Used Woodcracker C 350 for sale (20,166)

Condition: used, Stick electrodes 2.5 x 350 -Type: CONARC 49 C -Price: per package Hjdpfxsd Iwmbj Agwjpa -Number: 3 packages -Weight per package: 2.6 kg

Condition: good (used), Year of construction: 2016, 2x compressor units 10 bar, Boge, screw compressor, incl. compressed air dryer, compressed air tank with sound insulation hood – used –: Price per unit ex location (net): €4,950 (net) Manufacturer: Boge Model: C 15 LDR-350 Year of manufacture: 2016 Volume flow: 1.70 m3/min Final compression pressure: 10 bar Motor speed: 3000 rpm Motor power: 11 kW Operating hours as of 16.04.2024: 25,929 / 27,938 (currently approx. 30,000 h and 31,000 h respectively) Compressed air dryer Type: DS18-2 / 575145405 Hodpfxjwxw E Uo Agwopa Serial number e.g.: 400392250004 Min/Max refrigerant pressure: 1.3 MPag / 2.2 MPag Min/Max air pressure: 0.1 MPag / 1.6 MPag 230V Compressed air receiver: Manufacturer: BWB 306 169 Capacity: 350 L Max. operating pressure: 11 bar Max. temp.: 100°C Min. temp.: -10°C Test pressure: 16.5 bar

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Hedpowk Nk Tofx Agwspa

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Hpedorthkuspfx Agwoa Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: excellent (used), Year of construction: 2004, Arburg 520 TV 1300-350 (2004) Clamping Unit: 1. Clamping Force: 1,000 kN (100 tonnes) 2. Opening Force: 115 / 300 kN 3. Opening Stroke: 300 mm 4. Maximum Distance Between Platens: 600 mm 5. Minimum Mould Installation Height: 300 mm 6. Tie Bar Spacing: 1,300 mm 7. Maximum Weight of Movable Mould Half: 500 kg Hpedpfx Agjwp E E Rowea 8. Ejector Force: 45 / 175 kN 9. Ejector Stroke: 150 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 230 cm³ Injection Pressure: 1,670 bar

Condition: used, Year of construction: 2010, functionality: fully functional, Model: ZX 6350 C SN: 1004026 Supplied with the following configuration: - SINO 3-axis digital readout, Model: SDS-6-3V - Milling head rotatable and swiveling +/- 90° - Quill feed operated via cross handle or fine feed with handwheel - Spindle speed range: 40 – 1,750 rpm - Automatic table feed on X-axis - Manual tool clamping vertical/horizontal with M12 drawbar - Manual clamping on all 3 axes - Coolant system - Chip tray - Lighting - Including accessories: (machine vice HP-40) - Technical documentation - CE-compliant version - Weight: 1,120 kg Technical Specifications: Table size: 280 x 1,000 mm Number of T-slots: 5 pcs. T-slot size: 14 mm Max. drilling capacity in ST37: Ø 30 mm Travels: X-axis: 490 mm Hpsdpoxu Uwkofx Agwoa Y-axis: 260 mm Z-axis: 460 mm Spindle head (manual): 330 mm Vertical milling head: Quill travel: 120 mm Spindle taper: ISO 30 Motor output: 1.5 kW Spindle speed range: 115 – 1,750 rpm Spindle speed steps: 8 (115 - 230 - 290 - 360 - 580 - 720 - 875 - 1,750) Horizontal spindle: Spindle taper: ISO 30 Motor output: 2.2 kW Spindle speed range: 40 - 1,300 rpm Spindle speed steps: 12 (40 - 60 - 80 - 110 - 150 - 200 - 270 - 380 - 510 - 680 - 950 - 1,300) For horizontal spindle operation, the upper beam with head can be fully rotated +/- 90° on the column. Feeds X-axis: Number of feeds: 8 steps (24 - 40 - 65 - 100 - 185 - 285 - 470 - 720 mm/min.) Min. distance spindle nose to table: 95 mm Max. distance spindle nose to table: 470 mm Dimensions (LxWxH): 1,520 x 1,330 x 2,220 mm Weight approx.: 1,120 kg

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Hjdpjxz Alvefx Agwspa Parallel movements Infrared protection curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, MOOG double pump RKP80 + AKP18- removed from running machine - removed from Arburg 420 C 1 fully functionalmanufacturer: MOOG type: RKP80, AKP18 manufacturer no.: D955Z8001 (RKP80), R9AKP18) Hodpfx Ajrr Ef Iegwopa spare part no.: 223507 type code: HZ-R18A1-RKP080KM20R2Z00DS1, A10VS0 18 DFR1/31R-PRA12KB2-S1893 Dition: gebraucht

Condition: ready for operation (used), -----Konica Minolta Bizhub C 3350i----- Hsdpfewyncmex Agwspa Tested and ready for operation! Many units available As an experienced retailer of used copiers, we have developed genuine expertise in packaging and pallet shipping to ensure our customers receive machines in perfect condition. We supply copiers sourced from and maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest selection of Konica Minolta production copiers and can arrange worldwide shipping upon request. Please feel free to contact us for further information.

Year of construction: 2000, condition: good (used), Control, control part, interface -Manufacturer: Jungheinrich, control from pedestrian stacker EJE-KmS -Type: MP 1510 C/3 -Mat no.: 50034882 -Voltage: 24V -Number: 3x control available, 1x with 2x without bracket -Price per piece Hodpfxsizc Die Agwepa -Dimensions: 330/215/H110mm / 240/190/H110mm -Weight: 5 kg/pc. / 3.9kg

Condition: new, empty load weight: 890 kg, maximum load weight: 2,610 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 1,840 mm, loading space height: 2,050 mm, loading space volume: 15.5 m³, color: silver, construction height: 2,690 mm, working width: 2,350 mm, Hydraulics, automatic reversing, hot-dip galvanizing, unbraked, tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing strips, 8 lashing eyes, * IMMEDIATELY AVAILABLE * Tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing strips, 8 lashing eyes Technical data: - Make: Vezeko - Model: TK C - Vehicle type: Box trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 405 x 184 x 205 cm - External dimensions (L x W x H): 563 x 235 x 269 cm - Loading height of floor: 59 cm - Perm. Total weight: 3,500 kg - Unladen weight: 890 kg - Payload: 2,610 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brakes: Yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Sandwich (sheet steel/foam 30 mm/sheet steel) - Roof material: GRP sandwich - Through-loading height: 199 cm - Through-loading width: 179 cm - Through-loading length: 405 cm - Number of pallet spaces: 6 - Tipping / lowering function: None - Overrun device/brake: ALKO - Frame/chassis: Aluminium substructure - Galvanized: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Plastic mudguards - Side door: No - Side flap: No - Rear doors / tailgate: Rear doors - Rear door / tailgate material: Sandwich (sheet steel/foam 30mm/sheet steel) - Tailgate load: - - Rear clearance dimension: 179 x 200 cm - Locks box body: Espagnolette lock - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing rails: Yes, slotted-hole rail - Lashing eyes: 8 - Interior light: Optional, can be retrofitted - Rear lighting: Incandescent bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Reinforced stable bolted V-drawbar - Very stable aluminium frame - Frame very torsion-resistant due to its stable construction - Floor panel made of Finnish multiplex - Many cross members therefore high point load - Body made of very solid sheet steel sandwich, insulated, 30 mm thick - Cover layers made of hot-dip galvanized and additionally powder-coated sheet steel - Roof made of GRP sandwich 25 mm - 2-leaf. Rear door lockable with VA espagnolette lock - 2x manoeuvring handles at the front - Doors with special sealing profiles, made of hard/soft plastic - Rear frame on hot-dip galvanized steel, solid welded - 8 lashing brackets recessed in the floor (750DaN/kg) - Slot-hole lashing strip mounted on both sides, h=90cm - 100 mm impact protection all round the interior - maintenance-free rubber spring axles from ALKO - automatic reversing - ALKO overrun device and parking brake - plastic mudguards - 13-pin plug - reversing lights - large parking brake - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - anti-theft device - rear supports - side door - additional lashing eyes - additional slot-and-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty Hjdpou Skyksfx Agwepa

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production Hpodpfxetuncco Agwja *

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Hsdpfx Asxbtl Tsgwepa Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Hedpfow I Uv Uex Agwopa Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: new, machine/vehicle number: wtc350, Westtech Woodcracker C350 - available immediately Equipment: - Collecting grapple - Tiltator can be rotated continuously - Autospeed function - Cutting diameter for soft wood: 400 mm - Cutting diameter for hard wood: 350 mm - Grapple opening width: 1,430 mm - Scissor opening: 700 mm - Hydraulic flow: 70 - 150 l/min - Hydraulic flow for additional functions e.g. turning function: 45 - 60 l/min Hpodpfeiadzijx Agwsa Adapter plates on request. We are an official Westtech Woodcracker sales and service partner, Magni telescopic loader sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. Hpodpoilqvrofx Agwea the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: new, empty load weight: 830 kg, maximum load weight: 2,670 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,550 mm, loading space width: 1,840 mm, loading space height: 2,050 mm, loading space volume: 13.6 m³, color: silver, construction height: 2,670 mm, working width: 2,370 mm, Hydraulics, automatic reversing, hot-dip galvanizing, unbraked, tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing rails, 6 lashing eyes, * IMMEDIATELY AVAILABLE * Tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing rails, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3500 kg - Unladen weight: 830 kg - Payload: 2,670 kg - Interior dimensions: 355 x 184 x 205 cm (L x W x H) - Overall exterior dimensions: 521 x 237 x 267 cm (L x W x H) - Loading sill height: 59 cm - Tires: 185R14C steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, Finnish multiplex board - Walls: 30mm sheet steel sandwich - Roof material: 25mm GRP sandwich - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (750kg/daN) - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 179 x 200 cm - Interior light: at an extra charge - Supports: at an extra charge - Overrun device & brakes: yes Overrun device & brake: yes, - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Reinforced stable bolted V-drawbar - very stable aluminium frame - frame very torsion-resistant due to its stable construction - floor panel made of Finnish multiplex - many cross members thus high point load - body made of very solid sheet steel sandwich, insulated, 30mm thick - cover layers made of hot-dip galvanized and additionally powder-coated sheet steel - roof made of GRP sandwich 25mm - 2-leaf. Rear door lockable with VA espagnolette lock - 2x manoeuvring handles at the front - Doors with special sealing profiles, made of hard/soft plastic - Rear frame on hot-dip galvanized steel, solid welded - 6 lashing brackets recessed in the floor (750DaN/kg) - Slot-hole lashing strip mounted on both sides, h=90cm - 100 mm impact protection all round the interior - maintenance-free rubber spring axles from ALKO - automatic reversing - ALKO overrun device and parking brake - plastic mudguards - 13-pin plug - reversing lights - large parking brake - large rear lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the center - registration certificateAutomatic jockey wheel in the middle - Registration papers: COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - additional slot-and-hole rails for lashing straps & locking bars - bar strip with rubber coating for lashing straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 4 Hpsdpfx Agju Htnaswja

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power ! Hsdpohy Nnbofx Agwspa

Condition: used, Year of construction: 2022, Westtech Woodcracker W1350 splitting tongs / Year of manufacture: 2022 / DEMO device / incl. rotator / immediately available / top condition! Price: 22,000.00 ¤ net / 26,180.00 ¤ gross - Tong opening: 1,370 mm - Splitting force at 240 bar: 34 t - Own weight (basic - fully equipped): 990 kg - Recommended liter output: 80 - 150 l/min - Recommended operating pressure: 220 -270 bar - Service weight of carrier vehicle: 20 t Equipment: - Rotator RT25 Many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We are an official Westtech Woodcracker sales and service partner, Seppi M. sales and service partner and also represent the brands DMS sales and service partner, Magni telescopic loader sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and with 800 used vehicles one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Hpedpfxerv I S Ho Agwea Subject to errors and prior sale! Internal number: 422203

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with integrated Zander K-MT 2 steam humidification unit. This unit is suitable for precise temperature and humidity testing of components, assemblies, and devices. Ideal for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: - Temperature range: -40°C to +180°C - Temporal temperature fluctuation in the center of the usable space: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Rate of temperature change: Hpodpfxsx Hxkzj Agwsa * Heating: 4 K/min * Cooling: 3 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % RH - Temporal temperature fluctuation in the center of the usable space: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temporal humidity fluctuation in the center of the usable space: ±1 to ±3 % RH - Heat compensation: * In the range from +25°C to +95°C * At relative humidity up to 90%: 500 W Specifications for Humidification System: - Reservoir capacity: 20 L - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 µS/cm3 - Water consumption at constant +40°C, 92 % RH: 21/24 h - Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg For your peace of mind as a buyer, please note the following information: The following actions are performed on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) Should you have further questions, we are happy to answer them by phone.

Condition: good (used), The scope of delivery includes: 01x C-profile, used profile dim.: C: 50 x 50 x 15 mm Material color: sendzimir galvanized total length: approx. 2.775 mm material thickness: approx. 2,00 mm weight / pcs.: 7,080 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us. Hjdpfjnfvbpsx Agwspa

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm material color: sendzimir galvanized total length: approx. 1.865 mm center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Hpsdpfx Ajnbd Ursgwja Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Type of fastening: laterally to the shelf upright Hedpfoi Euzdex Agwepa surface: sendz. galvanized total length: 450 mm for shelf distance: approx. 350 mm profile dim.: U 62 x 30 mm Weight: 0,84 kg | pcs.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized total length: approx. 1.015 mm Hpjdpfenbfapex Agwja center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery: 01x C-profile, II. choice Manufacturer: SSI Schäfer Material color: sendzimir galvanized Hedpfxsh T Avxe Agwopa total length: approx. 1.510mm profile dim.: C 100x60x10 mm material thickness: approx. 3,0 mm Remark: - Since this is a used product may be damaged, holes, welds or other rust approaches may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)