Used horizontal band saws - half-automatic - cutting range 0-300mm for sale (103)

Condition: ready for operation (used), Bewo Mod 270 Semi-automatic Hydraulic Bandsaw Metal Saw #2050230 Maximum clamping: 210x210mm Dimensions: 130cm x 80cm x 140cm (LxWxH) 380v Variable cutting speed With coolant pump With extra saw blade Video available on our YouTube channel. Location: Budel, Netherlands Transport available at additional cost Call or email for more information Fpsdpoylppwsfx Ad Nsf Also check out our other listings We are looking for industrial machines all year round. If you have surplus machines, send us an email with photos and information. The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition and wear are in line with its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration Fpjdpfx Asfgyh Uod Nsf • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Fpsdpfx Adoul Svlj Njf Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: CE marking, documentation/manual, Mep Bandsaw Model Shark 332-1 Fjdpfjyv Hl Ejx Ad Njpf Type Sxi Evo Semiautomatic Maximum Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Equipped with Electronic Scale Used Machine Internal Code: Svr398

Condition: used, Year of construction: 1990, functionality: fully functional, Technical Data: Description: Fully automatic band saw with dual-column guide for serial cutting Model: KAMU HB 270 A Year of Manufacture: 1990 Operating Modes: Manual, semi-automatic, fully automatic Working Range 90° round: ø250 mm Working Range 90° square: 250x250 mm Saw Blade Dimensions: 4,100 x 32 x 1.1 mm Voltage: 400/230 V 50 Hz Control Voltage: 230 V/24 V Fjdpoyrrctofx Ad Nspf Dual-column: Yes Equipment: Chip conveyor, right side / chip brush motor with chip brush / operating manual Drive Motor: Infinitely variable control via helical-worm gearbox, blade speed from 11–55 or 22–110 m/min Motor Power: 2.4/3 kW Saw Blade Tension: Hydraulic blade tension Roller Conveyor (optional): Approx. 3.8m roller conveyor, included free of charge (weight approx. 300kg) Machine Dimensions (L/W/H): Approx. 2,800 x 2,200 x 1,900 mm (without roller conveyor) Material Support Height: Approx. 750 mm Weight: Approx. 1,700 kg Overall Condition: Used, good, fully functional. Private sale, not a dealer. Machine can be demonstrated under power. All technical data subject to change without notice.

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm saw band length / mm table height / mm Fpjdpfx Asxbh Hfsd Nef

Condition: new, Model Name Fsdpfjgvkglox Ad Nopf Shark 281 SXI evo

Condition: new, Model Name Fodpfxjgvkcto Ad Nopf Shark 282 SXI evo

Condition: good (used), Used semi-automatic hydraulic band saw for metal Bianco MOD 330 SA 60° Blade dimensions: 3010x27x0.9mm Cutting angle: up to 60° Two cutting speeds: 35/70 m/min Hydraulic vice Cutting capacity at 0° - round 250mm - square 220x220mm - rectangle 320x220mm Machine weight: 425kg Fodpfx Aexpi E Sjd Njpf Year of manufacture: 2006

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Fpedswaauujpfx Ad Nsf Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm Fodpfjxaa S Rex Ad Nopf capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: flat 110 x 110 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC coolant tank 95.0 l total power requirement 1.5 / 1.8 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° Fpsdpfew U U Uwsx Ad Njf - MEP EVO microprocessor control for controlling all functions * Front right, rotatable - Optional manual or automatic saw bow lowering * Continuously adjustable saw bow lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioning - including digital value display - 2 saw blade speeds - 1 bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Functioning of semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display Fpjdexaatbjpfx Ad Nsf - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: used, Year of construction: 2009, cutting diameter 255 mm saw band length 2750 x 27 x 0.9 mm capacity 90 degrees: flat 300 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 170 x 120 mm capacity 60 degrees: round 110 mm capacity 60 degrees: flat 110 x 150 mm table height 900 mm Control konv. cutting speed 36 m/min clamping range 305 mm total power requirement 1.5 kW weight 440 kg range L-W-H 2000 x 1200 x 1950 mm Features: - Electro-hydraulic metal band saw - With miter adjustment 45° right / 60° left - Manual saw cut (with manual lowering) - Hand switch on the saw frame (saw blade on/off) Fedpfx Ajxacb Iod Nspf - Electro-hydraulic material clamping (close/open switch) * Includes handwheel for vise adjustment - Handwheel for manual saw blade tensioning - Coolant system - Emergency stop button at the front - Operating instructions (English)

Condition: used, Year of construction: 2015, cutting diameter 230 mm capacity 90 degrees: flat 320 x 130 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: flat 230 x 140 mm capacity 45 degrees: round 220 mm capacity 45 degrees: square 190 x 190 mm capacity 60 degrees: flat 120 x 105 mm capacity 60 degrees: square 105 x 105 mm capacity 60 degrees: round 120 mm turning speed range: 35 - 70 m/min dimensions of saw-band 2720 x 27 x 0.9 mm height of material-table 950 mm total power requirement 1.0 / 1.5 kW weight of the machine ca. 410 kg dimensions of the machine ca. 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: Fsdpfxjxaa Ras Ad Nepf - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User manual in German

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 9210 € 177.75 € Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch 910 mm 0.37 kW 1.5 kW 0.12 kW 1730 mm Fpodpowirktjfx Ad Nsf 770 mm 1460 mm 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 OPTIONS: Roller tables and band saw blades on request Fpedpowiqndjfx Ad Nef

Condition: used, Technical details: cutting diameter: 280 mm saw band length: 3660 mm saw band width: 25 mm Cutting height: 280 mm application:: Metallsägearbeiten cutting width: 400 mm cutting speed: 35 - 70 stepless m/min machine weight approx.: K.A. kg dimension machine xH: 1,4 x 1,8 x 1,2 m robust and accurate automatic band saw miter cut possible incl. roller conveyor with access approx. 6000mm and exit 3700mm Fpodpfx Adeu Nih Ij Nef *

Condition: used, Year of construction: 1991, Technical details: Fpedpfx Adou Nihus Nsf cutting diameter: 240 mm saw band length: 3000 mm saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm *

Condition: new, Year of construction: 2026, Compact, fully automatic band saw (also miter cuts up to 45°) Torsion-resistant, robust cast iron saw frame Driven chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting and subsequent raising of the saw frame to the continuously adjustable, preset starting position Mechanical saw blade tensioning with electrical blade breakage monitoring Minimum remaining piece length 180 mm, smallest possible diameter 5 mm Feed accuracy of 0.2 mm Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Easily removable chip collection tray Including saw blade with combi-toothing 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Motor: Three-phase, 400 V, pole-changing (kW) 1.1/1.5 Saw blade dimensions (mm) 2720 x 27 x 0.9 Flywheel diameter (mm) 300 Cutting speed (m/min) 40 – 80 Clamping width (mm) 275 Working height (mm) 768 2220 x 1650 x 1730 mm Weight (kg) 495 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? Fpsdpfotpg Sajx Ad Nsf WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, The SBS 255, part of the Horizontal Mitre Cutting Bandsaws category and the Semi-Auto Bandsaw group, is a compact, robust machine designed for efficient machining of small batches. This universal workshop band saw features a one-piece cast-iron saw frame that is torsion-proof and swivels 60° to the right and 45° to the left, allowing for versatile cutting options. With a rigid vise equipped with lateral slide and long guideways in the movable jaw segments, users can achieve precise cuts on various workpiece sizes, thanks to the combination of carbide jaws and adjustable ball bearing guides. The SBS 255 operates quietly, ensuring short machining times and easy handling, which leads to increased productivity. Additionally, it is powered by a strong motor for continuous operation and comes with a high-capacity coolant system. Included with the saw are essential tools like a saw blade, base, pressure gauge, and operator instructions. KNUTH provides the quality assurance you expect, so order online today to enhance your workshop with the SBS 255 Horizontal Mitre Cutting Bandsaw. Fpsdpeuyiqdofx Ad Nof

Condition: new, Year of construction: 2026, Standard Features Torsion-resistant, robust cast iron saw frame Powered chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting Mechanical saw blade tensioning with electrical blade breakage monitoring Slidable quick-action vise Fsdpfefg Eq Rox Ad Njpf Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Large round support table, rotates during miter cuts, miter indicator (scale) on the operator side Direct switching from manual to lowering mode Easily removable chip collection tray 500 mm material stop with scale Including saw blade with 4/6 combi toothing. Technical Specifications Motor: Three-phase 400 V, pole-changing, 1.1/1.5 kW Blade dimensions: 2720 x 27 x 0.9 mm Flywheels: 300 mm Ø Cutting speed: 40/80 m/min Vise clamping width: 275 mm Working height: 978 mm Weight: 370 kg Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting area: see data sheet Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, High-performance band saw machine with hydraulic saw frame lowering (control valve) for miter cuts from 0° to 60° right / 45° left Torsion-resistant, robust cast saw frame Powered chip removal brush Cut feed via frame weight Miter angle adjustment and clamping manual Quick-action, movable vise Electric coolant pump Precision-ground, carbide saw band guides (adjustable) Large-diameter round support table, rotates with the miter, miter scale visible from the operator side Fpedsxlhmyjpfx Ad Nef Easily removable chip tray Material stop 500 mm with scale Includes combination-tooth saw band 4/6. Technical Data Motor: three-phase 400 V, 1.5 kW Saw band dimensions: 2720 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min Vise clamping range: 320 mm Working height: 760 mm Weight: 390 kg Machine dimensions (W x D x H): 1480 x 1700 x 2000 mm

Condition: new, Year of construction: 2026, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vice Shutdown after cutting, return of the saw arm to its starting position Torsion-resistant saw frame made of cast steel (multi-ribbed) Hydraulic short-stroke cylinder for the vice Precision-ground carbide saw blade guides, adjustable Electric coolant pump Manual blade tension with display, including electric saw blade and cutting pressure monitoring Hydraulic vice (opening and closing) Revolving chip removal brush Large, solid round support table, rotating for miter cuts with a predefined cutting channel, manual miter adjustment, readout via scale 500 mm material stop with scale Including combi-toothed saw blade 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor: 400 V three-phase, frequency-controlled, 1.5 kW Saw blade dimensions: 2910 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min. Fpodpfx Aocl Tc Aed Nef Vice clamping width: 320 mm Working height: 760 mm Sawing range: at 0° = round diameter 250 mm, square 240 x 240 mm, rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight: 420 kg Please inquire about additional accessories. DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11640 € 223.49 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 300 mm Fodpfx Ajynm S Iod Nopf 240 mm 420x200 mm rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 830 mm 1650 mm 1200 mm 1900 mm 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,--