Eccentric press

Smeral Trnava LEN-40 C

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Cylindrical grinding machine – external / Manufacturer: WMW / Type: SA 6U x 3000 / YOM/Completely overhauled: 2013 (machine overhauler/carried out by SerWeMa/Germany) Range of parts: Straightening rollers, grinding spindles, general shaft machining. Special feature: Machining with up to 6 steady rests. The machine can be inspected under power by appointment. TECHNICAL DATA: Working range: Ledpfx Ajxymdaehzjrg - Centre height: 260 mm - Max. swing diameter: 515 mm - Max. grinding length: 3.000 mm - Max. grinding diameter: 515 mm - Max. workpiece weight: 500 kg Workpiece headstock: - Speed continuously variable: 12.5 - 355 rpm - Centring tip: Morse K5 Tailstock: - Max. quill stroke: 40 mm - Centring tip: Morse K5 Grinding headstock: - Grinding wheel: * Max. outer diameter: 630 mm * Width max.: 125 mm EQUIPMENT: - Extraction system - Documentation - CE marking No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Ledpfew Rn R Rsx Ahzjrg Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 - Coolant device

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm Ledpfxevz Ayds Ahzorg 6100 x 1,000 mm table 4500 x 1,000 x 1,000 mm stroke 19-ton weight

Condition: excellent (used), Fixed bed milling machine Zayer model KF 3000 with CNC heindenhain 355, prepared with external computer for cad cam, table 3000mm x 1000mm, travels, longitudinal 2700mm, transverse 1250, vertical 1000mm, rapid advances 15000mm/min, huron iso 50, spindle speed 3 ranges 3000 rpm variable, recently repaired huron head, with change of gear pair and all the bearings of the same head.power 30kw, weight admitted on table 10000kg, machine in good condition, weight of the machine 25tns. Lsdevdv Tcspfx Ahzerg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Lrodpfxstqtk As Ahzeg Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length Ledskvnumspfx Ahzorg 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm Lsdpfx Ahovuullezerg no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer with pneumatic drive can only be offered without putting into operation in our warehouse video at seller's site before dismantling available

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. Lrodpfxjr Ui R Ne Ahzog DIAMETER OF LANTERN SHAFT : 83 mm. OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION

Condition: excellent (used), Grinding length 1000 mm grinding diameter fi 350 mm Lsdpfx Ahjk Abxxezjrg In very good condition.

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Lrodjikqz Sopfx Ahzjg Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg