Used Machining centers (vertical) X-axis travel 1700mm for sale (169)

Condition: ready for operation (used), Year of construction: 1998, Vertical machining center Hedelius BC 60 with attached C-axis Fgsbot D Rcns E Sb U Ajb year 1998 travel x/y/z : 2500/630/750mm Heidenhain TNC 426 -- all further information can be found in the pictures The machine has only machined aluminum so far! The original operating instructions are available The screen is a front-mounted flat screen, the original is no longer present Accessories: none The machine is fully functional. Only known defect: Slight inaccuracy on the angle adjustment of the C-axis. The tolerance is approx. +/- 1'. If there are tighter tolerances for the planned production, then the clamping device should be overhauled. The machine can be inspected under power. ___ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty.

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min Feb E Sb Ujtqmr Rs Ajgb measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 163123, travel distance X-axis: 3,300 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS CNC control: Siemens 840D retrofit in 2014 X-axis travel: 3,300 mm Y-axis travel: 620 mm Z-axis travel: 800 mm (only with swivel bridge removed) Table Clamping surface: 3,500 mm x 650 mm Fgob E Sbovprr Se U Aeb Clamping surface with swivel bridge removed: 1,600 mm x 650 mm Spindle Speed range up to: 10,000 /min Tool holder: ISO SK 40 Axis drives Rapid traverse: 25,000 mm/min Tool magazine Magazine type: chain magazine Number of tool positions: 60 MACHINE DETAILS Connection voltage: 400 V Mains frequency: 50 Hz Length x width x height: 7,700 mm x 3,677 mm x 3,532 mm Machine weight: approx. 17,500 kg EQUIPMENT - Chip conveyor - IKZ 40 bar - Control cabinet air conditioning - Control system retrofit in 2014 - Linear guides X-axis and Y-axis including roller guide carriage replaced in 2015 - Linear guides Z-axis including roller guide carriage replaced in 2017 - Main spindle re-bearing including all Heidenhain encoders and overhaul of the hydraulic tool clamp in 2015 - KGT X-axis in 2021 - KGT Y-axis in 2016 - KGT Z-axis in 2018 - Worm gear Fibro Plan in 2014 - A complete zero-point clamping system is also included with the machine.

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 013352, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,000 mm, table length: 3,220 mm, table load: 3,000 kg, spindle speed (max.): 5,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS x-path: 2,500 mm y-path: 1,000 mm z-path: 750 mm Table surface: 3,220 x 1,000 mm Workpiece weight: approx. 3,000 kg CNC control: HEIDENHAIN TNC 426 Spindle holder ISO: 50 Fjb E Sb Uevdagyo Aogb Milling spindle speeds: 20 - 5,000 rpm Tool changer: 30-fold Feed speed: 1 - 30,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Total power requirement: 40 kW Space requirement: approx. 6.9 x 4.1 x 3.7 m Machine weight: approx. 21 t EQUIPMENT - RENISHAW measuring probe - Coolant unit with IKZ and chip conveyor - Various tool holders

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 800 kg, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 Travel X: 6,000 mm Travel Y: 800 mm Travel Z: 600 mm Spindle mount: SK 50 Table load: 3,000 kg Workpiece weight: max. 800 kg Spindle speed: 20 - 9,000 rpm Torque: max. 165 Nm Febevxhhns E Sb U Aegb MACHINE DETAILS Main drive: 60 kW Machine weight: approx. 24 t

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 153493, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Fgjb Ejv Tmlhs Sb U Asb X-axis travel: 1,660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Control: Mazatrol 640M Rapid traverse: 30,000 mm/min Spindle Spindle mount: 7/24 taper, No. 40 Speed range: 40 - 10,000 rpm Table Table area (right/left): 2,000 mm Table area (forward/backward): 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. table load: 1,000 kg Distance spindle to table: 180 - 690 mm Table height: 750 mm EQUIPMENT - Spindle cooling

Year of construction: 1999, Condition: excellent (used), Control Siemens 840 D Fjbogmh Nks E Sb U Ajgb Travel X / Y / Z 1800/425/400 mm Tool magazine for 36 tools SK40 Spindle Speed 5,000 rpm Clamping surface 2560x450 mm Chip conveyor

Condition: good (used), Year of construction: 1998, operating hours: 16,455 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, Application by CW02/25 at the latest - submission of bids obligates timely application. TECHNICAL DETAILS Operating hours: 16,454.39 h Control system: SINUMERIK 840D Drives: SIMODRIVE 611D Working range X-axis travel: 3,000 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Spindle Spindle holder: HSK 63 Spindle speed: max. 16,000 1/min Fjb E Sbju Ni Ibe U Aogb Tool magazine Number of tool positions: 90 Internal cooling Coolant pressure: 40 bar Transportation Transport weight: 22,000 kg The machine has an oil mist separator. The machine comes with a new X-axis spindle with ball nut, newly manufactured in 2024 for €20,000

Condition: ready for operation (used), Year of construction: 2006, operating hours: 2,160 h, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 590 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Application: drilling, countersinking, reaming, thread cutting and milling of metal, aluminum, plastic and wood Fgeb E Sbovyg Ngs U Aob TECHNICAL DETAILS X-axis: 3,200 mm Y-axis: 550 mm Z-axis: 590 mm Control model: Heidenhain iTNC 530 Tool and spindle data Tool holder: SK 40 Speed range (infinitely variable): 100 - 6,000 rpm Feed and speed Rapid traverse range (X/Y/Z): 50 / 25 / 25 m/min Feed speed: 0 - 5,000 mm/min MACHINE DETAILS Machine weight: approx. 7.5 t Machine dimensions (LxWxH): 6.0 x 2.3 x 2.5 m Space requirement (LxWxH): approx. 6.0 x 4.50 x 2.9 m (30 m²) Switch-on hours: approx. 6,529 h Program running time: approx. 2,160 h Control switch-on time: 10,926 h Interface: 232-C Operating pressure: 7 bar Connection: 3x 400V / 50 Hz Total power requirement: 15 kVA EQUIPMENT - Mineral cast bed - Coolant system (300 liter container) - Position measuring system: rotary encoder / length measuring system - Drives: X-axis (50 m/min) via pinion and rack; Y and Z axis (25 m/min) via ball screw - Central lubrication (manually operated) - Control cabinet with Rittal SK 3303100 cooling unit - Heidenhain path control - Control panel with electronic handwheel - Workpiece clamping using clamping supports (approx. 15 bars) - Hydraulic tool change via control - 4x chip drawers - Various clamping devices and clamping elements - Barrier fence (safety fence) - Knut measuring device

Condition: good (used), Year of construction: 2008, Urban PF 3000 / machining center in portal design, Year of construction 2008, Heidenhain iTNC 530 control system, travel X/Y/Z 3210/695/585 mm, Machining center in portal design, Drilling capacity in ST 60 Ø 18 mm, M 16, Spindle speed up to 8,000 rpm, Fsb E Sbeu Tptcs U Ajgb SK 40, Ww 12 times, Table size 3,000 x 700 mm, chip tray, coolant system, electric handwheel, tool length measuring device,

Condition: refurbished (used), Year of construction: 2003, Functionality: limited functionality, machine/vehicle number: 1042, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 760 mm, rotational speed (max.): 300 rpm, overall weight: 26,000 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 150 mm, tool mount: 50 mm, tool weight: 15,000 g, power: 30 kW (40.79 HP), I sell a milling machine with a movable portal EDEL Koordimatic XL 4020 from 2003. Working area 4000 x 2000.Power of electro-spindle - 30 kW. ( after full regeneration ! - new bearings and clamping system ). Tool holder - SK 50.Tool storage - 36 pieces ( damaged - no exchanger arm). CNC control: FANUC 18 iM. The machine takes up little space in relation to the working area. I issue a VAT invoice. Fgjb E Sborft Scj U Asb

Year of construction: 1998, Condition: good (used), CHIRON FZ 18L 1998year Sinumerik 810 with 4 Axis Nikken Travels X 2000 mm Y 400 mm Z 425 mm Fgjb E Sjhpq U Usb U Aob table2280 x 450 mm spindle max 8000 Toolchanger ATC: 20 pos tools SK 40 weight 6,70 T manual books dimensions lenght 3,9m width 2,45m height 2,8m free loaded on truck EXW 01360 LOYETTES

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,497 h, Functionality: fully functional, machine/vehicle number: 15135302384, TECHNICAL DETAILS Control: Heidenhain type Plus IT X-path: 3000 mm Y-path: 560 mm Z-path: 720 mm Feb E Sb Ustt Dc He Asgb Spindle speed: 12000 rpm (infinitely variable) Main spindle drive power: 35 kW Table load: 3000 kg Number of T-slots: 6 / 18 H7 T-slot table: 3,400 x 600 mm) - Distance between T-slots: 100 mm Tool weight: 100 kg Tool length: 300 mm Tool diameter: 130 mm Tool holder: SK 40 Tool magazine: 40 places Rapid traverse X-axis: 100 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Internal cooling: 40 bar MACHINE DETAILS Power consumption: 60 KVA Switch-on time: 22,231 h Spindle time: 9,497 h EQUIPMENT - IKZ (internal cooling) - Belt filter (Interlit, type SPB 3/600, year of manufacture 2004) - Chip conveyor (make BMF, type KFE 63/50-450 Z60, year of manufacture 2004) - Chip trolley - Infrared measuring probe, make Heidenhain, type TS 642 - 40x tool holder SK 40 - Tool cabinet

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 16 m/min, controller model: OKUMA-OSP-HMI, table width: 850 mm, table length: 2,200 mm, table load: 2,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, spindle nose: BT 50, number of spindles: 36, number of slots in tool magazine: 36, tool length: 400 mm, tool diameter: 120 mm, tool weight: 20 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Fgeb Eeu Dinko Sb U Aeb

Condition: good (used), Year of construction: 1998, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 930 mm, travel distance Z-axis: 1,250 mm, table width: 900 mm, table length: 2,700 mm, table load: 8,000 kg, rotational speed (max.): 2,700 rpm, tool mount: 50 mm, input voltage: 380 V, position of the milling head: Pion / poziom, tank capacity: 1,200 l, Bed type milling machine in good condition, with Heidenhain 430 control. Equipped with a head working in two planes, thanks to which we obtain 5-axis work. Most Mecof milling machines sold do not have a tool magazine - here we have a magazine for 41 tools, which significantly increases work efficiency. In addition, the machine comes with an additional milling spindle with a small number of hours worked and many milling holders with tools. The machine is also equipped with internal cooling system. Electronic modules from Siemens will also be included with the machine in the event of a possible repair. The machine has been in our possession for 12 years. It was serviced by the German company 2R Dynamic GmbH. In 2022 the spindle was serviced by Mecof company, in 2023 the entire work table was replaced. Fgob E Sett Dvbsb U Aob Communication with the machine is via the RJ45 computer network - additional network card is installed. The machine is fully functional and ready for further work. Direct sales - we are not a machinery trading company. SPINDEL: Spindle rotation around the axis 360degrees indexed every every 1degree. Spindle rotation on spindle breaking 45degrees - 360 - every 3 degrees. Tool holder SK 50 Tool magazine - 41 positions. Machine equipped with Renishaw detail probe. Control: Heidenhain 430 Machine connected all the time, ready for testing.

Condition: good (used), Year of construction: 2014, table dimensions : 2000 X 900 mm axes : 1800 X 860 X 750mm spindle speed : 8 000 tours/ min spindle taper : BT50 spindle power : 18,5 KW tools magazine : 40 pockets coolant through spindle 20 bar prismatic slide guides weight : 21 t BLUM receiver systems with infrared transmission Fob E Sb Uetznlbo Aogb mist aspiration system chip conveyor, double screw + elevator isolation transformer Table extension to reach 0 with the spindle to machine plates (removable) Preparation for 4th axis. electronic handwheel

Condition: used, C 20 Screen , Keyboards , Handwheel HPX 21 , Numerical Control , CC 10 , CUR 10 , SLU 10 , TRM 10 Fgsb E Sjuzkgpsb U Aeb

Year of construction: 2014, Condition: excellent (used), Controller WIMNAX V09 (DSM) Table size 2184 x 865 mm T-slots in table 7 x 18 x 125 mm Table load max. 2268 kgs X travel 2134 mm Y travel 864 mm Z travel 762 mm Spindle speed 12000 rpm Spindle power 18 kW Tool holder type SK40 ATC magazin 40-fold Max tool dia. 74.9 mm Max tool length 300 mm Max tool weight 7 kgs Fgob E Sb Uspiaqxj Asb Rapid speeds X/Y/Z = 18, 18, 13.5 m/min Weight 17000 kgs Dimensions LxWxH = 7570 x 4450 x 3260 mm Accessories, features - Coolant device - DXF, NCPP, ISNC, Herical, rigid tapping, pocket/islands options - CTS 20 bar - Spindle cooler - Chip conveyors - Manuals Very good condition. Ready to sale immediately. The tools are not in with the machine.

Condition: excellent (used), Year of construction: 2011, X-Axis: 2032 mm Y-Axis: 660 mm Z-Axis: 610 mm spindle speed: 12.000 U/min. with internal coolant power: 18 kW tool holder: SK 40 40 places table load: 2.700 kg Feb E Sb Uemn If Ds Ajgb machine weight: 18.000 kg operating hours: 11.417 hrs spindel hours: app. 5.000 hrs. (maximum) spindle changed in year 2020 - Technical error and prior sale is reserved. -

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 2,675 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 224 mm, rapid traverse X-axis: 2,675 m/min, feed length X-axis: 2,675 mm, total height: 1,900 mm, total length: 3,600 mm, total width: 1,660 mm, overall weight: 1,400 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, 💥 FOMINDUSTRIE ADIR C CNC profile machining center for sale – top condition and used exclusively in Switzerland! 💥 We are offering a used but very well-maintained ADIR C CNC machining center from the renowned FOMINDUSTRIE brand. 🔧 Technical Highlights: 3 interpolated axes (X, Y, Z) with high-precision linear guides Worktable pneumatically rotatable in 3 positions: 0°, 90°, 180° Machining dimensions: Fsb E Sjwdmziob U Aegb ▫️ X = 2675 mm ▫️ Y = 355 mm ▫️ Z = 224 mm Spindle motor: 3 kW, ISO 30, 1000–12000 rpm 6-position tool changer (manual) Pneumatic clamping devices: 4, movable along the worktable Integrated PC with 15" touchscreen and FOMCAM software Drip-type fine lubrication, central lubrication system ready CE-compliant, extremely safe thanks to full enclosure and integrated safety devices 🧰 Included in delivery: Touch pen Tool set, USB with FOMCAM license Cone holder, coolant tank, central control Chip collection tray, transport feet, operator's manual 📏 Dimensions & Weight: L: 3600 mm × W: 1660 mm × H: 1900 mm Weight: approx. 1400 kg ✅ Condition: The machine was used exclusively in Switzerland and is in very good and well-maintained condition. It has been regularly serviced and is ready for immediate use. 📍 Location: Stara Zagora 📦 Transport can be arranged 💬 Price upon request

Condition: excellent (used), nominal power (apparent): 12 kVA, controller manufacturer: FIDIA M30, Type 5 axes Table 3,500 x 1,500 x 300 X-axis travel 3,000 mm Y-axis travel 1,000 mm Z-axis travel 800 mm B-axis travel ± 110 º C-axis travel ± 361 º Head RPM 28,000 rpm FIDIA M30 control Motor power 12 Kw Tool HSK 50 E Electronic handwheel Yes Machine dimensions (width x length x height) 4,900 x 4,000 x 3,500 Weight 12,000 Kg FIDIA digit 318 M5A/03 milling machine Fob E Sjvvvz Djb U Aogb

Condition: good (used), Year of construction: 2018, operating hours: 17,740 h, Functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: ITNC 640, total height: 2,700 mm, total length: 4,500 mm, total width: 3,500 mm, table width: 700 mm, table length: 2,100 mm, rotary table diameter: 750 mm, overall weight: 13,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 6,003 h, coolant supply: 10 bar, spindle motor power: 35,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, The DMG Mori DMF 180/7 is a high-performance, precision 5-axis milling machine designed for complex machining tasks in industrial environments. It is an excellent choice for operations that require exceptional accuracy and versatility. The DMF 180/7 model features a large working area, enabling the machining of larger workpieces while maintaining the machine's stability and precise machining results. Fjb Esv Dumzs Sb U Aogb This machine is in excellent condition and lightly used, ensuring reliability and a long service life. The DMF 180/7 provides superior quality machining with its automatic tool changer system, precision linear guides, and dynamic tool positioning, minimizing errors and increasing production speed. With its 30-tool capacity magazine, this machine is particularly advantageous for operations that require multiple tools, reducing tool change time and improving manufacturing efficiency. It also features a maximum spindle speed of 20,000 rpm, 40 meters per minute rapid traverse, and simultaneous 5-axis machining, enabling high-speed, precise, and complex machining. Additionally, the machine comes with several advanced options: - 3D Quickset option, which provides quick setup and more accurate operation. - Rotary table load capacity of 500 kg, allowing for stable machining of larger and heavier workpieces. - Vertical table load capacity of 1500 kg, ensuring handling of larger workpieces. - Blow-off gun, helping to keep the workpiece clean and maintain precise machining. - Heidenhain TS649 probe, offering high precision during measurement and setup. - Electronic handwheel, improving the machine's operability and enabling more precise movements. The DMG Mori DMF 180/7 is an ideal choice for those in various industries, including automotive, aerospace, medical, and energy sectors, who need to take advantage of advanced 5-axis machining capabilities. Key Features: - Simultaneous 5-axis machining with a large working area - Exceptional precision and stable performance - Automatic tool changer system for fast and efficient operation - 30-tool capacity magazine, allowing the use of multiple tools for continuous, efficient machining - Maximum spindle speed of 20,000 rpm for high-speed, precise machining - 40 meters per minute rapid traverse for quick movements and reduced cycle times - 3D Quickset option for quick and accurate setup - Rotary table load capacity of 500 kg and vertical table load capacity of 1500 kg - Blow-off gun for cleaning and maintaining precision - Heidenhain TS649 probe for high-precision measurement - Electronic handwheel for precise movements - Low maintenance requirements due to its lightly used condition - Ergonomic and user-friendly control for increased workflow efficiency -The spindle runtime is only 6003 hours -The total runtime of the machine is below 18000 hours Feel free to ask for videos of the machine and the spindle running! This milling machine is the ideal solution for modern manufacturing companies seeking high levels of precision and productivity.

Year of construction: 2002, Condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Fjb E Ssgb Rq Ssb U Asgb Späneförderer , Bandfilteranlage

Condition: excellent (used), Year of construction: 2015, operating hours: 4,267 h, Functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 35 kVA, torque: 118 Nm, controller model: fanuc, DOOSAN DNM 500II options Coolant though spindle 20Bar Touch probe Heidenhain 12.000 rpm High speed option Data server 1GB Ethernet connection 4th axis preparation Fjb E Sb Ust N Rirs Asgb Tool load monitoring

Condition: new, High quality components used in this machining centre ensure reliable, long-term operation. This machine is efficient in many activities such as milling, drilling, threading and reaming while preserving high accuracy of operation. Every device of this series is equipped with an efficient cooling system, providing optimal machining conditions. Fgob E Sborh Er Ue U Asb Description Highest quality guides for each and every axis 4-truck guide system implemented into the bed of the machine for a heavy load capacity Rigid body of the machine with spaced out, tempered and ground rectangular guides Hermetic chamber provides work safety Maximum precision due to lead screws in 3 axes Technical data A choice of control system SIEMENS 808 ADVANCED Table dimensions 2200×820 mm T-slots 5×22×135 mm Table load capacity 960 kg X/Y/Z axes 2000×800×700 mm Distance from spindle to table surface 200–900 mm Distance from spindle to column 830 mm Spindle taper BT50 Spindle speed 100–8000 rpm Spindle drive Belt Spindle motor 11 kW X/Y/Z engine axes 22/22/22 Nm X/Y/Z ball screws (diameter x stroke) 40×08/40×08/40×08 mm X/Y/Z quick feed speed 15/15/12 m/min X/Y/Z incision feed 8 m/min Magazine capacity BT50–24 Maximum length of tool 300 mm Maximum weight of tool 7.5 kg Power supply 25 KVA Air pressure 5–7 kilogram-force/cm2 Positioning accuracy +/– 0.01 mm Dimension 5420×2800×2810 mm Weight 14000 kg