Condition: refurbished (used), Numerical Control Type Power Control Software No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) Fpolragjvhcbzok Iog No. 2 Drilling heads for each horizontal unit (1 x Kw 1,5) No. 11 Splindles for each horizontal drilling head Max. working width (mm) 3000 Min. working width (mm) 250 No. 6 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the top vertical supports No. 6 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 50 / 60 (ca.)

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale. Foljvl Eyneragk Ispg

Condition: used, Year of construction: 1996, 1996 Comec FO/OM Horizontal, vertical and head drilling machine, Double Fslouqbh Ujragk Iepg - 2 horizontal heads - 2 vertical heads - 1 head of the head

Year of construction: 1980, Condition: used, - Manufacturer Prieß and Horstmann Fpolragj Nh E Iok Ijg - Type BAT II - working length (mm): 1800 - drilling units: 2 with 3 drills each - press-in device: for pot-hole hinges - Drilling units: 2 for hinges etc.

Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, Drilling depth 130 mm Drilling width 300 mm Two-jaw drill chuck 2-20 mm Table size 800x200 mm Foot switch for clamping cylinder (pneumatic) Height and depth limitation pneumatic Hand feed lever with on and off switch Stops for long hole drilling Raster shaft Main switch with motor protection and CCE plug Chassis Fjlrjvt Smqjagk Iopg Drilling in 2 levels with one clamping

Condition: good (used), Year of construction: 1990, Brandt dowel boring machine Type: DB 25 P 25 drilling spindles in 32 mm pitch Drill beam pneumatically swiveling Drill beam positions bottom/rear Locking at 45° / >45° possible with clamping shoe Clamping height up to 120 mm possible Drilling height above table up to 50 mm Motor power 1.5 kW Drilling depths 0 - 95 mm Table height 905 mm Spindle speed 2800 rpm Drill shank diameter 10 mm 2 stops and 3 hold-down devices Fpslragsua Au Hjk Iog IMMEDIATELY AVAILABLE

Condition: excellent (used), Numerical Control Type Power Control Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports Fpolragkoivawpo Ijg No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: used, machine/vehicle number: 007683, Max. panel width: 3200 mm Max. panel length: 900 mm No of Bottom Units: 5 No of Top Units: 3 Positioning of Units by NC: yes Fpjlragevxxu Ssk Ijg Lateral horizontal groups: yes

Year of construction: 1991, Condition: used, machine/vehicle number: 9105/4452, Double end automatic operation, for straight, right-angled workpieces Stock dimensions Stock length 220 - 2500 mm Stock width 15 - 200 mm Felsit T H Ssragk Ijpg Stock thickness 15 - 50 mm Double-sided trim saw: The saws are cutting downwards through the clamped workpiece.Each side 1 sawing unit. Horizontal drilling station: each side 1 drilling unit with 1 drilling motor 2 kW Distribution of vertical drilling units: 3 units at the front of the overhead beam 2 units at the back of the overhead beam Workpiece centre support: With stop and back stop Edge drilling unit: Each Side 1 support with height adjustment Distance from edge max 250 mm.

Year of construction: 1991, Condition: good (used), - Working width (mm): 900 - number of drilling spindles: 27 - pitch (mm): 32 Felraog Um Ekjgk Iopg - drilling unit: swivelling - motor power (kW): 1,9 - Required space L x W x H (mm): 1120 x 900 x 1150 - weight (kg): 550

Condition: excellent (used), Cup band forming machine with press-in device Fpelragkot Tbuts Iog Pneumatic clamps Foot pedal, stop rail and stand Some drills included

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Fpjlovxr Rasragk Ijg

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: KZ0040) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer Fpjlragkoh Icm Us Ijg KZ0041) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - N° 7 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - N° 4 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - N° 5 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC NC 500 (Software Tooling System + Woodmaster) KZ0042) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 5 top pressing devices + N° 2 endless screws to evacuate the wastes. KZ0043) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. KZ0044) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Year of construction: 2009, Condition: good (used), Drilling width max. 250 mm, Fpslragjpiqh Dek Ijg Drilling depth max. 170 mm, Drilling height max. 170 mm, motor 2,2 kW, incl. quick stroke system with scale and 2 height stops, depth stop with scale, 2 eccentric clamps, plug-in fence 90°, longitudinal stop 1000 mm, Dowel hole drilling device with cable control, weight approx. 190 kg. ex location Seevetal, subject to prior sale, without transport, as viewed

Year of construction: 1998, Condition: used, machine/vehicle number: 9803/5823, The second-hand drilling and dowel insertion machine is equipped with 2 separate working fields. One workpiece can be processed while the next piece is loaded. The boring and dowel driving pattern is processed on point-to-point-basis. Dowel diameter: 8 x 30 mm Stock length: min. 90 mm Stock width: up to 2x 1,100 mm Stock thickness: 14-40 mm EQUIPEMNT 1 x horizontal drilling station 1 x glue injecting and dowel insertion station type 34 Electronic Glue Control ELC 1 x vibrator hopper convejor 1 x glue pump 1:1 Central lubrication Workpiece support table 1,250 mm 4 x stock clamping system for horizontal and vertical drilling Vertical drilling: Workpiece in upright positiont Stock length: min. 320 mm Stock width: max. 600 mm Stock thickness: 10-36 mm 1 center stop with 2 sensors removeable for both workpieces 2 x workpiece support 550 mm deep (Y) retractable right and left NC-positioning of height adjustment of the drilling and dowel insertion station (Z-axis) Electric supply 400 V, 50 Hzs, 3 phases Fjlogkwqqoragk Iepg KOCH Numeric with 1 NC-axis (X)

Condition: new, - Conveyor belt / chip conveyor belt for dowel drilling machine Nottmeyer or similar. - Length (mm): approx. 7520 - Width (mm): approx. 770 Fslragoguak Aek Iepg

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 Fpolroidqd Tsagk Ieg The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the "new" own brand of the company: HoKuTech GmbH & Co. KG --- Houfek long hole drilling machine LLB VD 20 R Motor 1.5/1.9 kW, Transverse displacement in Y-axis 250 mm, Displacement in longitudinal direction X 340 mm, Folragjrxcylok Ispg Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately available from stock Seevetal, Subject to prior sale,

Year of construction: 1986, Condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction Folj Drmxsragk Ispg

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Fslraoidqf Rjgk Ispg Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Year of construction: 1992, Condition: good (used), - Drill head: 21 spindles - Glue guns: 6 Folrajrcfijgk Ispg

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) Folraehvagkegk Iopg - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), BATCH-SIZE ONE - FULL CNC Flexible LINE for Drilling, Routering and hardware Inserting process, for the Front doors (of furniture). With Numerical Control NST panle PC W2k (FERRO CAN BUS) Composed by: Folsnvfrpjragk Ijpg A) WORKPIECES LOADING SYSTEM (Infeeding Hedgehog Buffer) B) FLEXIBLE DRILLING-INSERTING MACHINE Mod. BAT-RTW-CNC With 4 working stations: - Station No. 1: Workpieces (panels) in-feed and positioning - Station No. 2: Drilling and routering - Station No. 3: Inserting (hinges, adapters and shock absorbers) - Station No. 4: Workpieces (panels) release and out-feed C) WORKPIECES UNLOADING SYSTEM (Outfeeding Hedgehog Buffer) To process panels with following dimensions: - LENGTH: MIN mm (194) 270 - MAX mm 1450 (1500) - WIDTH: MIN mm 130 (120) - MAX mm 700 - THICKNESS: MIN mm 13 - MAX mm 40

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Fpolrehvi Dujagk Ieg The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: Folredfgg Ijagk Ijpg A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader