Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis Fsb Edujwb Eg Sjycegb

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, machine/vehicle number: 2092, travel distance X-axis: 36,000 mm, travel distance Y-axis: 5,800 mm, travel distance Z-axis: 1,250 mm, feed length X-axis: 36,000 mm, feed length Y-axis: 5,800 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, controller model: NUM 1060 W, workpiece length (max.): 34,000 mm, workpiece width (max.): 4,500 mm, workpiece height (max.): 240 mm, workpiece weight (max.): 25,000 kg, total height: 4,825 mm, total length: 43,700 mm, total width: 11,855 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 33,000 W, spindle nose: HSK 100F, number of spindles: 1, number of slots in tool magazine: 18, tool length: 400 mm, tool diameter: 750 mm, tool weight: 20,000 g, Equipment: rotational speed infinitely variable, CNC large joinery portal (manufacturer CMS, type "NC-PMC36-TUCU", year of manufacture 1999) for the processing of large-format solid wood components (glulam and CLT) for sale. The joinery gantry can be used for simultaneous 5-axis processing of large-format timber components up to 34.0 m long and 4.5 m wide. Among other things, this system was used to process the roof girders for the Expo roof in Hanover. The system consists of a massive movable bridge that is moved via guide rails at a maximum speed of 50 m/minute. The processing spindle is mounted on a carriage that enables movement in the Y and Z directions. A fourth axis allows the unit to rotate on the vertical axis, while the fifth axis allows the spindle to be tilted in the vertical plane. Today, the components are positioned on wooden beams in a fixed grid. The components can be machined on three sides using the appropriate sliding wooden blocks. Components with too little weight are fixed with screws during processing. Positioning is carried out using a laser system, which is not included in the scope of delivery. However, new laser systems can be implemented relatively easily. The system is currently controlled via a CAM system from Siemens. The CAM software is not included in the scope of delivery. However, all standard CAM systems can be used by adapting the post-processor. The vacuum system for fixing the components described in the enclosed order confirmation is not included in the scope of delivery. Fgsb Eevitzzsduyceb The system is extremely robust and solid and has provided good service for over 25 years. It can be inspected during operation. The guide rails, the bridge, the spindle and the entire mechanical design cannot be more robust and solid, even in new, comparable systems. However, it is recommended that the system be completely overhauled by means of a retrofit in order to comply with current safety regulations. Appropriate specialist companies can be named. The machine is to be handed over in April 2025 and dismantling should ideally be carried out by the buyer. However, only a limited time window is available for this.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0000002111, travel distance X-axis: 2,438 mm, travel distance Y-axis: 1,219 mm, Equipment: rotational speed infinitely variable, Machine in 'A1' Top Working Condition. 8' x 4' Flat Vacuum Table. 12 Position Tool Changer. Drilling Bank. Auto Oiling System. Fully Side guarded. c/w Operators Manual Can be viewed working. Location, n'r Oswestry, North Wales border. Fob Eduyevrdn Rjcogb To take out, load & deliver ask us for a quote from a specialist machinery mover. Photos & Working Video available on WhatApp, send your mobile number with your enquiry.

Condition: excellent (used), Year of construction: 2014, Working range: X-axis: 3280 mm Y-axis: 1620 mm Z-axis: 245 mm Feed speeds: X-axis: 80 m/min Y-axis: 60 m/min Z-axis: 20 m/min Vector speed: 100 m/min Electro spindle: HSD 5 axes 11 kW with continuous 360° rotation on B and C axes, enabling machining of complex shapes with high precision liquid cooled Drilling head: HSD  20 vertical spindles 4 horizontal grooving saw in X-axis grooving saw in Y-axis Working table:  6-piece beam 4 suction cups on 1 beam preparation for uniclamp Fsb Eduswhypnjycogb Tool magazines: 16-position turret magazine Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring a firm clamping of workpieces during machining Software: bSolid

Condition: used, Year of construction: 2017, Working dimension X: 3.200 mm Working dimension Y: 920 mm Working dimension Z: 70 mm Number of milling spindles: 1 Main motor power: 8 kW Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 7 Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Vertical working surface: Yes Machine table: Feed-through technology Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 8 m³/h Special workpiece clamping system: Vacuum clamping system Safety device: enclosed cabin Fgjb Eduswd Nzreyceb Milling for fittings: Lamello Clamex LAMELLO p-System: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: PC control Software: HOLZ-HER CAMPUS NC-HOPS, HOLZ-HER CAMPUS ACADEMY, PC office licence, HOLZ-HER CAMPUS MAKRO PAKET, HOLZ-HER CAMPUS V6 Conformity marking: CE mark

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. Fgjb Eduyotq Hkrscob - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, travel distance X-axis: 4,970 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, spindle speed (min.): 600 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of slots in tool magazine: 24, tool mount: 350 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Complete machine, with Coral filter system and SCM lifter for sale. The equipment has very little use. Numeric control machining centre, with mobile gantry and fixed worktable for the processing of solid wood and various types of materials: glued laminated timber, plywood, chipboard, MDF, Aluminium etc. Designed using the best three-dimensional solid modelling systems, the structure is composed of a machine bed and a mobile gantry made of electro-welded steel. Component's milling of machine bed are performed on high quality CNC machining centres, with one single positioning operation, in order to guarantee the very best planarity, perpendicularity and precise tolerances. The control unit is a numeric control interfaced with an industrial PC. The CNC solution with PC combines all of the qualities of numeric controls with the user-friendliness typical of personal computers. The PC allows to use the operator interface Maestro cnc, developed by SCM to make machine programming fast and simple even for the less skilled operator. Technical specifications: - drilled and tapped holes spaced 120x120 mm for vacuum connection of jigs and equipment fitting - groove scheme spaced 40 mm for suction cups or rubber gaskets - n. 2 working areas - max. dimension to work in Y direction = 2170 mm TELESOLVE teleservice via internet Mobile console with "eye-M PRO" integrated PC TECPAD - Remote machine control Mobile console with 7" touch-screen color monitor for control and management. Fgsb Eduyowd Nrdjceb PRISMA KT Machining Head The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality also with high stock removal. Technical specifications: Routing unit with 5 interpolating axes − electro-spindle with HSK 63F quick release tool-holder − Rotation speed 600-20000 rpm − right and left rotation − max power (S1/S6) 11/12 kW (15/16.5 HP) from 9000 rpm − Inverter − C-axis rotation = 640° − B-axis rotation = 270° − C-axis equipped with TTS locking system (Total Torque System – SCM Patent) − "For Life" grease lubrication − liquid cooling with heat exchanger - Automatic dust extraction hood with four positions and ON-OFF by workpiece program. Two 250 (300) m3/h - 50 (60) Hz vacuum pumps Vacuum pump for each half-table. Independent vacuum circuit for each half-table. PRO-SPACE Safety system – full protection of the machining head with anti-ejection strips curtains and bumpers with emergency sensors - Emenency cable in the operator area - rear and side protection along the perimeter Enclosed cable-holder chain MAESTRO ACTIVE Human-Machine interface software (HMI) Maestro active is the new interface software (HMI) which has been unified across all SCM technologies. A single operator can easily and confidently run multiple SCM machines, reducing operator training times and facilitating entry into production. Windows 10 embedded 64 bit operating system Maestro cnc programming software MAESTRO CNC SOFTWARE SUITE – USER INTERFACE AND PROGRAMMING Advanced nesting free-form + Label module for Maestro cnc Rapid 24 - Rear Tool store Circular tool store anchored to the mobile gantry. Max load 96 kg

Condition: excellent (used), Year of construction: 1993, CNC Superjunior Machine is still connected and located in South Tyrol The new SUPERJUNIOR is the result of years of experience gained from the success of previous versions and precise analysis of market demands and needs. This machine has an open structure, but with its actual work area, which has been expanded to its maximum size of 3000 x 900 mm, it offers such a wide range of performance and possibilities that it can be classified as a multifunctional work center. Fgeb Edewbtf Ajuycjb Once again, the large machine bed on this machine highlights the reliability typical of Busellato machines. The machines are characterized by stability and functional reliability. The electronics, controlled by an IBM-compatible personal computer, are equipped with a software package that is very user-friendly due to its simple programming, which uses subroutines and provides clear, understandable commands, and its high data transfer speed. All programs can be prepared separately in an IBM-compatible personal computer and then executed on the machine

Year of construction: 2018, Condition: excellent (used), EVOLUTION.JET is a highly flexible machining center both in terms of sizes customization and in terms of the number of working tables that can be fitted with equipment for manual, semi-automatic or fully automatic loading and unloading. Ideal for simultaneously machining all the various components required to assemble chairs or furniture on a single machine. Technical data Full digital NC axes N. 12 or more Interpolated linear axes N. 3+3 or more Fgjb Eduopn T Itoycob Interpolated rotating axes N. 2+2 Longitudinal X axis 3,400 mm or greater Transversal Y axis 1,300 mm Head transversal Y axis 1,000 mm Vertical Z axis 750 A axis Unlimited C axis +/- 180 Ideal for concentrating on one machine the working of different components needed for chair and furniture assembly. Technical data Full digital NC axes Nr. 12 or more Linear interpolated axis Nr. 3 + 3 or more Rotative interpolated axis Nr. 2 + 2 Longitudinal axis X 3.400 mm or more Transversal axis Y 1.300 mm Transversal head axis Y 1.000 mm Vertical axis Z 750 mm Axis A unlimited Axis C +/- 180

Condition: good (used), Year of construction: 1997, Hundegger - K1 joinery system, built in 1997, with the following equipment: - Cross feed conveyor with flat belt chains - Under-table swivel cross-cut saw, blade diameter 800 mm - 4-axis universal milling machine with finger milling cutter and dovetail cutter Combination support for vertical tools: - Drilling rig - Vertical finger milling cutter Combination support for horizontal tools: - Drilling rig - Drilling rig - Slotting set - Rear marker - Automatic edger - Various milling heads - Spare saw blades €38,000 + VAT Condition: Used, no warranty or guarantee. Assistance with dismantling is available. Available upon request. For questions, please contact us for more photos! Feb Ejwf R I Asduycegb

Condition: used, Year of construction: 2022, +++ Special price for an exhibition machine in Garbsen +++ Includes 3 days of preliminary software training in Nürtingen. Includes 4 days of commissioning/instruction, plus freight costs. +++ Subject to prior sale +++ morbidelli m90 Drilling and milling Made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Extremely powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with over 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to equip the machine according to individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate, the work table is accessible at all times thanks to the lowered machine frame. The electrical cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protection is required. The supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The extra-wide support was specifically designed to give the machine stability and ensure constant precision in all working conditions. The machine does not require anchoring to the floor. The base forms a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that withstands the greatest stresses and thus ensures superior performance and greater precision. The mobile gantry consists of a solid single piece anchored to the base and slides along prismatic guides with top-quality ball return slides. The work unit is attached to it and moves along Y and Z axes, also on prismatic guides with ball return slides. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to power transmission via a rack and pinion with helical teeth. This creates a greater tooth-to-tooth thrust, resulting in greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on the mechanical components and quieter operation. The vertical Z-axis is driven by a ball-return screw, which ensures perfect balance under dynamic loading and withstands sudden accelerations and decelerations. The main milling unit is directly coupled to the Z-axis carriage, ensuring very high-quality finishing due to the complete absence of vibration. Movement along the X-Y-Z axes is achieved by brushless motors powered by static inverters. These ensure: - Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of set-up activities when switching on the machine thanks to absolute encoders- Elimination of general maintenance activities because Fsb Eduov U Ez Deycjgb

Condition: good (used), Year of construction: 1998, Functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Fgjbot Dl U Eo Eduycsb Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: incl. installation and commissioning with production-ready handover!

Condition: used, Year of construction: 2020, Working dimension Z: 300 mm Number of milling spindles: 1 HOLZ-HER 5-axes spindle 7840: Yes Milling spindle liquid-cooled: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction HOLZ-HER Drilling aggregate 7882: Yes Cantilever machine: Yes Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 8 Positioning aid: Yes Laser setup aid: Yes Self-adjusting machine table: Yes Fgeb Edev R Ekwouycob Vacuum pump: Yes HOLZ-HER ECO-Vac: Yes Safety device: Safety mat Interface for .dxf data: Yes Pendulum machining: Yes Control: PC control Control cabinet cooling: Yes Software: HOLZ-HER CAMPUS Conformity marking: CE mark Space requirement Length: 8,95 m Space requirement Width: 4,62 m Space requirement Height: 2,86 m

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 6175 mm Measurements height 300 mm Main Drive Spindle speed range 24000 rpm Spindle motor power 15 kW Number of axis 3 Movement X-Axis Movement 6175 mm Y-Axis Movement 1900 mm Fgjbjv Rhqms Eduycob Z-Axis Movement 300 mm Tools Number of station 30 Type of tool holder HSK F63 Media Chip conveyor Yes Additional Equipment Safety devices: Laser, bumper Torque support: Yes Grooving saw: 90° pivoting Vertical drilling spindles: 17 Horizontal X drilling spindles: 2 Horizontal Y drilling spindles: 2 Liquid-cooled milling spindle: Yes Closed drag chain: Yes Handheld terminal: Yes HOMAG SaveScan: Yes This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Application Types CNC Wood Machining

Condition: used, MAKA KPF 555 CNC machining center for wood processing. Special price ex-works. Technical specifications: On demand table width: 1.300 mm table length: 6.000 mm portal height above suction cups: approx. 200 mm portal height above console: about 250 mm Fgobsvdurwo Eduycob main spindle: 8 kW

Condition: new, Year of construction: 2024, That’s a double-productive CNC laser machine. There's no magic, just two laser heads. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Two laser heads function simultaneously at a minimum distance of 130 mm apart. Each has its own 100-120W laser tube, making it possible to work at fast rates. Wattsan 1610 works with wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. Wattsan 1610 Duos LT characteristics Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1600 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1750 x 810 mm Weight: 457 kg Fjb Edjh Ucxdjuycjgb Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2023, machine/vehicle number: AA10005802, Neue Vorführmaschine!! Listenpreis: 161.363€ netto R00454 Morbidelli M100 3115x1320 Z180 inkl. C.E. Sicherheitsvorschriften OF0150 PRO-SPACE Schutzvorrichtungen 524580 Version zur Reduzierung des Platzbedarfs 524142 Klimaanlage für den Schaltschrank 630373 TECPAD kabelgebunden Fernsteuerung mit 7 Touchscreen Bildschirm 524570 Werkzeugwechsler TRB11 mit pneumatischer Fernverstellung (Ausführungen Y=1320) 524128 Werkzeugwechsler FAST14 524166 1 Vakuumpumpe, Leistung 250/300 m³/h bei 50/60 Hz OF0140 Zentraler optimierter Absaugstutzen auf hinteren Bohrkopf OF0480 Bohraggregat mit pneumatischer Vertikalpositionierung (Einzel Z-Achse) 524106 F29LTC Bohraggregat OF0141 Absaughaube für Bohraggregat 524114 Bohraggregat mit Inverter OFAB04 Druckbooster 524549 5-Achsen Aggregat Ausführung JQX 10 kW OFAB02 Absaughaube für 5-Achsen Elektrospindel OF0006 Vorrichtung zur Flüssigkeitskühlung (Lufttyp) 524208 N. 6 TV FLEX Arbeitstische 1300 524207 Lasereinrichtung für die Positionierung der Sauger 524130 Transportband zur Späne- und Resteabfuhr für X=3110mm OF0476 Abnehmbarer Späneauffangbehälter am Ende des Maschinengestells 524116 4 Vorrichtungen zur Beschickungshilfe H=75 1300 1 524150 Fester Sauger 145x145 H=75 mm 12Stk. Fgjbeqprlbo Eduycob 524151 Drehsauger 145x55 H=75 mm 6 Stk. 525250 Maestro connect: Vorbereitung ohne Gateway für nachträgliche Installation OF0438 Mensch-Maschine Oberfäche Software (HMI) MAESTRO ACTIVE OF0422 Maschinenbedienoberfläche Software Maestro cnc OF0435 Hardware-Schlüssel für Maestro cnc 630359 Zusätzlicher Hardware-Schlüssel für Maestro cnc (für USB Steckplatz) OF0543 Betriebssystem Windows 10 embedded 64 bit 630522 eye-M PRO Konsole mit integriertem PC OF0299 TELESOLVE Fernwartung via Internet OF0000 Mobile Steuereinheit mit 6,5m Kabellänge

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Fgeb Edjir Aq Tjuycob Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Rapid traverse speed: X/Y axis: 45 m/min. Z axis: 15 m/min. A/B axis: 10,000 °/min. 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Condition: used, Year of construction: 2018, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Independent Z-axes: 2 HOMAG Split-Head: Yes Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 20 Horizontal drilling spindles in X: 12 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Vertical working surface: Yes Fjb Esvg Riqoduycjgb Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Outfeed: Workpiece return Dowel insertion: Yes Glue system: PVAc Safety device: enclosed cabin Control: Homag powerTouch HOMAG - Uninterruptible power supply: Yes HOMAG Plausibility check: Yes Control cabinet cooling: Yes Software: HOMAG WOODWOP 7.1 Conformity marking: CE mark

Year of construction: 1999, Condition: ready for operation (used), Main Drive Number of axis 5 Additional Equipment Energy Chains: Various models This 5-axis MAKA FPM 470 CNC Wood Machining Centre was manufactured in 1999. Ideal for complex woodworking projects, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the MAKA FPM 470 machine we have for sale. Contact us for more information about this machine. Fgeb Eowblcajduyceb Application Types CNC Wood Machining

Condition: new, Year of construction: 2024, 1290 is a professional laser cutter for serious manufacturing. This model features a lifting table, giving you additional product options. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 LT can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. The lifting table function allows lowering the working area up to 16 mm, so the rotary device may be installed to diversify your production. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 LT characteristics Fobeiim T Aj Eduycegb Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Fob Edjh Ucrbouycegb Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. In addition, it has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. Fjb Eduyjh Ucruscegb Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. This model also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 Duos ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, This CNC laser machine has a working area of 1600x1000 mm and is intended for use by a big factory for 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Wattsan 1610 LT will push your production to new heights. The Wattsan 1610 LT has a lowering depth of 160 mm. This model operates on wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1610 LT characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1505 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1600 x 810 mm Weight: 532 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE MACHINE FOR YOUR TASK Fgebeh Ucwcs Eduycjb On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, Laser engraving machine for home use and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СO2 laser engraver is primarily intended for cutting small workpieces. Compact, trustworthy, and precise — exactly what you need. Wattsan 6040 engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 7-8 mm. It’s often used for souvenirs production, stamps, little decorations, etc. Fgeb Eeh Uc Eroduyceb You can give our managers a call for additional details! Wattsan 6040 characteristics Working area: 600x400 mm Laser power: 90-100 W Working table lowering depth: 200 mm Positioning precision: 0,03 mm Machine size: 765 x 1165 x 600 mm Packing size: 860 x 1250 x 790 mm Weight: 121 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.