Used horizontal band saws - half-automatic - cutting range 0-300mm for sale (116)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting Iedpfx Ajfgyh Ueh Ueik cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Year of construction: 2020, condition: as good as new (ex-display), Band saw machine Make: KASTO Model: micut P 2.6 Year of manufacture: 2020 - Demonstration machine Machine No.: 6151 101 006 with warranty standard equipped with: - infinitely variable cutting speed 20 - 110 m/min - horizontal vice, manual clamping - Infinitely variable miter adjustment (-45° to +60°) - Infinitely variable saw band arm adjustment - Adjustable saw feed via own weight - Cutting bar as material support - Automatic switch-off after end of cut - Coolant system - Operating instructions with the following options: Ijdpjdur E Ajfx Ah Ujik - Drip oiler

Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. Isdoiy Rc Rspfx Ah Ujik The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: - HBE261A - HBE321A - HBE411A - HBE511A

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical data: - Cutting range at 90° round 260 mm - flat 450 x 240 mm - Cutting range at 45° round 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - saw band dimension 3660 x 25 x 0,9 mm - cutting speeds 20 / 35 / 50 / 70 m/min Ijdpfx Aogin Ndeh Ueik - Hydr. lifting + lowering of the saw frame - cutting pressure infinitely variable 0 - 10 m/min - Total drive power 400 V / 0,8 kW - Coolant device - space requirement approx. W 2100 x H 1200 x D 1000 mm - weight approx. 500 kg

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, saw band length: 3,660 mm, overall weight: 1,300 kg, cutting height (max.): 300 mm, table length: 400 mm, in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Iisdpfx Ahowvvr Is Uek Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, The Italian-made Bianco MOD. 280S band saw is a reliable and versatile solution for metal cutting. Designed for profiles, pipes, and solid materials, it delivers accurate and efficient cuts. Thanks to its robust construction and easy operation, it is suitable both for workshops and industrial production. Model: Bianco 280S with rollers Cutting angles: 0° – 60° left, 0° – 45° right Max. round cutting capacity: up to ~250 mm Max. rectangular cutting capacity: up to ~280 × 200 mm Blade dimensions: 27 × 0.9 × 2950 mm Blade speed: multi-step adjustment Motor power: 1.5–2.2 kW Power supply: 400 V, 3-phase Weight: approx. 250–300 kg Advantages Original Italian Bianco quality and durability. Precise cutting geometry – less need for finishing. Isdpfx Aexdnv Ejh Usik Ability to cut at various angles. Sturdy and user-friendly design. Ideal for both single-piece and serial production.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Iiedpfx Ahofgyicj Ujk Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, PILOUS double miter band saw ARG 260 plus H with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, Belt tension indicator Roller conveyor D 300 / 3m incl. manual measuring system Roller conveyor D 300 / 3m Cutting range: Round:90° -45° +45° +60° in mm:260-175-200-125 Square:90°-45°+45° +60° Iiodpfx Aeilqbueh Uok in mm:255-145-185-120 Rectangle:90°-45°+45° +60° in mm.300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Motor from hydraulic unit 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm working height from vice 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Machine weight 490 kg

Condition: new, Year of construction: 2022, IN STOCK -- Semi-automatic metal bandsaw machine with high cutting precision! With this machine, miter cuts up to 45° on the left and up to 30° on the right are possible (swivel range 45° on the left and 60° on the right) Technical data: ● Cutting range: - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0,9-1,5 kW / 400 V / 50 Hz ● Band saw speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0,9 mm Iedpfxsmf T Hpe Ah Ujik Basic equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensors ● Easy and convenient clamping of the material via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, continuous adjustment of the saw for miter cuts ● Electrical blade tension monitoring with saw blade breakage control

Condition: used, Year of construction: 1996, cutting diameter 260 mm saw band length 2910 mm cutting width 0,9 mm capacity 45 degrees: round 200 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 300 x 260 mm capacity 60 degrees: round 165 mm capacity 60 degrees: square 150 x 150 mm capacity 60 degrees: flat 160 x 120 mm cutting speed 35 / 70 m/min Iodpstqql Tefx Ah Uoik dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 950 mm total power requirement 2,0 kW weight of the machine ca. 400 kg dimensions of machine L x W x H 1,70 x 0,90 x 1,67 Accessories: coolant

Condition: new, Optimum OPTIsaw SD 351 AV Semi-automatic double miter metal band saw With Siemens inverter drive. Professional and robust saw with a cutting capacity of up to 350 mm Description: Heavy industrial design Quiet running Manual or semi-automatic operation Infinitely adjustable saw band speed from 0-80 m/min. High cutting accuracy thanks to vibration-free operation Miter adjustment up to 60° by swiveling the entire saw frame With high-quality bi-metal saw blade as standard End stops adjustable to the degree chip brush Micro switch for automatic limit switch Roller support adjustable for long and heavy workpieces coolant pump Ball-bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed using the feed control valve on the control panel Generously dimensioned, hydraulic quick-release vice, self-closing, adjustable for large cross-sections Fully equipped machine; The user can work productively immediately after commissioning EMC class C2 2-channel safety chain with emergency stop Converter Siemens Sinamics G110M Functionality semi-automatic operation Closing the vise and activating the motor Lowering the saw frame for cutting The motor stops and the saw arm returns to the starting position Technical specifications: Dimensions and weights: Length (product) approx.: 1935mm Width/depth (product) approx.: 1425mm Height (product) approx.: 1626mm Weight (net) approx.: 600kg Electrical data: Power drive motor: 2.2kW Connection voltage: 400V Mains frequency: 50Hz Engine power hydraulic pump: 1.4kW Engine power coolant pump: 50W Total connection value: 3.8kW Machine data: Saw band speed(s): 15 - 100m/min Speed levels: continuously adjustable Saw band length: 2925mm Saw band width: 27mm Saw band thickness: 0.9mm Cutting angle: -45 – +60° Manual operation: hydraulically via push button Semi-automatic operation: automatic Iisdpfx Aedc H Uksh Usk Cutting areas: Cutting range 0° round (solid material): 270mm Cutting range 0° square (full material): 230mm Cutting range 0° standing rectangular (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (full material): 170mm Cutting range -45° standing (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (full material): 200mm Cutting range +45° standing rectangular (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (full material):140mm Cutting range +60° standing (solid material): 140 x 220mm

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 35 + 70 m/min Iijdsurc S Repfx Ah Usk total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m Double miter metal band saw, GBS 250 Super AutoCut (20413) - Miter cuts up to 60° left and 45° right - Ball bearing rotary table Quick clamping device Solid, large material support Automatic cooling

Condition: new, PILOUS double miter band saw ARG 300 plus H.F. with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, belt tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm Iedeh S Ikkopfx Ah Uoik Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor:400 V, 50 Hz, 2,2 kW Pump motor:400 V, 50 Hz, 0,05 kW Hydraulic power unit motor:400 V, 50 Hz, 0,18 kW Saw blade speed:15-90 m/min. Stepless Saw blade length:3150 x 27 x 0,9 mm Working height from vice: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm machine dimensions (max.)1700 x 2000 x 2150 mm Machine weight: 645 kg

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: Iiedpfx Ahjcgbq Ie Uok At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! Double miter metal band saw with: - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever Iiedpjd Iip Nsfx Ah Usk - Automatic cooling

Condition: new, Bernardo twin band saw MITRE MBS 300 DG-V PRO Technical specifications Cutting capacity round / square 90 ° 255 mm / 210 x 210 mm Section flat 90 ° 310 x 210 mm Cutting capacity round / square 45 ° R 220 mm / 210 x 210 mm Section flat 45° R 220 x 200 mm Cutting capacity round / square 45 ° L 230 mm / 200 x 200 mm Section flat 45° L 230 x 200 mm Cutting capacity round / square 60 ° R 135 mm / 135 x 135 mm Section 135 x 135 mm flat 60 ° R Working height 930 mm Band saw blade dimensions 2750 x 27 x 0,9 mm Cutting speeds, variable 20 - 80 m/min Coolant pump 100 W S1 motor power output 100% 1,5 kW Motor power S6 40% 2,2 kW Voltage 400 V Machine dimensions (L x D x H) 2000 x 1250 x 1900 mm Weight 350 kg Scope of delivery • Band saw blade • Workpiece stop Isdpfx Ahjd Hzbwe Ueik • Base • Belt tension gauge • Blade guide with tungsten carbide inserts • Quick clamping Vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW Ijdsfg E H Nspfx Ah Ujik weight of the machine ca. 440 kg dimensions of the machine ca. m Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise Iedpfofgyh Ssx Ah Ueik - Quick release lever - Automatic cooling

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and Iijdpfofg E Hpsx Ah Uek thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right Isdpfx Ahjhpktrs Ujik • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m Iisdpfeu Sbpvjx Ah Ujk double miter band saw

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button Isdpfx Ahsd Iip Re Ujik - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available) Iijdpfjfg E H Ijx Ah Uek

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: Ijdpfx Ahefgyh Ro Ueik - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm Iiodsxfwcdspfx Ah Uek saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m EXHIBITION MACHINE at a special price!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling