Turn-Mill Centre

Okuma Multus B300 II

Condition: used, Year of construction: 2003, machine/vehicle number: 247078, Max. turning diameter: 630 mm Max. machinable diameter: 630 mm Max. distance between centers: 900 mm Travel: X-axis: 580 mm (+480 / –20 mm) Z-axis: 935 mm Y-axis: 160 mm (+80 / –80 mm) C-axis: 360° (in 0.001° increments) B-axis: 225° (–30° / +195°; in 0.001° increments) Spindle speed: 50 – 5,000 rpm Tailstock type: NC-controlled, MT5 Spindle nose: A2-8 Spindle bore: Ø 80 mm Spindle bearing diameter: Ø 120 mm Turret type: H1-ATC Tool holder: HSK-A63 Number of stations: 1 Tool magazine capacity: 40 tools Tool size: 25 × 25 mm Shank diameter: Ø 32 mm Max. tool diameter: Ø 90 mm Max. tool length: 300 mm Max. tool weight: 8 kg Driven tool power (5 min / continuous): VAC 11 / 7.5 kW Milling spindle speed: 50 – 6,000 rpm Milling spindle torque (5 min / continuous): 65.7 / 44.8 Nm Feed rate: 0.001 – 1,000 mm/rev Rapid traverse: X-axis: 40 m/min Z-axis: 40 m/min Y-axis: 26 m/min C-axis: 200 rpm B-axis: 30 rpm Spindle motor power (30 min / continuous): OKUMA PREX 15 / 11 kW Spindle motor torque (10 / 20 min / continuous): 412 / 281 Nm Feed axis motor power: Z-axis: OKUMA BL 2.8 kW X-axis: OKUMA BL 3.5 kW Y-axis: OKUMA BL 2.9 kW W-axis (tailstock): OKUMA BL 2.9 kW Coolant pressure through milling spindle: 20 bar Coolant pump capacity: 0.8 kW Machine dimensions (L × W × H): 4,035 × 2,257 × 2,587 mm Machine weight: 10,000 kg Nwjdpfxjxtn Ere Ad Hop Control system: OKUMA OSP-P300SA Display: 15" touchscreen (OSP Suite)

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Nodpfxown Dbns Ad Hewp Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: ready for operation (used), Year of construction: 2016, Control Unit Nwsdpfx Asxg Umpsd Hjp Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2023, operating hours: 213 h, functionality: fully functional, OSP-P300SA control system with LCD screen Max. turning diameter 630 mm Max. turning length 900 mm X travel 580 mm (+480 / -20 mm) Y travel 160 mm (+80 / -80 mm) Z travel 935 mm Spindle end A2-8 Njdpfx Aswrr Nhed Hjwp Spindle bore D80 mm Main spindle speed 50 - 5000 rpm C axis 360° (0.001 degrees) B axis 225° (-30° / +195°; 0.001° increment) Power of driven tools (5 min/cont.) VAC 11/7.5 kW Milling spindle speed 50-6,000 rpm Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm HAS-A63 chuck Number of tools: 40 Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X) 40 m/min Rapid traverse (Z) 40 m/min Rapid traverse (Y) 26 m/min Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Features, accessories - Internal coolant supply: 20 bar - Kitagawa B-212A8 12" chuck - NC tailstock - B-axis indexing in 0.001 degrees - Coolant supply through the milling spindle - Dual foot pedal - Y-axis travel: 160 mm (+80 / -80 mm) - Hydraulic Device - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS - Collision Avoidance System - *10 dB Coordinate Measurement (1 set) - Control Software: * Coordinate Transformation (1 set) * Profile Generation (1 set) * Coordinate Calculation (1 set) * Coordinate Change, Rotation, and Copy (1 set) * Realistic 3D Simulation (1 set) * Cycle Time Monitoring (1 set) * Load Monitoring (Main Spindle, Slide) (1 set) * Program Run Monitoring (1 set) * 2-Color Signal Lamps (1 set) Chip conveyor Coolant system Machine feet Documentation The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Nedsurfz Ijpfx Ad Hjwp Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073  

Condition: ready for operation (used), Year of construction: 2023, General Data Njdswmg U Ispfx Ad Hjwp Measurements width 2257 Measurements depth 4035 Measurements height 2538 Machine weight 10000 Control Unit Brand OKUMA Model OKUMA OSP-P300SA Movement X-Axis Movement 580 mm (+480/-20 mm) Y-Axis Movement 160 mm (+80/-80 mm) Z-Axis Movement 935 mm B-Axis Movement 225° (-30°/+195°; 0.001° increments)225° (-30°/+195°; 0.001° increments) C-Axis Movement 360° (0.001° increments) Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment Thermal Stability Concept (TAS-S & TAS-C) Full enclosure and LED workspace lighting Hydraulic power unit for basic machine operations 3D Simulation and collision avoidance (CAS) This 5-axis Okuma Multus B300 II turn-mill centre was manufactured in 2023, featuring a max turning diameter of 630 mm and a machining length of 900 mm. It includes a collision avoidance system, thermal stability, and an easy-to-use OSP-P300SA controller with a 15” touch screen. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Nodjv I U Iyjpfx Ad Hswp

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 500 mm, warranty duration: 12 months, total height: 3,000 mm, type of input current: three-phase, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available. Please feel free to contact us. Zeiss | UMC850 with Renishaw PH10 and SP25 Scanning System, including Renishaw Modus Measurement Software Retrofit coordinate measuring machine with the latest Renishaw technology Year of manufacture: approx. 1990 / Upgraded in 2022 – Light grey wrap Measuring range XYZ: 800 x 1800 x 500 mm Measuring uncertainty MPE (E0): 2.6 + L/300 µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes - Renishaw PH10 rotary indexing head with SP25-2 scanning system, incl. FCR25-L6 (6-port) probe changer - Latest version of Modus measurement software with STEP CAD import incl. 1 year software maintenance - PC system Windows 10 with two 27'' TFT monitors (NEW), height-adjustable desk included - Control cabinet with up-to-date safety technology - Base plate We are happy to tailor the equipment to your requirements. Njdovxhzujpfx Ad Howp Optional service packages available: Delivery to the curb | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and configurations available upon request

Condition: ready for operation (used), Year of construction: 2017, turning length: 3,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 1,500 rpm, chuck outer diameter: 375 mm, Multitasking Machine OKUMA MULTUS B750 C3000 Nodpfx Adowi Ezro Hewp YEAR2017 OSP-P300SA 15" chuck Max Machining dia:1050mm Length:3000mm

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Nwjdpfx Adjxbqnxs Hsp Parts shown by hand not come.