Used horizontal band saws - automatic - cutting range from 400mm for sale (75)

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 61300 € 1158.57 € Doppelsäulenführung 6000 x 41 x 1,3 mm 20 - 100 m/min 560 mm 560 mm 600 x 560 mm 810 mm 2.2 kW 5.5 kW 0.12 kW 3250 mm 2200 mm 2350 mm 4500 kg Hydromechanical band tension Continuously variable bandspeed (inverter) Linear guide Feed vice with servo drive with 700 mm stroke or 9.999 mm for multi-stroke Control panel with touchscreen (50 cutting lengths / 30 programs) Planetary gearbox Saw pressure adjustment Gbodpfx Aaoynmy Ssnow Band deflection sensor Coolant device Chip brush Optical height adjustment OPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting line

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 510 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 2,220 mm, total length: 2,000 mm, total width: 2,850 mm, overall weight: 3,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the HBE411A Dynamic bandsaw automaton Band guide components made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This allows for a noticeable increase in the service life of the saw blades. Auto-Feed Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed rate and cutting speed. Energy efficient The use of modern drives and a special hydraulic system reduces energy consumption by approximately 30% compared to the previous model. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Electrically driven chip brush with Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Gedpfx Aez Rwx Ioanjbw Servo feed system The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Your advantage: higher cutting performance and longer blade life! Automatic guide arm adjustment This provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Easy operation Quick and easy operation of all functions of the bandsaw via touch control. Double clamping device offers process reliability – especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the bandsaw and fix both the initial material and the sections that have just been cut.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, control type: CNC control, overall weight: 6,300 kg, year of last overhaul: 2025, degree of automation: automatic, AMADA HFA 530 CNC – Fully Automatic CNC Band Saw Overhauled in 2025 | Ready for immediate operation The AMADA HFA 530 CNC is a fully automatic CNC band saw designed for high-precision metal cutting, serial production, and heavy-duty industrial applications. Thanks to its rigid 6.3-ton construction and advanced CNC control, the machine delivers stable, accurate, and repeatable cutting results. Key features & advantages: ● fully automatic CNC band saw for metal cutting ● overhauled in 2025 – machine ready for immediate use ● heavy-duty construction, machine weight 6.3 t, low center of gravity ● rigid frame design minimizing vibrations and improving cutting accuracy ● wide cutting capacity: - round material up to Ø 530 mm - rectangular material up to 530 × 530 mm ● hydraulic blade tensioning for constant cutting quality and extended blade life ● infinitely variable blade speed via frequency inverter (15–120 m/min) ● worktable load capacity 4000 kg – ideal for heavy workpieces ● minimum cutting length 10 mm, perfect for serial and batch production ● advanced CNC control system: ● easy and fast programming ● automatic cutting cycles ● high productivity and repeatability Technical specifications: ● Cutting capacity: - round: 30–530 mm - rectangular (W × H): 30 × 30 – 530 × 530 mm ● Worktable load capacity: 4000 kg ● Blade size: 67 × 1.6 × 6670 mm ● Blade speed: 15–120 m/min, inverter controlled ● Blade tensioning: hydraulic ● Power supply: 400 V ● Minimum cutting length: 10 mm ● Control system: CNC ● Connected load: 13 kW ● Machine weight: 6.3 t Condition & availability: - machine overhauled in 2025 - fully functional and tested Gbjdpfx Aeyat Uteanow - available immediately Contact us for price, inspection, or further technical details.

Condition: used, functionality: fully functional, Istech 431 NC bandsaw, year 2007, round cutting capacity 430 mm, square cutting capacity 430x430 mm, cutting stroke 500 mm, blade motor power 5.5 kW. Dimensions: 240x260x260(h) cm, Weight 3500 kg. Gjdpfx Aswvqpujanobw

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light Gbjdpfx Aajfg E Hvsnew • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen Godjymf Sdepfx Aansbw - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Year of construction: 2001, Wheel diameter 680 mm sawblade length 8550 mm Sawblade width max. 1,3 mm Cutting height mm Motor output 20 kW Table dimensions 600 x 620 mm Gbedpfet Hw Uijx Aanew Feed speed m/min. Machine height mm Weight 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry)

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Gjdpfx Ajynnhqoanebw Coolant device Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8200 x 54 mm cutting width 1,6 mm Capacity 90° - rectangle 650 x 850 mm Capacity 90° - square 650 x 650 mm Gbedpeyk Ikqjfx Aanjw total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 6400 kg dimensions of the machine ca. 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, neu ca. 4-6 Monate ab Auftrag Türkei 30900 € 590.19 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 560 mm 560 mm 570x560 mm 590 mm 1.1 kW 4 kW 0.12 kW 500 mm 1050 mm 2050 mm 2242 kg NC control double column band saw 3° cutting angle Gsdpfx Aeynm Rweanjbw blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH

Condition: used, Year of construction: 1985, cutting diameter 1300 mm saw band length 11880 mm Godozfqhtepfx Aanobw cutting width 1,6 mm main drive motor 11 kW table surface area 2300x1200 mm cutting range 1300x1300 mm total power requirement 16 KVA weight of the machine ca. 17,75 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 50900 € 962.01 € Doppelsäulenführung 5750 x 41 x 1,3 mm 20 - 120 m/min 420 mm 420 mm 420 x 420 mm 805 mm 1.1 kW 5.5 kW 1 kW 0.12 kW 2860 mm 1980 mm 2100 mm 3700 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Godpfxewiq Dfe Aansbw Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW Gbodpet Eacgsfx Aanew weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Year of construction: 2001, power: 12 kW (16.32 HP), total height: 3,270 mm, total length: 4,000 mm, total width: 2,250 mm, overall weight: 4,400 kg, Capacity 90°: 530 x 530° Min. cutting length:40mm Max. sawing: 17 - 110 Power: 12kW Gedpfx Asu U Nareanobw Chip conveyor: Yes Length: 4000mm Width: 2250mm Height: 3270mm Weight: 4400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1985, cutting diameter 1300 mm Gbedpfx Aaszfqg Njnow saw band length 11880 mm cutting width 1,6 mm main drive motor 11 kW table surface area 2500x1300 mm cutting range 1300x1300 mm total power requirement 16 KVA weight of the machine ca. 17,75 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Gjdpfxjwm Rm Io Aanebw Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Gbjdpjtqqrfofx Aanjw Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which Gsdpfxjfg E Hne Aanobw ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m Gbedpfx Asfu Nbbeanew For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. Gsdpfx Aaefg E Hmjnobw The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed Gbedpfx Aajfgyifjnsw vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m Gjdpofgyigefx Aanjbw 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 122668, functionality: fully functional, cutting height (max.): 460 mm, cutting width (max.): 600 mm, saw band length: 7,470 mm, saw band width: 54 mm, section length (max.): 760 mm, section length (min.): 8 mm, TECHNICAL DETAILS Saw Blade Dimensions: 7,470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1:7) Working Area Material diameter - round material: max. Ø 460 mm Gbsdszmdrnopfx Aansw Material dimensions - square material (w x h): max. 600 x 460 mm Cut-off length - single stroke: min. 8 mm, max. 760 mm Cut-off length - multiple strokes: min. 8 mm, max. 9,999.9 mm Minimum part length in automatic mode: 90 mm Working Height Working height: 720 mm MACHINE DETAILS Dimensions & Weight Dimensions (L/W/H): 2,320 x 3,660 x 2,570 mm Width with chip conveyor (option): 4,650 mm Weight: approx. 6,000 kg Electrical Data Main motor: 7.5 or 9.2 kW Hydraulic motor: 2.2 kW Saw drive motor: 0.18 kW Coolant pump: 0.19 kW Chip conveyor (option): 0.18 kW Roller conveyor drive (option): 0.8 kW NC positioning drives (option): 0.37 kW

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,920 kg, controller model: Siemens Simatic HMI, cutting diameter: 320 mm, cutting speed: 130,000 mm/min, saw band length: 6,300 mm, The machine was overhauled by Kasto in 2016! TECHNICAL DETAILS Cutting diameter: 320 mm Saw band length: 6,300 mm Cutting range: 420 x 320 mm Cutting speed: 20 – 130 m/min Material support height: 950 mm MACHINE DETAILS Control: Siemens Simatic HMI Total power requirement: 15 kW Dimensions & Weight Space requirement: approx. 6.35 x 6.76 x 2.41 m Machine weight: approx. 2,920 kg Pneumatic connection: 6 bar Coolant: 75 l Pump capacity: 40 l/min EQUIPMENT Infinitely variable feed rate Roller conveyor Chip conveyor Technical documentation Gsdpfxoywhdfo Aanebw The machine is supplied without robot and loading system. The machine must be reprogrammed by the customer for stand-alone operation.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 760 mm, cutting range round steel at 90°: 400 mm, saw band length: 5,920 mm, working height: 720 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: infinitely adjustable (1:7) Gedpjy Ex E Nofx Aansbw Working range (round): max. 400 mm Working range (square): 400 x 370 mm Cut length (single stroke): 10 - 760 mm Cut length (multiple stroke): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Min. finished part length: 10 mm (35 mm vertical) Note: Disassembly and loading can be offered by the seller at an additional cost. The roller conveyor is not included in the offer.