Used Wood Dryer for sale (7,583)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Dcedpfx Ansyw Ndmjfeg Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 5,400 mm, inner dimension width: 750 mm, inner dimension height: 850 mm, total length: 6,500 mm, total width: 950 mm, total height: 1,500 mm, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We are offering this very well-maintained Lauber longitudinal flow dryer type 2 S6 chamber dryer, year of manufacture 2022. Type/Plant No.: 2 S-6 / 44217 Rated voltage: 3pH AC 400/230 V 50 Hz Fan motor rated power: 1.1 or 0.75 kW Fan motor rated current: 7.1 A Electric heater rated power: 7.5 kW Total rated power: approx. 15 kW Total rated current: 25 A Pre-fuse (slow-blow): 25 A Control voltage: 24 V DC Wiring diagram no.: SP361 RV Year of manufacture: 2022 Technical details: A double-shell thermal insulation of the wood dryer guarantees excellent insulation properties. The inner wall cladding is made from 1.5 mm thick, seawater-resistant special aluminium and is tightly welded. The outer cladding consists of stucco trapezoidal and stucco smooth sheet metal. The thermally insulated floor is designed as a tightly welded stainless steel tray and is permanently resistant to aggressive wood substances. The wood dryer should be installed on a stable, level surface; no special continuous foundation is required! A front door with a wide opening angle and all-round rubber seal ensures convenient operation and high steam tightness. An aluminium trolley for side loading and unloading, along with interior rails and removable exterior rails, enables comfortable and space-saving loading. Efficient and uniform longitudinal ventilation of the wood stack is ensured by a powerful radial fan (0.55 kW) mounted on the end face. The chamber is heated by electric heating rods with a heating capacity of 6.0 kW. Excess moisture is extracted via servo-controlled 100 mm intake and exhaust dampers. Chamber humidity can be increased if necessary by cold water atomization. 140 straight aluminum stacking battens are included in the delivery. The standard PLC control (SPS) regulates the drying process fully automatically and, thanks to a 7'' color touch panel, offers user-friendly operation. Simply enter three parameters: 1. Wood species 2. Lumber thickness 3. Desired final moisture content Based on this data, the system optimally controls the drying process, allowing you to obtain your wood in the desired quality in a short time. The standard control equipment includes: - 3 pcs. wood moisture measuring points with drive-in electrodes and sensor cables - 1 pc. wood equilibrium moisture measuring point Dcodoy Hdmnopfx Anfsg - 1 pc. air temperature sensor We supply the Lauber wood dryer fully assembled and ready for connection! Detailed operating instructions, drying recommendations, as well as installation and loading instructions are included. Original price: EUR 31,120 plus VAT Previous lead time: 15 months The dryer has been used for around 30 drying cycles and is in very good condition. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, operating hours: 237 h, We are offering a used cleaning machine for sale. TECHNICAL DATA Manufacturer: COMAC Model: Ultra 85B Year of manufacture: 2017 Operating hours: 237 h Fully functional Weight with battery: 1,600 kg Condition: used PRICE €6,950.00 net €8,270.50 gross incl. VAT YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. This item is available for collection. Delivery or shipping is possible at an additional charge. Shipping costs vary depending on destination and shipment volume and can be provided upon request. PROJECT PLANNING Our sales team will gladly prepare a non-binding, customized quote based on your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. PAYMENT TERMS Payment terms will be agreed upon when the order is placed. The price is per unit / net price, or as indicated in the description (plus VAT). You will of course receive an invoice with separately stated VAT. ABOUT US DLK, based in Nordhorn, trades in new and used equipment for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. For any questions, feel free to contact us. Djdjy Ep A Nepfx Anfecg Connect Four – The four success pillars of DLK: Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc. Dcedpjyuvp Aefx Anfog

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm Dedeyuut Hepfx Anfjcg -Weight: 14 kg

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) Djdpfxeyaalro Anfocg (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: Dcjdpfx Aeymm Nkenfjg - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Dcsdpfx Aoytd S Asnfsg Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: like new (used), CATALOG NUMBER 7969 TECHNICAL SPECIFICATIONS - Motor power: 11kW - Tank capacity: 500l - Noise level: 70dB - Max pressure: 10 bar Dcjdey Dfydspfx Anfjg - Performance: 1500 l/min - Performance: 90 m3/h - Voltage supply: 400 V / 50 Hz / 3 Ph - Dimensions (L/W/H): 1920x750x1600mm - Weight: approx. 420kg ADVANTAGES – Manufactured by the Polish company GUDEPOL – Screw compressor is equipped with a microprocessor control panel, informing the user about the compressor's operating mode – Not painted – Used machine – In excellent condition Net price: 16,900 PLN Net price: 4,030 EUR (at a rate of 4.2 PLN/EUR) (Prices may change with greater exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 Dedpoy Dqtpsfx Anfocg TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm Dcedpfx Aeyyyw Aonfog - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue No. 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from above and below - Shaft motors: 2×1.5 kW - Electric auto-reverse (adjustable) - With vibrating chute - Vibrating chute length/width: 3750×355 mm - Full vibrating chute dimensions: 3750x620x1210 mm Dcjdpfx Anoyi Tmzofog - Discharge with conveyor belt: 2970x340 mm - Conveyor belt dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight: approx. 2500 kg ADVANTAGES – German-made – with vibrating chute – With discharge conveyor – Auto-reverse – Used chipper, in very good condition Net price: 47,900 PLN Net price: 11,400 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NO. 6631 TECHNICAL DATA - Loading hopper opening: 285x305mm - Motor: 7.35 kW - Number of knives: 3 pcs + 2 counter knives - Knife size: 300x75mm - Screen (2 types): 10mm, 8mm - Extraction nozzle diameter: 100mm Dedpfx Anoy Drh Isfjcg - Dimensions (L/W/H): 1070x900x1980mm - Weight: 613kg ADVANTAGES – Swedish production – Additional screen included – Very good condition – Used chipper Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW Djdpfjy Drkvex Anfocg - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm – From above: - Kickback barriers (anti-return block for material) - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades Dcjdpfjyx Untsx Anfog - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) Dcjdjyka E Hspfx Anfsg – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7262 TECHNICAL DATA - Top loading hopper inlet 780x620mm - Bottom loading hopper inlet 650x620mm - Outlet for shredded wood Ø160mm - Rotor working width 600mm - Rotor diameter 248mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives 30 pcs Dsdpoytf Ixefx Anfecg - Knife dimensions 30x30mm - Screen 20x20mm - Press drawer - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight 1200kg ADVANTAGES – German-made – Original DTR documentation – Not repainted – Auto-reverse system – Press drawer – Very good condition – Used wood chipper Original photos Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate (4.2 PLN/EUR) (Prices may vary with larger currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm Djdpfjytf Ncox Anfscg - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, CATALOG NUMBER 7650 Technical data: - max working length: 1500 mm - max working diameter: 250 mm - milling (disc cutter): 7.5 kW - spindle – 2800 rpm 3 kW Dcsdpfeyyyt Rox Anfjg - spindle speeds: 700/1200/1500/2000 rpm - grinding unit: 0.75 kW - hydraulic motor: 3 kW - total power: 17.75 kW - air supply requirement: 6-8 bar - feeder for beams up to 150x150 mm - extraction port diameter: 100 mm, 160 mm - transport dimensions (L/W/H): 4350x2300x1980 mm - weight: approx. 3000 kg ADVANTAGES – German-made – automatic hydraulic duplicator – original DTR documentation – not repainted – used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number: 7888 TECHNICAL DATA Max. planing width: 410 mm Max. thickness of workpiece (double-sided): 200 mm Max. thickness of workpiece on side heads (four-sided): 140 mm – Top: Kickback fingers / anti-kickback devices 2 pull-in feed rollers, geared, spiral 2 rows of segmented pressure rollers Geared, spiral feed roller Pressure system 410 mm planing shaft, 4-knife – 5.5 kW Pressure system Smooth, outfeed feed roller – Bottom: Guide rail – present Adjustable infeed table with sliding roller 410 mm planing shaft, 4-knife – 4 kW 2 smooth sliding rollers – Rear: 2 side spindles 1) Right vertical 140 mm – 3 kW 2) Left vertical 140 mm – 3 kW Spindle diameter: 35 mm Spindles adjustable up/down and right/left Spindles positioned alternately 6 feed speeds Dust extraction outlet diameters: 2x100 mm, 1x150 mm, 1x170 mm Dimensions (L/W/H): 2170 x 1300 x 1260 mm Weight: 1603 kg ADVANTAGES – Suitable for wet and dry timber – Ideal for processing beams, flooring, etc. – Made by the German brand BAUERLE – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR Dcsdpfx Aoyyyunjnfjg Net price calculated at 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm Dcsdjy Athtopfx Anfjg - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Dcsdpfsyz Sgfex Anfsg Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm Dodpfx Aney Dqmisfecg - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Dcjdpfx Aex Tpukonfog Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7899 Technical data: - Chipper intake section: 410mm x 180mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve size: 60x60mm - Upper feed roller, toothed - Lower feed rollers: 2 units, toothed - Infeed belt length: 2180mm - Infeed belt width: 400mm - Autoreverse (adjustable) - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4300x1600x1100mm Dcsdpsymfg Iofx Anfsg - Weight: approx. 2000kg ADVANTAGES – Italian manufacture – Non-painted – Electric adjustment of body height – Used multi-blade saw, very good condition Net price: 69,900 PLN Net price: 16,640 EUR with the exchange rate of 4.2 (Prices subject to change with significant fluctuations)