Eccentric press

Richter 315t

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 Gsdpou N A Uuofx Aanjbw throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, functionality: fully functional, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Gbedpfx Aaov T Dapsnjw Ram adjustment 80 mm Stroke rate 50 /min.

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available Gjdpfxjx H T H Rj Aanobw - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Gbjdpfjw Azu Iex Aanow

Condition: new, width of the strips 100 mm band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm Gbsdpfx Aajupxm Eonow total power requirement 1,5 kW weight of the machine ca. 0,04 t dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: Gsdpfjgta Rcex Aanebw SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Godpotq Eqxefx Aanjbw

Condition: used, Year of construction: 2006, CNC portal cutting machine Manufacturer: Bach Type: ACK-2D Gbedpfxew El Udj Aanew Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches 121126ä

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,867 h, load capacity: 1,800 kg, lifting height: 3,480 mm, fuel type: electric, mast type: simplex, construction height: 2,310 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 575Ah Battery manufacturer: Well-tested and refurbished battery Battery type: PzS Battery year of manufacture: 2019 Description: Refurbished, serviced and inspected according to FEM 4.004 (UVV) // Completely repaired, serviced and checked Side shifter, Fork adjustment available at an extra cost 3rd valve, 4th valve, safety light Gbedpfou D Rvcex Aanjw