Vertical machining center

somab DIAM800

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Bedpfx Aleu Uic Ts Ielg Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm control FANUC Serie 18i-TB turning spindle Durchlass 108 mm Bledpfjucgylsx Al Ieg 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm diameter of quill 110 mm taper MK 4 number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

Condition: good (used), Year of construction: 2011, Müga TT - 42, Year of manufacture 2011, Mitsubishi M 700 control, Bar machining up to 42 mm, Sub-spindle, 2 turrets, B-axis: 0.001°, C-axis: 0.001°, Y-axis: 0.001°, Swivel head B-axis: +50°/-140°, Driven tools, Workpiece catcher, Workpiece conveyor belt, Chip conveyor, 2 collet chucks, Short bar loader Müga DH 65 L/1.5 m, Intelligent manual pulse generator (MPG), Reduction tubes. Main spindle X Y Z-axis 20 stations, 6 driven; Sub-spindle Y-axis 22 stations, 6 driven. Bar capacity: 42 mm Spindle power: 7.5 kW Spindle speed: 4,000 rpm Blsdpfx Alexpulkj Ijg Equipment: - 2 turrets - Driven tools - Workpiece catcher - Workpiece conveyor belt - Chip conveyor - Intelligent MPG Reduction tubes Accessories

Condition: excellent (used), Year of construction: 2005, X 450 Y 300 Z 300mm, BT 30, 10.000Rpm, cooling trough spindle, paper filter, Mitsubishi Bljdpfxetiyl Es Al Ijg

Year of construction: 2013, condition: excellent (used), 1 x oil cooling unit Deryun DJ 2.5 RSA-400V-CE year of manufacture: 2013 Bljdpfxjkhigfs Al Isg in very good condition. The oil cooler can be visited.

Year of construction: 2008, condition: excellent (used), 1 x oil cooling unit Bjdpfskhim Ejx Al Iolg Deryun DJ 3 RSA02-CE-400V year of manufacture: 2008 in very good condition. The oil cooler can be inspected.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 280002, turning length: 510 mm, total height: 2,250 mm, total length: 2,900 mm, total width: 1,915 mm, overall weight: 7,500 kg, bar passage: 65 mm, 12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control Bodjvbbl Sepfx Al Ielg

Condition: used, TECHNICAL DETAILS screen Ø : 300 [mm] EQUIPMENT - 3 objectives (10x, 20x, 50x) - 2 axis display Blsdpeuhb Nlofx Al Iog

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler – Inline Oil Cooler D20V D30V 2 inline oil coolers – Cooling system for machine cooling – Available individually. Two standalone inline oil coolers / flow-through coolers for cooling oil / hydraulic oil, manufactured by Wöhr Kältetechnik, designed for cooling/temperature control of the coolant circuit or hydraulic system of machine tools. Each unit features an integrated circulation pump and flow monitor. The housing contains an integrated control cabinet with connection cable, LAE temperature controller MTR11, and a volt-free fault contact. The built-in circulation pump is a gear pump. The cooling units are suitable for clean oil. A programming manual for the temperature controller is included. Both coolers are in used condition. Cooling Unit Wöhr Inline Oil Cooler Type D 20 V, year 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, Walter Procon plug connection (cooler was installed on the hydraulic system of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Inline Oil Cooler D 30 V Wöhr Inline Oil Cooler Type D 30 V, year 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE power plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers / oil cooling systems are in used and well-maintained condition. Price per unit: €1,950. All technical data subject to typographical or factual error. We only sell to countries within the European Union. Bjdpfx Aleg U H E Sj Iolg

Condition: excellent (used), Year of construction: 2004, VERTICAL MACHINING CENTER FAMUP TRAVELS 1600x650x650 SPINDLE ISO 40 12,000 RPM RANDOM TOOL CHANGE 30 POSITIONS Blodsvq Rznjpfx Al Ijg HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR SPINDLE COOLING FRIDGE CNC FANUC 18iMB REMOTE HANDWHEEL MACHINE WEIGHT 12,000 KG