Lathe VDF 21RO x 1000mm

VDF HEIDENREICH & HARBECK 21RO x 1000mm

Condition: excellent (used), Offer consisting of: Polar 115E guillotine (1995), RA-4 jogging table (2004), unloader/. POLAR guillotine 115 E serial no. 6531415, year of manufacture 1995 – display, cutting table with air nozzles, 1 knife. Jogging table RA-4 serial no. 7482431, year of manufacture 2004 – KNORR stacker ABS-145-3-L /GL serial no. 6960012, year of manufacture 1999. Iodoxax D Sopfx Adisa

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) Isdpfxsv A Sqhs Adija *

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Iedpfx Adjcir Aneisa Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 Iodpsg Rxh Ijfx Adioa short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable

Condition: used, Saimp KS Iron Lathe. Max piece length 1000mm Isdpfev Sth Hsx Adiea

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm Ioded Hl Stepfx Adioa

Condition: ready for operation (used), Year of construction: 1982, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 3,500 kg, Mitutoyo 3-axis DRO table 2000 x 700 mm travels 1650 x 1000 x 1000 mm automatic lubrication spindle taper SA 40, maximum spindle speed 2066 rpm weight 7500 kg Ijdpfx Adowxyzfjija

Condition: good (used), Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Meuser, lead screw lathe type M-IV-S -Machine bed: hardened -Turning length: 3800 mm -Turning Ø over bed: 720 mm -Turning Ø over support: 440 mm -Spindle bore: Ø 95 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 400 mm Iedpswrfkfsfx Adija -Tailstock mount: MK6 -Drive: 18 kW -Accessories: 1x bezel, Multifix tool holder, tools see photos -Dimensions: 5930/1650/H1600 mm -Weight: 7500 kg

Year of construction: 1983, condition: good (used), machine/vehicle number: 2103, max. bore of chuck: 1 - 20 Ø mm max. boring diameter: 20 mm mm cap washer diameter: 100 mm cap washer rotation: ca. 4500 Upm Iodpfx Adjdnfz Njiea engine: 380 V, 0,25 kW space needed: 600 x 450 x 1380 mm

Condition: used, functionality: fully functional, spindle bore: 41 mm, turning length: 1,000 mm, Amutio Cazeneuve Lathe Model HB 500, 1000mm e.p. Max diameter on bed 500 mm, max diameter on cross slide 300 mm, shank hole 41 mm, 18 speeds from 25 rpm to 2000 rpm. With Fagor dimension display, with fixed and mobile rests, with protections, connected to 220 V Ijdpev Rnfqjfx Adioa