Four-axis vertical machining center

Quaser MV 184 C

Condition: used, Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, total height: 2,770 mm, total length: 3,300 mm, total width: 2,687 mm, The Micron VCE 1000 Pro is a powerful and precise CNC machining center designed for demanding milling tasks. With travel distances of 1020 x 560 x 600 mm, it enables flexible machining of medium-sized workpieces. The machine is equipped with a Heidenhain iTNC 530 control, an ISO 40 tool taper, and a spindle speed of up to 10,000 rpm, making it ideal for high-precision, high-speed machining. Pgedpfoxyig Rex Aa Djk The robust table with a 1000 x 560 mm T-slot area supports workpieces up to 1,350 kg. Fitted with a chip conveyor, coolant pump, and a 18.5 kW motor, the VCE 1000 Pro offers a reliable combination of power and precision.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase Podpswp Rqfsfx Aa Dogk • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Working area Control: Fanuc 31i-B5 Travel X: 700 mm Travel Y: 400 mm Travel Z: 400 mm Clamping surface: 850 x 410 mm Max. table load: 400 kg Rapid traverse X/Y/Z: 54 m/min Positioning accuracy: 0.006 mm Repeatability: 0.004 mm Spindle Technology: Direct drive Max. speed: 24,000 rpm Max. power: 26 kW Max. torque: 35 Nm Tool holder: BBT 30 Tool changer Podpjydi Hysfx Aa Djgk Tool magazine: 21 positions Tool change time: 1.3 s Equipment Coolant supply: ICS 20 bar Chip removal: chip conveyor

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, Podpfx Aox Awzbea Degk 4th axis will come without parts shown by hand.

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Psdpou Rqynofx Aa Degk Complete documentation

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Pedpfx Aaoxwdygj Dogk Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe Pgodpfxsuhbv So Aa Dsk - Workpiece probe : Renishaw OMP60

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW Pgjdpfob N Eh Hsx Aa Dsk space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain Pjdpfxeyztyao Aa Dsgk turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm Podpfx Aewcdpnja Dogk We have several pieces