Hydraulic single column press

ZEULENRODA

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Nedpfx Agszgbyvoyelc Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm Nlsdpsvuuckjfx Agysc dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: new, Year of construction: 2026, machine/vehicle number: 06-26-005, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 360 mm, ram plate width: 750 mm, ram plate length: 450 mm, distance table to ram: 800 mm, total length: 2,200 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic single-column press PYE 160 S1/M >completely overhauled / CE marking with  24 months warranty< from the manufacturer ZEULENRODA PRESSTECHNIK Hydraulic press for forming and assembly operations, pressing force 160 t Complete overhaul with CE conformity Ram stroke: 500 mm Clamping plate, press table: 900 x 580 mm with customer-specific clamping arrangement One-piece C-frame press in steel welded construction Newly manufactured table and ram plate according to customer requirements! Ram plate, twist-proof 3-sided protective guard, on the operator side via light curtain, on the side via sliding guard elements SIEMENS control system -new- Conversion to electronic stroke measuring system Remote maintenance ----- Further services, plant retrofit Control / Operation: • Rapid traverse function • USB interface for data exchange • Touchscreen / visualization SIEMENS • Two-hand control unit with two-channel monitoring of the two-hand synchronous circuit on the press table, (incl. 5m cable) • Limit switches for stroke adjustment are replaced by initiators • Monitoring of the initial stroke after completion • Replacement of the existing 60-V DC solenoids on the pilot control valves with 24-V DC solenoids, including the necessary intermediate plates Nsdjzf Ht Sopfx Agyslc • The press has an electronic stroke measuring system (including teach-in function and display of the current ram position). This eliminates the mechanical cam switching mechanism. Hydraulic system • Hydraulic safety block for monitoring the closing movement on the main cylinder • Position-monitored directional control valve for the up and down movement of the ram • Replacement of the motors of the main and control pump • Replacement of the seals on the main cylinder • Fine filter with contamination indicator • All installation and piping work New documentation including CE declaration of conformity Delivery time / Implementation time: approx. 5 months

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Nledpfx Aoqy E I Regyoc

Condition: new, Year of construction: 2024, pressing force: 175 t, working width: 3,050 mm, A high-performance DURMA press brake type AD-S 30175 is for sale. With its extensive standard equipment and selected options, it is ideally equipped for the demanding tasks involved in metal processing. Standard equipment: Capacity and size: 3050mm x 175 tons Installation height: 530mm Projection: 450mm Stroke: 265mm Axis control: Precise control with 4 axes. Safety systems: Manuel F. AKAS FPSC safety system, CE F.AKAS BVLT light barriers and safety cages provide maximum protection. Backgauge: Servo motor backgauge & linear guide & ball screw system for maximum precision. Tool clamping system: European standard for fast and safe tool changes. Front arms: Movable, supports the handling of different workpiece sizes. Selected options: Control unit upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization. Crowning: Motorized adjustment, for even more precise bending results. Backgauge: Extended with motorized X, R-axis backgauge (X=650mm), increases flexibility and precision. Quick clamping: Manual quick clamping for more efficient tool changes. Nlsdpfxsrx Rkuo Agysc This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency and safety. For more information or if you are interested, please contact us. Don't miss the chance to expand your production capacity with this high-quality machine.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Nsdpfxotzwxdo Agyjlc Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, power: 12.5 kW (17.00 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,400 kg, distance between stands: 800 mm, PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Nsdetzxvwspfx Agyjlc Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm Nledpfx Ajvc Ax Nogysc mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Nljdjygtzyjpfx Agyoc

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Nodpfjwbt Uqsx Agyslc Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: good (used), Year of construction: 2016, Industrial robot Manufacturer: Kuka Type: KR30-3 Year of manufacture: 2016 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 controller Nljdsq Dz H Tepfx Agyoc Weight: 150 kg Software version: V8.3.40 Interface: X11 Kuka touch panel Kuka connecting cables 24626

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Nodjvcb Tljpfx Agyolc

Condition: ready for operation (used), machine/vehicle number: 13214814, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, pressing force: 250 t, year of last overhaul: 2010, Equipment: documentation/manual, Hydraulic press, 250 tons – fully functional, manufactured in former East Germany (DDR), model VEB Wema Zeulenroda. Nljdpjzbyxnsfx Agysc

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Njdpfefxyigjx Agyolc Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Njdpfx Agou Nfuqjyelc Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *