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: ready for operation (used), Year of construction: 1998, operating hours: 34,327 h, This 5-axis TRUMPF TrumaBend V130 press brake was manufactured in 1998. It features a 3-meter bending length and a 130-ton capacity, with a stroke of 215mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V130 machine we have for sale. Contact us for more information about this machine. Application Types Bending Nwsdpfxjxnd Tbs Ah Sen

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: very good! Function tested. Nwsdoxp Dnhspfx Ah Sjn FLITS Rental & Sales service: With every machine, we provide a bundle of baling wire (120 wires). Need more baling wire bundles? Request a free quote without obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and individuals. We focus on delivering efficient solutions in internal logistics, cleaning, waste processing, and working at heights. Waste baler, Paper baler, Cardboard baler, Plastic baler, Waste compactor, Recycling, Textile baler, Waste processing.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97102, type of input current: three-phase, input voltage: 220 V, pressing force: 10 t, compressed air connection: 6 bar, Baier Prägepressen GEBA 4/B Hotstamping Machine Pressing force: 10 tons This machine was used for decorating plastic objects by means of hot stamping technology. Suitable for printing with gold and silver foil. The machine is also equipped for positioning and printing heat transfers. Nwedpsxpudgefx Ah Sjn Very robust construction. Works well. The machine is equipped with a sliding table for printing smaller quantities, using a single holding jig. Also included is a Weiss rotary table with eight positions, enabling high production speeds with eight product holders in operation.

Condition: reconditioned (used), functionality: fully functional, Dough Divider and Rounder Njdpfx Aov T N Sqsh Sswn TOP model roll press Fortuna Automat Gr. 3+ with rounding deactivation Intervention guard with safety corners Electric head cleaning to the rear Dividing head with NEW stainless steel knife Dough input up to 2400g depending on dough hydration Dough divider with 3 new rounding plates Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Refurbished used machine with warranty + spare parts service Option: Platform or undercarriage Rounding plate Service package Maintenance contract E-box Delivery service Instruction & commissioning Find top dough dividers in our large showroom!

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 T - Maximum working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width / clear height: 1500 mm - Distance between columns: 2050 mm - Maximum lateral cylinder displacement: 1450 mm - Maximum longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil is not included in the delivery scope - Hydraulic power packs are mounted on top of the press - Hydraulic manifold and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Hydraulic cooling by air and water cooler - Stroke cylinders integrated into the working table Rod diameter: 25 mm - Stroke: 80 mm - Control via cylinder control system or hydraulic power unit with manual lever control - 10 stroke cylinders installed - Digital control with stroke measurement via encoder and pressure measurement with digital readout - Siemens KTP 900 – 9" touchscreen for programming (up to 99 programs): - Maximum up and down stroke of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure setting - Piece counter - Pre-stop up/down stroke with accuracy of 0.1 mm - Alarm management - Frame-mounted display for real-time operating parameter monitoring - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic power pack with solenoid valves (replaces pendant control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - PLC system by SIEMENS (S7-1200 series) - Siemens LCD touchscreen (9") MTP900 fitted in the control cabinet - Electrical components from SIEMENS, ALLEN BRADLEY and PHOENIX - System pressure of the pressure cylinder adjustable via LCD touchscreen - Operating mode (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable Nedpfxsxrb Nbs Ah Sown - 99 recipes storable; all aforementioned values can be programmed per recipe - Activation via wireless remote - Dual button for slow/fast up and down movement, emergency stop, and movement confirmation - Touch-sensitive safety strip mounted at the bottom of portal columns for safety - Control cabinet mounted to bridge sidewall - Anti-rotation device for the cylinder - Oil temperature displayed on LCD touchscreen - Overheat warning for hydraulic oil displayed on LCD touchscreen - Filter contamination status displayed on LCD screen - System faults displayed on LCD touchscreen - Pressing status information displayed on LCD display - Once oil temperature reaches 45°C, the air cooler begins operating to cool the oil. If 65°C is reached, the machine stops operation until it cools back to operating temperature. - Operating manual included - System complies with all essential safety and health requirements according to CE regulations.

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec Njdpfx Ajxaayhoh Sswn engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: good (used), Hand screw press, mandrel press, spindle press, hand spindle press, mandrel press, rack and pinion press, workshop press -Arbor press. Rack and pinion press, solid design -Projection: 210 mm -Height: min 35 mm / max 350 mm -Dimensions: 435/230/H550 mm Nsdpfx Ahoxni Hye Sewn -Weight: 51 kg

Condition: like new (used), 1 used press table in very good conditionDimensions: 500 x 380 mm Nodpfx Aod Tmfmoh Sjwn

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Stock no.: 9960 Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Nwjdpjxn Ilzefx Ah Son Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions (WxDxH): 1700 x 1800 x 2200 mm Weight: 2430 kg Materials: Paper, Cardboard, Film Operating manual is available. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the given specifications or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex-works, without warranty or guarantee. Our payment terms are 100% advance payment.

Year of construction: 2025, condition: new, functionality: fully functional, NEW NEW Bun Divider Rounder NEW NEW Fully Automatic Dough Divider and Rounder Daub Model: Divider Automat 3-30 "The Original" with 3 rounding plates Dividing range: 30 to 100 grams per piece Division: 30 pieces with stainless steel knives Easy operation with 10 programs User-friendly and simple cleaning position! Dough ring with Teflon coating and "easy click" Reinforced pressing head Interchangeable knife head Machine is on castors Capacity: up to approx. 6000 pieces/hour Exclusively with us: DGUV V3 safety tested Connection: 400V, 1.3 kW, 16A-CEE plug Dimensions: 620 x 660 x 1700 mm (W x D x H) Weight: 345 kg New machine & SAB tested With warranty & spare parts service Options: Leasing & rental service Rounding plates Maintenance contract Service package Delivery service Installation & commissioning by master baker Large selection of dough dividers in stock! Nsdpfx Aju Rzncoh Sjwn

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, 40T H-Frame Press with Ram Table • Press capacity: 6-40 T (adjustable) • Maximum installation height: 700 mm • Usable area, lower table: 1000 x 600 mm • Usable area, ram: 1000 x 600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 pcs, at the corners) • Table height from floor: 800 mm • Overall dimensions approx. (W x D x H): 2,100 x 1,600 x 3,500 mm • Total weight approx.: 3,500 kg • T-slots and drill holes made to customer specification. HYDRAULIC CYLINDER: • Piston stroke: 0-500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 pc) • Piston rod diameter: Ø 80 mm (1 pc) • Max. operating pressure: 260 bar • Return speed: 90 mm/sec • Ram speed: 9 mm/sec • Idle speed: 80 mm/sec HYDRAULIC UNIT: • Hydraulic pump (brand: ASC): 67+8 L/min (1 pc) • Motor power: 4 kW (1 pc) • Pressure accuracy during pressing stroke: +/- 5 bar • Hydraulic unit is mounted at the rear upper section of the press. • Hydraulic manifold and valves by DUPLOMATIC. • Manometer for pressure display. • Air filter and oil filter brand: FILTREC. • Equipped with an electronic oil level switch. • Air cooling (cooler) is used for hydraulic cooling. • Pressure adjustable via pressure switch. • Control via sensor. • Safety cover (door) located at the rear of the press. • Safety light sensors and internal lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic unit main motor connection: 4 kW • Total power supply: Approx. 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Mode selector switch: Yes (lockable) • Electrical equipment brands used: SIEMENS, ALLEN BRADLEY, SICK. Nwsdpfx Ahjxrby He Sjn

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec Nwsdpfxjxaar Do Ah Sen oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press Nwjdsigwdwopfx Ah Ssn -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: good (used), Bending length / working length: 2,500 mm Pressing force / bending force: 1,500 kN (≈ 1,500 kN) Max. sheet thickness (steel): approx. 2.0 mm Max. sheet thickness (aluminium): approx. 3.0 mm Max. sheet thickness (stainless steel / higher tensile strength): approx. 1.25 mm Max. bending height: approx. 300 mm (depending on model) Power / capacity (electric): 24 kW Machine dimensions: 4,050 × 1,600 × 2,400 mm Weight ~ 13,000 kg Nwsdpfx Aoxgh T Ash Ssn

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, As-new CNC press brake from Euromac Model: FX Bend 1547 Capacity: 1500 x 47 tons Year of manufacture: 2022 Njdpfx Ahsxlivpe Sswn CNC controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 Hydraulic WILA top and bottom clamping Laser safety system with angle measurement option Includes 1 set of tooling

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, total width: 600 mm, total length: 700 mm, total height: 1,520 mm, power: 1 kW (1.36 HP), DGUV certified until: 12/2027, overall weight: 375 kg, New NEW Dough Divider Press NEW NEW Semi-automatic Dough Divider and Rounder, Model: 3-30 NEW Proven technology ... the "Original"! Blades with easy cleaning position! Includes 3 rounding plates Dough ring with easy click coating Portion range: 30 to 100 grams per piece 30-piece division Machine is mobile DGUV V3 tested exclusively by us Connection: 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) NEW machine & SAB certified With warranty + spare parts service Options: Leasing & rental service New rounding plates Maintenance contract Service package Delivery service Instruction & commissioning Nodpfxeu Eai Us Ah Sjwn Many dough dividers available immediately from stock!

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins Nwsdsxaakgopfx Ah Sjn * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: good (used), Year of construction: 2021, Hand screw press, arbor press, screw press, hand screw press, pressure press, balance pressure press -Manufacturer:unicraft, Hydraulic workshop press type WPP 15 E -Piston feed: optionally with hydraulic hand pump or foot lever -Pressing force: 15 t -Piston stroke: 160 mm -Piston diameter: 43 mm -clear height: min: 173 / max: 985 mm -Light width: 500 mm -Frame depth: 120 mm -Dimensions: 1160/860/H1750 mm -Total weight: 89 kg Njdpfewxr Scex Ah Sown

Condition: good (used), Year of construction: 2005, used bending press, Graebener brand, type GRNM, year of manufacture 2005 max. bending force 16 t. tool length 1,600 mm adjustment of the lower swing arm, hydraulic 2 cylinders dimensions 5080 x 3290 x 2540 mm Nwsdpevvlllofx Ah Sen weight 65 t.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, power: 1 kW (1.36 HP), DGUV certified until: 12/2027, overall weight: 375 kg, NEW NEW Roll Divider NEW NEW Nwjdpsu Eaudofx Ah Sjn Semi-automatic dough dividing and rounding machine, Model: 4-14 NEW Matured technology ... the original! Blades in an easy-to-clean position! Equipped with 3 rounding plates Dough ring coated with easy-click feature Portion range: 130 to 250 grams/piece Division: 14 pieces Machine on casters Only from us: DGUV V3 tested Connection: 400V, 0.75 kW, 16A CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) NEW machine & safety tested by SAB With warranty & spare parts service Optional: Leasing & rental service Extra rounding plates Maintenance contract Service package Instruction & commissioning with master baker Loan machine service Many more roll dividers in stock!

Condition: as good as new (ex-display), Year of construction: 2021, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed Nwjdpfx Ajxaabfjh Son * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: good (used), Year of construction: 1989, Used Darley CNC press brake, type EHP 200, built in 1989 Nwjdpfx Aswaymksh Son Press force: 2000 kN Working width: 5200 mm Power: 15 kW Oil capacity: 160 l Weight: approx. 20,000 kg Including tools and accessories

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed Nwjdpfxjw U U Svo Ah Ssn - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Year of construction: 1985, condition: used, CNC RASKIN RT75 turret punching machine for sheet metal processing In addition a very extensive punching tool assortment.(see photos) The machine is in good condition and is sold for lack of space. The Lista drawer cabinets are not included in the offer, but can also be purchased for an additional charge. There is also a software available which is not included separately. Travel X 750mm Travel Y 1000mm Stations 16 Machining up to 6mm aluminum Nedsccl N Sjpfx Ah Sswn Machining up to 6mm steel Machining up to 3mm CNS