Used Wood Frame-Bautisch for sale (13,213)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Cjdpey Iwf Hefx Ac Negt Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Codpen Up R Isfx Ac Njgt 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Cgjdpfx Acovbdyxj Not Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, A device for storing and feeding logs onto a sawmill table. The systematic material feed to the saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (longer option) Log length: 1000–2500 mm Log diameter: 100–400 mm Feed speed: adjusted to the incoming feeder LOG FEEDING A device for storing and feeding logs onto the table of a gang saw. The targeted material feed to the gang saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000-12000 mm Log length: 1000-2500 mm Codswavrcopfx Ac Negt Log diameter: 100-400 mm Feed speed: Adapted to the feed rate

Condition: like new (used), Year of construction: 2020, total length: 6,020 mm, Pneumatic automatic press for longitudinal wood gluing, 6 meters, for micro-joints, after complete overhaul Cedoy E I D Ijpfx Ac Njgt

Condition: used, Year of construction: 2020, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 380 V, input frequency: 50 Hz, For Sale: Format 4 Creator 950 – Vertical CNC Machining Center Due to the recent acquisition of Noordzee Interieur and the subsequent consolidation of our workshops, we currently have a duplicate CNC machine. That is why we are offering our Format 4 Creator 950 for sale. The machine needs to be cleared from our workshop in the short term. The Creator 950 is the renowned, compact vertical machining center from Format 4 (Felder Group). It is ideal for safe, efficient, and space-saving CNC drilling and milling. Simply insert the panel and the machine does the rest, without the need to set up large vacuum tables. Specifications & Details: - Brand & Model: Format 4 Creator 950 - Type: Vertical CNC Machining Center - Serial Number: 341.09.001.20 - Year of Manufacture: 2020 - Condition: Used, but in excellent and fully functional condition. Additional Information: An excellent opportunity for an interior fitter or woodworker looking for a reliable, space-saving CNC machine on short notice. Serious buyers are welcome to visit our workshop [in Middelkerke / or alternative location] for an inspection. Feel free to contact us for more information or to schedule an appointment! Asking Price: €53,620 Included per unit: - Second reference cylinder, on X-axis, positioned deeper in the machine for processing long workpieces - Machine support tables (front and rear) with air cushion system - Pick-up position * Only available on Advanced and Premium - 4-position linear tool changer, also suitable for aggregates Cgjdsyv Eu Ejpfx Ac Net * Not with tool length measurement * T001668 * Only on Advanced * On Premium free of charge instead of T001662 - UPS – Uninterruptible power supply for the machine PC, ensuring safe shutdown and data storage in case of power failure. Serial Number: 341.09.001.20 – 341.09.001.20 The Format-4 Creator 950 (Advanced, 2020) comes standard with a 9.0 kW spindle motor. Total electrical connection: 13 kW.

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Cjdpfx Acerunu Ij Nsgt

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg Csdpfx Acebnnyis Njgt in mobile version

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm Codpfx Aobb Tguec Nsgt electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Cgjdjyh Hn Hopfx Ac Njt Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: used, 2,250 x 2,250 x 6,700 mm (LxWxH) Cedpfxjy Ar Sqe Ac Njgt

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm Cgjdpfob H Infex Ac Njt curring height: 77 mm saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. Codpetqlp Rjfx Ac Nsgt The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Cgjdpfx Acstqlqae Nst

Condition: good (used), Year of construction: 1995, Slow-speed machine with moving floor, 60 cm rotor width, 18.5 kW motor, fitted with new rotor bearings. Cjdpfxey D Alko Ac Negt

Year of construction: 2025, condition: new, Resaw Horizontal - VIKI 750-80: Saw wheel diameter: 800mm Band saw width: 80mm Max. sawing width: 700mm Max. sawing height: 450mm Min. sawing height: 0,5mm Feeding speed: 0,1 - 20 Meter/minute Cgodpfx Aoyz Srhoc Nst Motor power: 22kW Feeding Motor: 1,5kW Dimensions: 2500x2700x2200mm Machine weight: 2000kg Blade tension: Hydraulic Digital control sawing thickness setting Optional Extras: - Automatic Forward and Reverse Feed - Double Pressrolls - 22kW Frequency converter in separate stand pult

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, Wet sharpening machine for Frame Saws Csdoyz Srnspfx Ac Nogt

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system Cjdpey Dfd Nsfx Ac Njgt maximum thermal output up to 850 kW suitable for dry material

Condition: good (used), Year of construction: 2006, Slow-speed machine with large rotor, 40 knives on rotor. Rotor width: 800 mm. Rotor diameter: 368 mm. Motor: 22 kW. The following parts have been renewed: rotor bearings, all bearings in the gearbox, new screen with 25 / 20 perforation, knives, V-belts. Cedpexqq A Iefx Ac Nsgt

Condition: good (used), Year of construction: 2010, functioning wood gasification plant with 40 kw electric power and 80 kw heat output Cgedsiggpbjpfx Ac Not

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller Csdpfstgqlyox Ac Negt

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm 22 kw motor with discharge auger Cjdpfxst Tvk Ae Ac Njgt

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation No PLC installed yet Partially overhauled Cedpfx Acowv Hmvj Nsgt New rotor bearings

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed) Cedpfx Asw Rpdrsc Nogt

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Codpfx Aceyalblo Negt