Okuma LU15 M-2SC 1000
Okuma LU15 M-2SC 1000

Name: Okuma LU15 M-2SC 1000
Brand: Okuma
Availability: InStock

Year of construction

1998

Condition

Used

Location

Germany

Okuma LU15 M-2SC 1000 Okuma LU15 M-2SC 1000

Show map

Machine data

Machine type:: Okuma LU15 M-2SC 1000

Manufacturer:: Okuma

Model:: LU15 M-2SC 1000

Year of construction:: 1998

Condition:: ready for operation (used)

Price & Location

Location:: , Germany

Call

Technical details

Travel distance X-axis:: 260 mm

Travel distance Z-axis:: 1,020 mm

Controller manufacturer:: OKUMA

Number of axes:: 4

Details about the offer

Listing ID:: A21866743

Reference number:: DE-TUR-OKU-1998-00005

Update:: 07.05.2026

Description

This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details.

• Longitudinal Travel (X): 1020 / 995 mm
• Cross Travel (Z): 260 / 140 mm
Dujdpoy Nmi Dofx Apwot
• Turning Range: 340 mm
• Swing Diameter over Bed Cover: 530 mm
• Swing Diameter over Cross Slide: 380 mm
• Spindle Nose: ASA-A2 / DIN 55026 Gr. 6
• Spindle Bore: 62 mm
• Spindle Diameter in Front Bearing: 100 mm
• Chuck Diameter: 200 mm
• Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED
• Power (Main Drive): 22 kW
• Max Torque: 412 Nm
• Speed Range: 45 - 4,500 rpm
• Speed Levels (Electrical): 2
• Feed Drive: AC servo motors, digitally regulated
• Feed Range X/Z: 0 - 1,000 mm/U
• Rapid Traverse X/Z: 15 / 20 m/min
• Power X, Z: 2.4/1.5 kW and 4/4 kW
• Feed Force X, Z: 11/3.7 kN and 7/6.7 kN
• Turrets: 2 tool turrets
• Live tooling: Yes (C-axis and driven units)
• Tapping: Synchronous tapping
• Spindle interpolation: Automatic main spindle interpolation
• Tool monitoring: Wear and breakage monitoring
• Tool measurement: Integrated tool setter / measuring device
• Tailstock: Programmable, towable with bed slide, automatic clamping
• Tailstock quill: Controllable via M-command
• Draw tube bore: 55 mm (partial hollow clamping cylinder)
• Interface: DNC Interface RS-232C
• Cooling system: Reinforced pump (8 bar at 30 l/min)
• Programming: ONE TOUCH Dialog-NC (automatic work plan generation)

Additional equipment

• Chip conveyor (1,200 mm discharge height)

Technical Specification
Counter Spindle No
Driven Tools Yes

Seller

Registered since: 2017

1,387 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

CNC Turning- and Milling Center MAZAK Super Quick Turn 100 MS

Germany

856 km

CNC Turning- and Milling Center
MAZAKSuper Quick Turn 100 MS

Call

Condition: excellent (used), Year of construction: 2001, x-travel 185 mm z-travel 360 mm b-travel 460 mm control Mazatrol 640 T Maximum swing diameter 550 mm Maximum turning diameter 280 mm workpiece weight max. 200 kg bar capacity 51 mm main spindle speed 35-6000 U/min milling head speed 25-4500 U/min rapid power traverse in X-and Z direction 30/33 m/min Rapid traverse B axis 30 m/min tool turret 12 Plätze weight of the machine ca. 4100 kg Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 80–535 mm Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Djdpfx Apoyukf Sjweut Counter spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M12 End mills: 16 mm Milling spindle speed: 25–4,500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Chip conveyor Documentation

See details

Listing

CNC turning and milling center EMCO Hyperturn 665 MC Plus

Jakling

1,590 km

CNC turning and milling center
EMCOHyperturn 665 MC Plus

Call

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis Dujdpfx Apjxzq Ncjwjt C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

See details

Listing

Willroth

908 km

CNC lathe
OkumaLT 200-M

Call

Listing

Root

1,232 km

Cnc lathe
HYUNDAIHIT 250 M

Call

Listing

Germany

1,006 km

HAAS VF-2SS
HAASVF-2SS

Call

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,327 h, travel distance X-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details. • IKZ • Probe • Tool measuring • Axis configuration: 3 axes (X/Y/Z) • Frequency: 50 / 60 Hz • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Arc flash rating: Djdpfx Aoyux Saspweut • 208-240 VAC models: HRC-1 • 360-480 VAC models: HRC-2 • Feed cutting time: 5327 h

See details

Listing

CNC Turning- and Milling Center MAZAK Integrex 100-IV

Germany

856 km

CNC Turning- and Milling Center
MAZAKIntegrex 100-IV

Call

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Djdpfjyt R Idex Apwout Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

See details

Listing

Germany

1,137 km

Center Lathe
OKUMAL 9

Call

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm Duedpfx Aewa Nwfspwet spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

See details

Listing

Einöden

1,455 km

Milling machine
EmcoVMC 300

Call

Listing

CNC Turning- and Milling Center MAZAK SQT 250 MS

Oelde

863 km

CNC Turning- and Milling Center
MAZAKSQT 250 MS

Call

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° Duedjxmaguepfx Apwot rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis

See details

Listing

CNC turning and milling center MAZAK SQT 200 MS

Dieburg

1,027 km

CNC turning and milling center
MAZAKSQT 200 MS

Call

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Dujdpfxsx Hgl Hs Apwet Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

See details

Advertise here