Lathe

WMW DLZ 630 IV x2000

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Nljdpfxjv N Hc Se Ah Uok

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers Njdpfowc D Dxsx Ah Uslk - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW Nodpfxsfg E Hpo Ah Ujlk weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Discover our selection of robust and precise conventional lathes! Are you in search of a reliable lathe that boosts your productivity? Experience precision and performance with our new conventional lathes equipped with a wide range of accessories. Our machines offer turning diameters from 400-1000mm and turning lengths up to 10m, also available as a cycle variant. With various models, you have limitless possibilities. Some machines are quickly available from stock! Explore our extensive special accessories, such as hollow spindle, infinitely variable speeds, Siemens controls, and more, to make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Trust in our long-standing experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here's a selection of STOCK MACHINES (see images), and we are happy to offer additional models or special machines upon request: Technical Main Data: DLZ Series including 15% or more BAFA subsidy! - Turning diameter over bed: 400-1000 mm - Turning length: 1000/1500/2000/3000 mm - Spindle bore: 80 (opt. 105) mm - Workpiece weight up to 2t - Spindle speed up to 2800 rpm Accessories: Digital display, 3-jaw chuck, faceplate, Multifix tool holder, and more. Extensive SPECIAL ACCESSORIES such as infinitely variable speed, steady rests, larger spindle bore, and more to make the machine even more productive. Currently available new machines with warranty and BAFA subsidy, for example: - SDM 850: Turning diameter over bed 850mm, turning length 3m Nledod Afn Iopfx Ah Uok - DLZ 325: Turning diameter over bed 650mm, turning length 2m and 3m - DLZ 250: Turning diameter over bed 500mm, turning length 1m and 1.5m - DLZ 200: Turning diameter over bed 400mm, turning length (missing information) More models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: - Consultation and solution finding at your location - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 Nedpfx Ahjwk Iq Es Uslk - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 1967, functionality: fully functional, table width: 1,000 mm, table length: 810 mm, overall weight: 11,000 kg, workpiece weight (max.): 1,200 kg, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, spindle diameter: 120 mm, space requirement height: 2,475 mm, space requirement length: 3,970 mm, space requirement width: 2,230 mm, Equipment: rotational speed infinitely variable, - Maximum power consumption: 14 kW - Rated spindle power: 8 kW - Spindle drive power: 8 HP - Control voltage: 110 V Nsdpfxowdwqnj Ah Uolk - Table rotation continuously 360 degrees in both directions - Transverse table stroke (X-axis): 760 (+20) mm - Longitudinal table stroke (Z-axis): 760 (+20) mm - Vertical headstock stroke (Y-axis), min. and max. height of the spindle axis above the table: 50-710 (+20) mm - Rapid traverse: 2 m/min - 9 adjustable feed rates: 0.04 - 0.6 mm/rev - Hydraulically continuously adjustable working feed rates in manual mode (strokes): 0 - 3000 mm/min - Optical reading accuracy: linear axes 0.001 mm / manual rotary axis 1 sec. arc - Positioning referenced Accuracy on the built-in scales: ± 0.0015 mm / ± 2 sec. arc - With central lubrication of the guideways - Internal spindle: ISA No. 40 steep taper with Dixi bayonet, diameter 75 mm - Extras: Various tool holders, accessories, and operating instructions are included.

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm Nsdpsu Ix H Dofx Ah Uolk w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m CNC vertical lathe - vertical - NEW ( It is a demonstration machine on the photos) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: new, The Turnado 230/2000 is a versatile and robust Conventional Horizontal Lathe from KNUTH, designed for various machining needs within the Engine Lathes product group. This modern version of the classic lathe features a heavily ribbed machine bed and a powerful main motor, providing high torque and a wide range of spindle speeds. It includes essential accessories such as a 3-jaw lathe chuck, a 4-jaw independent chuck, and an integrated coolant system, making it efficient for operational tasks. The user-friendly control panel ensures easy operation, while the high-quality spindle support delivers precision even under heavy loads. With a maximum workpiece length of 2,000 mm and a turning diameter of 460 mm, this machine is built to offer lasting high value and high productivity. You can request a quote to enhance your machining capabilities with the Turnado 230/2000, your ideal choice in the Conventional Horizontal Lathes category. Nlodop Ebgrepfx Ah Ujk

Condition: used, Year of construction: 2019, Welding machine Manufacturer: Merkle Type: HighPulse 552 RS Year of manufacture: 2019 Nedpfxswvt Rne Ah Uolk Water cooling Wire feeder and torch incl. Binzel safety shut-off Welding machine suitable only for robotic operation, not suitable for manual operation!

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Njdpfxsrzbkto Ah Uslk Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen