Used horizontal band saws - half-automatic - cutting range 301-349mm for sale (51)

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Pedped Iiptefx Adiord

Condition: excellent (used), KASTOmicut U 2.6 – Semi-Automatic Pivot Frame Bandsaw incl. Long Roller Conveyor For sale is a heavy-duty, semi-automatic pivot frame bandsaw KASTOmicut U 2.6. The machine features infinitely variable cutting speed and is ideally suited for all cross-cutting and mitre tasks (-45°/+60°) on pipes, profiles, and solid materials in workshop environments. The fully hydraulic saw feed and hydraulic material clamping enable semi-automatic, sensitive, and tool-preserving sawing operations. — Features • Hydraulic saw feed • Rotary table as material support • Hydraulic material clamping • Infinitely variable cutting speed • Mitre cuts to both sides from +60° to -45° — Technical data • Dimensions (L × W × H): 760 × 1620 × 2040 mm • Material support height: 950 mm • Total weight: 510 kg • Total power: 2 kW • Cutting speed: 20 – 110 m/min • Saw band dimensions: 3,180 × 27 × 0.9 mm • Saw band guides: Side and back roller guides, replaceable • Material clamping: Mechanical • Saw feed: Hydraulic, continuously adjustable • Saw band tension: Mechanical • Saw band cleaning: Fitted with a replaceable wire brush — Cutting capacities • 90° round (solid/pipe): 160 / 260 mm • 90° flat (W × H) (pipe): 310 × 260 mm • 90° square (solid/pipe): 160 × 160 / 260 × 260 mm • +45° round (pipe): 220 mm • +45° flat (W × H) (pipe): 200 × 200 mm • +60° round (pipe): 140 mm • +60° flat (W × H) (pipe): 140 × 140 mm • -45° round (pipe): 240 mm • -45° flat (W × H) (pipe): 200 × 260 mm • -45° square (pipe): 210 × 210 mm • Minimum remnant length: 30 mm — Condition & Delivery The machine is in perfect working condition and ready for immediate use. • Shipping on a pallet by freight forwarder possible Europe-wide • Additional machines available – check our listings for more offers — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Prodpfxsxizabj Adijd

Condition: good (used), Sawcapacity at 90 degree: Round: Ø303 mm, Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm, Square WxH: 265 x 300 mm Pjdpfx Adjugtqrjisrd Sawcapacity at 30 degree: Round: Ø175 mm, Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm, 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: used, Year of construction: 2013, machine/vehicle number: F3-1195, Offer 25172 Hydraulic horizontal double-column-guided miter band saw machine Pjdpewptypsfx Adierd Technical data: - Automatic operation cutting process, hydraulic lift/lower of the saw frame, manual miter adjustment with manual clamping - Saw band dimensions: 3660 x 27 x 0.9 mm - Cutting speed: steplessly adjustable 16 - 73 m/min - Cutting pressure regulation: stepless 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: 30° - 90° - at 90° round: 305 mm - four-sided/flat: 360 x 305 mm - at 45° right, round: 305 mm - Square: 255 x 305 mm - at 30° right square: 175 x 305 mm - Hydraulic material clamping - Coolant system - Discharge conveyor with length stop: 4000 mm - Drive: 400 V / 3 kW - Required space: approx. W 1150 x H 1600 x D 1800 mm - Weight: approx. 750 kg

Condition: new, Year of construction: 2024, 320 mm 4160 mm 610 mm 320 mm 610x320 mm Pedpjwp Tkbjfx Adisrd dimensions of saw-band 4160x34x1,1 mm

Condition: good (used), Year of construction: 2000, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Prjdpfsw Rz Shjx Adiod

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 18 - 110 m/min table height 940 mm Predpfxenq Sans Adijd total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, 1 brand-new semi-automatic high-performance horizontal bandsawing machine with double column guidance and 2° cutting inclination to the table support surface Make: HUVEMA / BEKA-MAK, Origin Turkey Model: BMSY 330 C Technical data: Sawing capacity 90° round 330 mm Sawing capacity 90° rectangular 360 x 330 mm Sawing capacity 90° square 330 mm Sawing capacity 45° round approx. 250 mm Sawing capacity 45° rectangular approx. 250 x 325 mm Sawing capacity 45° square approx. 250 mm Size of the saw blade 5000 x 34 x1,1 mm Infinitely variable band speed 20 - 100 rpm. working height 635 mm Engine power 3 kW hydraulic motor 0,55 kW Dimensions L x W x H 2830 x 920 x 1630 mm Machine weight 1030 kg Accessories / Special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to the table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform Delivery time: approx. 8 weeks after receipt of order Predpfx Asfk Eu Nodisd Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, drill diameter: 32 mm, product height (max.): 330 mm, product height (min.): 5 mm, product width (max.): 625 mm, product width (min.): 35 mm, rotational speed (max.): 1,600 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: CNC drilling system for wide flange beams & welded double-T profiles Working area: 35 x 5 - 625 x 330 mm Drilling data Drilling spindles vertical Y / horizontal Z+W: 1 / 2 pieces Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid forward/reverse: 10,000 mm/min Drilling feed: 20 - 160 mm/min Rapid positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 pieces Drive power 3 drilling drives: 5.5 kW (frequency controlled) Total power: 16.5 kW 6 positioning drives: 0.75 kW Total power: 4.5 kW Working environment Working height above floor: 640 mm Transport system Cross transport on the feed side: 6 liftable conveyor chains, depth: 3.6 m Feed roller conveyor: length 12.1 m for material Discharge roller conveyor: length 6.1 m for material Cross transport on the discharge side: 4 liftable conveyor chains, depth: 4.6 m Pjdpfx Ajvzp Uzsdiord Automation module: for feed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phases + earth Supply line fuse: 35 A (slow) Power consumption (max.): 16 kVA Power consumption (nominal value): 13 kVA / 25 A Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer-side for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - Profile beam drilling machine KDE 603 DSTV+ module for nested reading - Miter band saw machine KBS 620 DG - Cutting monitoring system - Length measuring device model: M 120 PP - Transport system T12 - Safety barrier

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice Podewn Dy Depfx Adiord - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: new, Year of construction: 2025, 330 mm 5000 mm 450 mm 330 mm 450x330 mm Podpfx Ajwp Tc Djdierd dimensions of saw-band 5000x34x1,1 mm

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Prsdpfx Adjwigavjied Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right Prodsfd Abaopfx Adiod - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: used, Epple bandsaw BS 275 G - Shipping possible at an additional cost Prjdow E Hk Hopfx Adiod

Condition: used, functionality: unexamined, machine/vehicle number: 16124 91, saw band length: 4,100 mm, total length: 2,000 mm, total width: 1,150 mm, feed length X-axis: 1,200 mm, JAESPA W 320 G Horizontal Bandsaw Automatic 320 mm Hydraulically controlled horizontal bandsaw for solid and profile materials Prjdpfx Adsw Dzvnsisd Cutting range round: approx. 320 mm Material clamping: hydraulic Saw band length: 4100–4170 mm Machine control: manual/hydraulic Type plate no.: 16124 91

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Prjdpfx Asim Ildsdisd Technical data: - Cutting range at 90° round 320 m - flat 320 x 320 mm - Automatic material feeder - saw blade dimension 5095 x 34 x 1,1 mm - cutting speed 10 to 120 m/min - hydr. lifting - lowering of the saw frame - upper stroke limitation of the saw frame - cutting pressure infinitely variable - hydr. material vice - chip conveyor screw - coolant device - discharge roller conveyor 2500 mm - drive 400 V / 4,0 kW - space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, Metal band saw EM BS 350 DGHF with base frame Pedpfjwxad Tjx Adisrd

Year of construction: 2023, condition: new, Very robust and easy to use semi-automatic hydraulic double mitre band saw. Hydraulic saw feed and saw pressure separately adjustable, Vice can be operated hydraulically and manually, 2 saw band speeds as standard, material stop swivelling Coolant device and chip container Main technical data: Sawing length up to 450 mm Sawing height up to 320 mm Saw diameter up to 330 mm Power 2,4 KW - 4,0 KW dimensions lxwxh 2050x1180x1550 mm Illustrations (photos) with options Also available in other sizes (260 and 320 mm) Ask for a non-binding offer. We offer delivery, service, spare parts and saw bands from one source. Our postcode areas in Germany are 17,18,19,23 Prjdpfjhaq D Ijx Adisd

Condition: new, Year of construction: 2025, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Technical data: Cutting range in mm round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Saw blade drive with limit switch Prodpot D Azcefx Adied Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-135° The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does not change with the mitre angle Digital mitre display, accuracy 0.1° Fast material clamping. Material is always clamped at 90° regardless of the angle to be cut Hydraulic material clamping via full-stroke clamp MEBA – Power-Package “HSS“ Hydraulic lifting and lowering of the saw frame hydraulic clamping of the material stepless, hydraulic cutting pressure- and feed regulator display of lowering speed via scale display of cutting pressure via manometer rapid lowering of the s aw frame via button until material edge Complete coolant equipment with electro-pump Chip box Saw blade drive with end of cut stop Combined precise saw blade carbide-roller guidance with saw blade brush Instruction manual and spare parts list on CD-ROM Frequency regulated AC-drive 15-150 m/min, 3 kW Colour silvergrey/ bluegrey (RAL 7001 / RAL 7031) 1 saw blade 4/6 tpi Additional standard equipment for 405 DG --ᐳ Control panel separately mounted Model Semi-Automatic Miter 90° Ø 325mm, square 500x300mm 45° right Ø 360mm, square 300x300mm 30° right Ø 200mm, square 200x200mm 45° left Ø 300mm, square 300x300m Motor:[kW]3 Blade:[mm]4200x34x1,1 Blade speed: 15-150 m/min Working heigt:[mm]750 Psdpjbrq Txjfx Adiord

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Predjfibd Tspfx Adiod Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics. Key Advantages of the Machine Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel. Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation. Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials. Carbide and ball-bearing blade guides for durability and precise blade tracking. Quick-release vise, manually or hydraulically controlled, adjustable left/right. Miter cutting range from -45° to +60° with precise angle scale reading. Heavy-duty cast-iron frame ensures cutting stability and long machine life. Hydraulic feed rate control with adjustable return height of the saw arm. Construction and Technology The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating. Cutting Precision and Efficiency With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency. Applications The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing. Standard Equipment Control console with semi-automatic functions Hydraulic vise Blade cleaning brush Coolant system with pump Front material roller Dial gauge blade tension meter CE certificate and technical documentation (DTR) Technical Specifications: Parameter Value Working height 965 mm Cutting speed 20 – 70 m/min Blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total power 3.0 kW Pedpfx Adow U Svloiord Power supply voltage 400 V Dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: new, Year of construction: 2025, 2-column guided band saw in semi-automatic design with stepless mitre adjustment on both sides 30° - 45° - 90° - 135° With patented mitre system (ERP no. 0491120) Particularly suitable for universal use with different cross-sections cross-sections, materials and frequently changing miter cuts. Center of rotation remains unchanged at every angle setting, thus exact length measurement at 90° and in the miter area. MEBA Eco-Saw-Innovation 2000 The universally applicable MEBA 335 DG mitre band sawing machine is ergonomically perfected and has an optimum price-performance ratio. Simple central operation. The machine control system complies with CE standard 89/289 Technical data: Cutting range: round/flat 90° 335/500x335 45° right 330/305x335 30° right 180/170x335 45° left 305/305x335 Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit - Saw band 3 kW ; 400 V, 50 Hz - Hydraulics 0.55kW - Coolant pump 0.11kW Pjdpet Dpw Rjfx Adijrd Saw frame feed: infinitely variable up to 300 mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without set-up elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Subject to technical changes. Basic equipment of the MEBA 335 DG-500 Semi-automatic sawing sequence with workpiece clamping-sawing-up to set height after cutting is complete MEBA high-performance package: Infinitely variable hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Manual mitre adjustment, digital reading with 0.1° accuracy Rapid traverse lowering of the saw frame via pushbutton up to the material edge Patented double mitre system (ERP no. 0491120) Unique double mitre bandsaw with which mitres on both sides can be set simply and economically by swivelling the saw frame and the material support. Automatic movement of the clamping vices and digital miter adjustment The material clamping vise moves automatically in the direction of flow according to the desired miter, so the material is always clamped at right angles, close to the saw band. The mitre pivot point is the intersection point between the saw blade and the fixed clamping jaw, which means that the length dimension does not change when the angle position changes. Hydraulic full-stroke workpiece clamping. Quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame. Stable two-column linear saw frame Saw blade set at a 3° angle to the material support surface. Central machine operation Saw frame clearance height adjustment Movable band guide arm, adjustment to material width Saw blade deflection roller carbide guide Rotating chip cleaning brush Saw blade tension with torque wrench Operating instructions and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Year of construction: 2025, MEBA 335 G-500 and MEBA 335 GA-500 Central and easy to use control panel Movable blade guide arm, adjustable to suit material width Combined precise saw blade carbide-roller guidance with saw blade brush Saw blade cleaning brush Prsdpobi S H Iefx Adiod Saw blade tension with torque wrench Instruction manual and spare parts list on CD-ROM Coolant equipment can be combined with MEBA micro sprayer Colour silver grey / blue grey (RAL 7001 / RAL 7031) Lifting an lowering of the saw frame with a frequency regulated lead screw drive, with automatic cutting pressure and feed regulator. Rapid lowering of the saw frame via button until material edge Frequency regulated AC-drive 15-150 m/min Hydraulic material clamping via full stroke clamp Digital mitre display, accuracy +/-0,1° Mitre capacity 30° - 135° Patented mitre system (ERP Nr. 0491120) Automatic movement of the vices. The material is always clamped rectangular and close to the saw blade Model Semi-automatic Miter 45° left Ø 305mm, square 305x335mm 90° Ø 335mm, square 500x335mm 45° right Ø 330mm, square 320x335mm 30° right Ø 180mm, square 170x335mm Motor:[kW]3 Saw blade: [mm]4400x34x1,1 Speed: 15-150 m/min Working height: [mm]750

Condition: new, Year of construction: 2025, Semi-automatic sawing process with automatic clamping, sawing, and raising of the workpiece to preset height after the cut is finished Stepless hydraulic cutting pressure and feed monitoring at the saw band press. Therefore, optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal application with different cross-sections, materials, and frequently changing miter cuts The machine control complies with CE standard 89/289 Technical data: round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 Rapid feed lowering of the saw frame to the material edge by push button Manual miter adjustment from 90° - 30°, infinitely variable on a scale The miter pivot point is the intersection between the saw band and the fixed clamping jaw, resulting in no length change when adjusting the angle Hydraulic full-stroke workpiece clamping - CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant device with electric immersion pump Central machine operation Saw band drive with end stop Movable band guide arm, adjustable to material width Saw band deflection roller with carbide guide Predpfx Adshppabeiod Chip cleaning brush, rotating Saw band tensioning with torque wrench Painting silver-grey/blue-grey (RAL 7001/RAL 7031) Remnant length: 25mm Cutting speed: AC frequency-controlled drive 15-150 m/min continuously adjustable at the control panel Drive Saw band 3.0 kW; 400V, 50Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Continuously up to 300mm/min, hydraulically controlled Saw band tension: Mechanically with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser light Micro-spraying device Clamping pressure regulator Support table on the feed side