Used Wire Pin for sale (35,962)

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Hsdpfx Aetylpijg Njnu

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, High-Precision Wire EDM Machine AGIE Vertex 1 Year of manufacture: 2008 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): +/- 40 mm Taper cutting: Up to 3° at 80 mm height Available wire diameters: 0.05 mm to 0.2 mm Best achievable surface finish: Ra = 0.05 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Machine dimensions: 1400 mm x 1900 mm x 1970 mm Hnjdsxf Dwnspfx Ag Nsu Machine weight: 2,700 kg Including AGIEJOGGER handbox for convenient machine setup 15" LCD color display with lift-up keyboard and mouse AGIEVISION control Including AGIESETUP 3D Including AGIEDUO dual-wire system for automatic switching between two wire diameters The machine is cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your site and provide training in control and machine operation.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID:23123.5000 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Hnsdpfx Ageu Edaws Nsu Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Battery capacity: 48 v / 620 ah – NEW – YOM 2025 Options: - Triplex mast – FFL - PSA (Sick) - Induction / wire guidance complete LIKE NEW!!

Condition: good (used), Year of construction: 2008, operating hours: 16,000 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Work tank dimensions W x D: 1,264 x 973 mm Max. workpiece weight: 1,500 kg Distance floor to table surface: 1,000 mm Machine dimensions W x D x H: 2,100 x 2,800 x 2,350 mm Hnjdpexg Il Ssfx Ag Nsu Machine weight: 5,300 kg Travel of U and V axes: 770 x 520 mm

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Hodpfx Agerqfxws Nsnu

Year of construction: 2008, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Hjdpfsi Ezf Sex Ag Nsnu Used fine impact mill Hosokawa Alpine Contraplex CW 400 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material of construction: cast iron Wide chamber design, for processing greasy, oily, sticky materials, etc. which tend to form deposits Non Pressure Shock Resistant (NPSR), non gas tight Without wear protection Scope: Hosokawa Alpine CW 400 with pin discs and motors

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Hnsdpfsxcivqex Ag Nou Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2015 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): ±40 mm Max. taper: 3° at 80 mm height Includes F-Module, suitable for wire diameters from 0.02 mm to 0.2 mm Best achievable surface finish: Ra=0.08 µm Hsdpoxfvfwofx Ag Nsnu Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15” LCD color display with lifting keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg The machine will be cleaned, completely overhauled, and thoroughly tested by our specialist technicians. We are happy to install the machine at your site and provide training for both control system operation and machine handling.

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm Hsdpfsghnanex Ag Nonu -PVC coated -Length: approx. 50 m -Also other crane ropes available -Weight: 6 kg

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Hjdpfx Agswi Ubnj Njnu Constr. year: approx1970 diameter range: 2,8-4,2 mm nail length: 15-110 mm output - pieces/min: 350 Location: In our warehouse

Condition: good (used), functionality: fully functional, Due to discontinuation of operations, for sale from the Norderstedt location, unloaded. Hjdpfx Agern R Rfe Nsnu Kugler Paternoster punching machine, suitable for Wire-O and index/tab punching Format 50 x 50 cm Incl. 2 punching tools

Year of construction: 1987, condition: reconditioned (used), functionality: fully functional, Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this final product range thanks to its two contrarotating pin discs, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with pins impacts and projects the particles against the different pin rows reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding disc, the type of pins, air volume, feeding rate, etc. Technical details Cryogenic grinding machine (LN2) Construction material: stainless steel Non Pressure Shock Resistant (NPSR) Scope of supply Hosokawa Alpine 250 CW Contraplex pin mill with pin discs and motors Hsdpfxjrvh Hkj Ag Nonu A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Hnedpfxjwtd Ede Ag Nou

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Hodjuuz Iispfx Ag Njnu Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Hedpewt N Uqofx Ag Nenu More pictures and data will follow shortly.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: D12L/8271, Offer Number: D12L/8271 Machinetype: wire nail press Make: WAFIOS Type: N51 Constr. year: 1984 diameter range: 2,2-4,2 mm nail length: 13-105 mm output - pieces/min: 430 Hedswi Tgiopfx Ag Nsnu Location: In our warehouse

Condition: used, Year of construction: 2004, Travel path: X 500 mm Y 350 mm Hnedpfx Asw Emfdjg Nou Z 300 mm incl. cooler incl. large wire spools

Year of construction: 1985, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Hnodpfx Aohx N N Uog Neu Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 250 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material of construction: stainless steel, mainly AISI 316, Pharma finish Wide chamber design, suitable for cryogenic grinding (LN2) allowing it to process heat sensitive, greasy, oily, sticky, hygroscopic materials, etc. which tend to form deposits Non Pressure Shock Resistant (NPSR), non gas tight Without wear protection Scope: Hosokawa Alpine CW 250 with pin discs and motors

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: 1 x Xerox Versant 3100 with the following equipment: incl. Fiery Server EX3100 Hnsdpfxevf Hhye Ag Nsu incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Hedpfx Asxn Uyxeg Njnu Application Types EDM

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600) Hedpfxexnx Ite Ag Nenu

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 15 h, chain length: 71,000 mm, power: 2.2 kW (2.99 HP), INDUSTRIA 2 t, FEM/ISO 1Am/M4 - 5 m/min, low voltage control with 1 speed. Electric winch 2000 kg. Range of electric winches initially designed to meet the needs of the industrial sector. Hnedpfxjxbbupj Ag Neu Applications: All lifting or pulling/hauling tasks Industry Construction and public works Integration into cranes, etc. Pulling/hauling heavy loads Conveyor belt tensioning Opening hatches Lifting sluice gates Stage and event industry...

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ITALMEC TBNS/9 Wet Drawing Line 2022 - 25 m/s, Copper Bath, Near-New, Slippage-Free Description: Hnjdpfx Aexm Tq Heg Nou ITALMEC TBNS/9 WET DRAWING LINE - High-performance wire drawing machine for copper and alloy. This premium unit is offered as part of a two-line package sale. Year of Manufacture: 2022. Commissioned: 2023. Condition: Near-New (Only 20 tons of test operation completed). Detailed Technical Specifications: ● Machine Type: Multiple Wire Drawing Machine (Wet). ● Technology: New Generation Slippage-Free (Independent motor on each capstan). ● Max. Operating Speed: Up to 25 meters/second (m/s). ● Max. Inlet Wire Diameter: 3.5 mm (specific to wet drawing). ● Drawing Process: Designed for high cross-sectional reduction. ● Control System: AC Siemens Electrical Cabinet and integrated drives. ● Unique Feature: Factory-integrated COOPER BATH (Miedziująca Wanna) included. Commercial & Logistics Information: ● Original Purchase Value (This Unit): 160 000 EUR. ● Ancillaries: Complete Line Wiring (approx. 50 000 PLN value) is included in the package price. ● Current Status: Professionally Disassembled and secured, ready for immediate loading (EXW). ● Price: This line is sold as part of a two-line package (TBNS/9 + TBNS/9 Standard). Total package price: 259 000 EUR EXW. Inquiries for a single machine purchase are welcome. This is a rare chance to acquire a 2022-technology wire drawing machine with minimal hours, guaranteeing cutting-edge performance.

Condition: refurbished (used), Year of construction: 2025, Function The TAM 25/600 cuts off and face-grinds ejector pins, core-pins and punching-dies precisely within seconds! Workpieces from .032 to 1“ diameter, high speed steel or thungsten-carbide can be cut easily. Just insert the workpiece into the quick acting chuck, adjust to desired length and cut it at once. Optional there is an auxiliary chuck for very thin, short or stepped pins. Your advantages: • Quick acting chuck easy to use • Rapid insert and remove of workpieces • Cut-off and face-grind in one clamping • Auxiliary chuck for very thin, short or stepped pins After cutting off the work piece move it to end position, snap in lock-pin and measure it by a micrometer. Now finish workpiece to specified size by advancing the fixture using the micrometer screw. To dress the grinding wheel move grinding spindle forward. It will now be dressed automatically by the integrated dressing- diamond. This will leave the micrometer screw at 0-position at all times. Your advantages: • Precision advance of workpiece through micrometer-screw • Integrated dressing diamond for grinding-wheel • Water-cooled cutting and grinding in standard equipment • Adjustable grinding spindle to maintain zero "0" - position setting between cut-off and grinding-spindle The precision Drive motor 1,1 KW 400 V 1,2 HP 220 – 440 V Cut-off-spindle 11000 rpm 11000 rpm Grinding-spindle 4400 rpm 4400 rpm Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“ Cut-off-length limits 600 mm 23 – 5/8“ Hsdpfx Ajfig I Neg Njnu Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“ Net weight Kg 135

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading can be seen in good working condition Hnjdoxf I D Eopfx Ag Nju year 2002