Cross-cut line

REINHARDT SLIM LINE SL 110

Condition: like new (used), Through feed double end trimmer saws. Bedpfoif N Sxox Amislh 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total Bjdpfsvry T Nex Amijlh 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC. Blodpsy Hb Upefx Amioh

Condition: used, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken and others. Turning and milling tools with VDI 40 interface. Only for sale per pallet. Pallet 1: EUR 3,220 total 4x driven tool VDI 40 at EUR 580/each 10x tool holder VDI 40 at EUR 90/each Pallet 2: EUR 3,130 total 4x driven tool VDI 40 at EUR 580/each (1x new) Bodpfx Aevpvmtjmielh 9x tool holder VDI 40 at EUR 90/each Pallet 3 is sold Pallet 4 is sold

Condition: used, Year of construction: 2021, operating hours: 2,783 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tyres (front): 215/75 R16, Tyres (rear): 215/75 R16, Operating hours: 2783, Battery: Li-ion 63 kWh, Width: 1300 mm, First registration: 02.11.2021, Charger: Integrated 22 kW, self-propelled Standard Equipment Fully Electric CityCat V20e: Cabin: Comfortable suspended, sound-insulated aluminium cabin. Front windscreen made of heat-insulating, curved, anti-reflective safety glass. Two sliding windows on each door. Multi-level heating fan, sun visors, windscreen wiper with washer system. Individually adjustable, suspended driver's seat with headrest and 3-point seatbelt. Steering column adjustable for angle and height. Chassis: Two-part ladder frame chassis with "C"-profile construction. Independent wheel suspension with shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions as well as broom drive at the front and sides. Brakes: Hydraulic servo dual-circuit braking system with disc brakes on front and rear axle. Parking brake (spring-loaded brake) acting on the front axle. Drive: Working speed 0-15 km/h, Driving speed 0-50 km/h*, climbing ability up to 30%. Electric drive output 88 kW. Electric blower 8.5 kW. Electro-hydraulic unit 12 kW. Blsdpfxeiwwghe Amioh HV Battery: Battery type Li-ion, battery capacity 63 kWh, nominal voltage 335 Volt, operating time up to 10 hours. Charging system: Integrated charger 22 kW, charging plug Type 2, charging time 2 to 3 hours. Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control. Hydraulics: Hydraulic unit with low-noise gear pumps for blower, steering, auxiliary functions, and broom drive at the front and sides. Electrical system voltage: 12 V electrics, battery 95 Ah. Hydraulic servo dual-circuit braking system with disc brakes on front and rear axle, spring-loaded brake (parking brake) and handbrake valve acting on front axle. Tyres: 4 wheels with 215/75 R16C M+S. Dimensions: Length 4200 mm, Width 1300 mm, Height 1999 mm, Wheelbase 1900 mm, Track width 1090 mm, Sweeping width 2100 mm, Sweeping width with 3rd broom 2700 mm Optional equipment: - Lithium-ion NMC battery, 63 kWh, 335 V - RAL 9016 white - Suction hose, 4 m long (incl. suction tube), diameter 120 mm, with Storz couplings, with hydraulic shutoff flap - Third front disc broom - Broom diameter 800 mm, with front arm, swivels left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment for both side brushes - Lateral adjustment of both side brushes, stepless hydraulic adjustment of each broom individually - Easy Clean quick cleaning system for cleaning the KGB sidewalls, recuperation and leaf grate - Hydraulic side brush pressure regulation for both side brushes with individual broom lifting, combined - DAB+ radio with CD MP3, Bluetooth, microphone - Heated exterior mirrors - Broom system...

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm Bledpfxou Idfre Amioh control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Bsdpjt Hxa Hsfx Amislh Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, cutting height (max.): 1,200 mm, cutting width (max.): 1,200 mm, cutting length (max.): 6,000 mm, fixed bed, mobile head; chain with diagonal vertical movement; automatic cutting Blodpfx Aeyzrcmjmieh

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Serial Number: 142031. Date: 1999. Bsdpfx Amjtz A Dfeijlh Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Hydrafeed barfeeder NOT included. This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, Year of construction: 1993, Technical details: saw blade diameter: 250 mm saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Bledpfeu Nifyex Amioh Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, *