RÖDERS RHP 500

RÖDERS RHP 500

Condition: excellent (used), Year of construction: 2007, 1.) Work area: 500x552x300 mm Guedpfx Ajyaa Umsf Toa 2.) Max. workpiece weight: 400 kg 3.) Milling spindle: 42,000 rpm 3.) Tool changer: 42 positions 4.) Guide system: Hydrostatic on all axes 5.) Drive: Linear motors 6.) Control: Röders RMS6 7.) Machine weight: approx. 10,000 kg 8.) Required space: 3015x2510x2750 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package Godpfow Tt R Iex Af Toua - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] Gusdpfeuha Umex Af Tsa - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

Condition: used, Year of construction: 2015, x-travel 635 mm y-travel 510 mm Gujdpfxswm Rtbo Af Toa z-travel 460 mm Control DMG

Year of construction: 1995, condition: ready for operation (used), A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple stroke device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, spring outer diameter: 2mm-30mm, production capacity: 400 springs/min, max. material strength: 2400N/mm², spring outer diameter range: 2mm-30mm, wire feed length: 30mm/470mm/770mm/1200mm. Machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm, weight: approx. 1000kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible. Gjdpfx Afev Ip Sme Tjua

Year of construction: 1980, condition: used, Compressed air dryer, refrigeration dryer -Max. Pressure: 16 bar -Operating voltage: 380 V Gusdpfx Asckgivof Tja -Dimensions: 1050/950/H1770 mm -Weight: 556 kg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 576409, OPS INGERSOLL GANTRY EAGLE 1200 Year of construction 2017 Machine No. 576409 Standard Specifications 1.01 Eagle Powertec PC/NC Godjwu Hb Rspfx Af Tjua * Multiprog Powertec technology programming on PC/NC and as CD (external programming place) * Powertec Easy Burn high-speed programming * Powertec Handheld - multi-functional hand control device * Manual eroding with Powertec Handheld * Interfaces Ethernet and USB 　 * Multi-control light (remote maintenance via Internet), free of charge during the guarantee period 1.02 Eagle Powertec fine finish generator PT60 1.03 Eagle Power Jump with 18m/min interval speed in the Z-axis 1.04 Pressure flushing programmable, suction connection manually 1.05 Filter unit, 32m² paper filter 1.06 Compressor cooler 1.07 CO2 fire-extinguishing system 1.08 Color: Structural lacquer in cobalt-blue (RAL5013), grey (ral 7045), yellow (RAL1021) 1.09 Machine shoes Feature Specification XYZ travels 1 000 × 1 500 × 700 mm Tank size 1 270 × 1 770 × 680 mm Table size 1140 ×1640mm Table load capacity 7 500 kg Max head load 300 kg Rapid traverse 5 000 mm/min High-speed Z jump 18 000 mm/min (18 m/min) CNC Control Dual 32-bit PC, touchscreen, USB/Ethernet Generator (PT60) Adaptive current, 60 A Dielectric volume & filter 2 400 L, 32 m² filter Machine size & weight 2 950 × 3 950 × 3 440 mm, ~12 000 kg

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox Gjdpfoyh Ri Iox Af Teua - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: new, Model Name Gedpok Au Drjfx Af Tsua B3 Entgrat-/Anfasmaschine

Condition: excellent (used), Year of construction: 2016, operating hours: 12,229 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain iTNC530i with integrated pallet changer, 36 pallet positions Travel range X/Y/Z: 730 x 250 x 400 mm B-axis travel range: +/- 105 degrees C-axis travel range: infinite Work area X/Y/Z: 585 x 250 x 400 mm Max. workpiece weight: 60 kg Distance: machine table to spindle nose: 450 mm Machine dimensions (W x D x H): 2845 x 2370 x 3000 mm Machine weight: 8000 kg Equipment/Features: Cooling unit Rotary tilt table 160 (B/C-axis) Workpiece measurement: Renishaw OMP400 Tool measurement: BLUM Dynaschine collision controller (DCM) Table chuck: EROWA PowerChuck P 150 Pallet changer 36-fold EROWA ITS50...148 Tool changer: 90 positions for HSK40 MHT media distributor with 3 dosing settings Control system: Heidenhain iTNC530 HSCI FS Milling spindle: Steptec HVC140 Spindle power S2/S6 40%: 10 kW / 13 kW Spindle speed: 42,000 rpm HSK40 Z-axis compensation Exo-call fault indicator Exo-net remote diagnostics Network connection Portable control panel HSCI FS Godpfx Afew U D Igj Toua Pressure amplifier for chuck Transport, training, and commissioning on request