Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Hjdpfxew T U Uze Agwspa Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Mobile paint mist extraction unit Hsdpfx Agetk H Nyewjpa With side air baffles Built-in fan

Condition: used, Year of construction: 2015, Suction nozzle diameter: 300 mm Rated air flow: 5087 m³/h Air flow monitoring: differential pressure indicator Filter area: 32 m² Residual dust content: less than 0.1 mg/m³ Chip sack volume: 4 x 131.5 l Filter cleaning: pneumatic Motor power: 7.5 kW Extinguishing system: yes Machine length: 3689 mm Hpsdpfx Aox Eltgsgwea Machine width: 1590 mm Machine height: 2555 mm Weight: 967 kg

Condition: excellent (used), Year of construction: 1996, Extraction System Manufacturer: Höcker-Polytechnik Hsdpfjxz Ayaox Agwopa Model: EA 160 Year of manufacture: 1996 Extraction nozzle diameter: 160 mm Power: 2.2 kW Volumetric flow rate: 2,050 m³/h Vacuum: 2,580 Pa Cleaning: Automatic-mechanical Weight: approx. 320 kg

Condition: good (used), Code: 0264 Brand: VENTILAZIONE MAPELLI Model: GM 36 PLUS - CE Standard Vacuum system with 4 collection bag complete with 36 filter bags - Motor 25 Hp Technical data: Filtering group for four-gathering-sack-suction line with 36 filter bags Hpjdpfx Agox Hin Dowea Filter composed of: one upper filtering room made of painted 15/10 zinc-coated steel panels with one access door with 36 cotton bags designed for the air flow speed of 0,03 m/s, one electromechanical sleeve-shaker vibrator, one roof and stainless steel decorative profiles, one anti-bursting ATEX panel. One lower tank with tube plate, 4 supporting legs of painted zinc-coated steel, four hoppers, which channel waste material toward the gathering-sacks. One centrifugal fan with one motor Hp 25 (Kw 18,5), one air discharge tube of stainless steel with analysis outlet and one pressure differential cut-out to test the efficiency of the filtering room

Condition: used, Year of construction: 2017, total height: 3,000 mm, total width: 1,000 mm, total length: 3,350 mm, Empty weight: 1.000 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 1313000055R - Capacity [m³/h]: 6000 - Number of filter bags [pcs]: 45 - Filter length [mm]: 1860 - Filter diameter [mm]: 200 - Filter surface area [m²]: 55 - Connection diameter [mm]: 310 - Main fan [pcs]: 1 - Main fan power [kW]: 5.5 - Briquetting press present: Yes - Collection bins: Yes Hpodpjxixfbjfx Agwea - Number of bins/bags [pcs]: 2 - Transport dimensions: 3350mm x 1000mm x 3000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Hjdpfxjhk S Sto Agwepa Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: used, functionality: fully functional, Lammers fan, 5.5 kW, with 4 bag discharge filters. Available from the end of September! Hpedsw E Iqzopfx Agwsa

Condition: used, Year of construction: 1997, intake connection: 200mm Maximum volume flow: 3200 m³/h nominal volume flow: 2862 m³/h volume flow: Differential pressure indicator Vacuum: 2336 pa filter area: 16,8 m² Hodpfx Aox Edmvogwspa Residual dust content: smaller 0,2 mg/m³ SPL: db chip bag volume: l filter regeneration: pneumatic motor power: 4 kW machine length: 2300 mm machine width: 900 mm machine height: 2200 mm weight: 350 kg

Condition: used, mobile extraction unit with filter bag on top extraction nozzle 140 mm motor 400 V 1.1 kW Hpedpfx Agjxnffljwea Availability: short-term Stock location: Flörsheim

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Motor output 5,5 kW Hpodpoxzuxnofx Agwja Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Condition: used, 1 unit extraction system HOLZMANN ABS 3000SE 1500 Watts, 400 V, 50 Hz Manufacturer: HOLZMANN Model: ABS 3000SE Weight: 45 kg Colour: grey/red Dimensions: 100x55x107 cm Application area: production hall Hedpfx Agjx A A Hiswjpa Condition: used

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit Hpsdpfxjhk S Swj Agwsa without suction hose

Condition: good (used), Year of construction: 1990, functionality: fully functional, Extraction system/bag filter, type 244300 NAsf 4/3, year of manufacture 1990, equipped with new fan blades. Fan is flange-mounted, filter area approx. 26 m², with 4 bags. 3 kW. Machine subject to differential VAT. Hsdpfx Asxf H Ayogwepa

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Hpjdpfex Edmpsx Agwoa Machine height: 2200 mm Weight:

Condition: as good as new (ex-display), Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Hjdpfxsvwflno Agwjpa

Condition: new, Year of construction: 2025, extraction capacity ~ 8900 m3/h engine power 7.5 kW rotation speed 3000 rpm/m rated voltage 400 V, 50 Hz Hpedpfx Agev Dvbaewea extraction nozzle 300/200 mm extraction speed 28 m/sec. number of filters 45 filter category G filter material polyester noise level 80 dB without connection / 65 dB when connected via pipe to the machine filter surface 22 m2 dimensions 920 x 2260 x 2250 mm weight 450 kg negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Traction Filter cleaning by vibration system with control + 850 euros for model with fire extinguishing system (Safe System) + 550 euros for model with inverter (speed regulation)

Condition: excellent (used), - Total air flow rate: 70.000 m3 /h - 610 m2 (squared meters of total developed filtering surface/area) - No. 540 filtering bags (each diameter mm 120 x length mm 3000) - Average speed of the air in the filter: 1,86 m / sec Hedpfoh Icn Sox Agwopa - Electro-Fan type TRMV 1401 diam 1000, power KW 132 (HP 176)

Condition: good (used), Year of construction: 2000, Gebr. Esta Dustomat 62 Suction nozzle Ø: 160 mm Main motor: 3 kW Item description: mobile, CE mark, 3 KW, Ø=160 mm, Filter cleaning mobile separation container, Hedpsvk Drtjfx Agwepa Nominal volume flow 1,850 m³ / h Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), O04018) No. 1 FILTER (Suction sub-station) - Total air flow 18,000 m3/h (estimated) _____ O04019) N° 1 FILTER (Suction Sub-stations) - Total air flow 50,000 m3/h (estimated) - Power KW approx. 90 Hsdpswrdw Rofx Agwepa _____ O04020) N° 1 FILTER (Suction sub-stations) - Total air flow 45,000 m3/h (estimated) - Power KW 30 approx. _____ O04021) No. 1 FILTER (Suction sub-stations) - Total air flow 45,000 m3/h (estimated) - Power KW 55 - No. 360 filter bags (each diameter mm 123 x mm 3000 H) _____ O04022) N° 1 FILTER (Suction sub-stations) - Total air flow 36,000 m3/h (estimated) - Power KW 55 - No. 360 filter bags (each with a diameter of 123 mm x 3000 H) _____ O04023) N° 1 FILTER (Suction sub-stations) - Total air flow ????? m3/h (estimated) - Power KW 30 - No. 180 filter bags (each with a diameter of 123 mm x 3000 H)

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft Hpodjv Sk Tmopfx Agwsa DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Hpedehkzttjpfx Agwea Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Hsdpscdr E Aofx Agwspa Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm - nominal motor power: 2,9 kW; 400 V/50 Hz - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa Hpodpfxsbpg Ncs Agwoa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 - weight: 320 kg - Execution / operating side alternatively right / left Location ex stock Bitburg Top price for the exhibition piece

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg Hsdpfxjfc A Uro Agwepa