Used other extractors & exhaust units for sale (27)

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". YOUR ADVANTAGES Accessible from 4 sides Can be loaded with up to 150 kg Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm Dsdpodqzhbofx Anzokr 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Dksdpeu R Tb Ujfx Anzer Connection piece: 350 mm, Spigots: 5 pieces, nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Dkodpfx Ansu R S Uyozer Connection piece: 300 mm, Nozzle: 5 pieces, nozzle diameter: 160 mm

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please provide your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap Dkodpfx Aneftb Ebezsr - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hoods, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry. Below, you can select the cyclone with the appropriate size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Condition: new, galvanized sheet metal dust collection trays Djdpfx Anoh Ucqtszjkr fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Mechanical cleaning of filter bags Dsdpfszi Rkcox Anzokr Return channel for cleaned air

Condition: used, Table dimensions 1250 x 750 mm Dedpfxsxcp Nwo Anzokr

Condition: new, Year of construction: 2024, functionality: fully functional, Extraction table without rear panel/side panels Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including energy bar) Power strip with tool tray: Dedpfx Ajuzf Ihsnzokr 2x 230 V socket with hinged cover, 2x compressed air couplings, mains cable and main switch Extraction nozzle Ø 160 mm, with shelf

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Weight 320 kg Djdpfxjvz Ei Ie Anzskr Total power requirement 22 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 890x1081x830 mm Weight 268 kg Total power requirement 15 kw Dkodovz Emaopfx Anzjr

Year of construction: 2025, condition: new, Dimensions (L/W/H) 740x630x1028 mm Weight 60 kg Total power requirement 3 kw Dkjdpfx Aovz Endjnzor

Year of construction: 2025, condition: new, Dimensions (L/W/H) 910x1200x850 mm Dkodpfx Ajvz Exvsnzor Weight 400 kg Total power requirement 18,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 690x771x790 mm Weight 130 kg Dkjdpfevz Enwjx Anzjr Total power requirement 5,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Dksdpfxsvz E Dls Anzsr Weight 250 kg Total power requirement 7,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 880x1037x820 mm Weight 188 kg Total power requirement 11 kw Dedovz Ew Espfx Anzjkr

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1510x1250x1400 mm Weight 600 kg Total power requirement 30 kw Dkjdpevz Enqefx Anzer

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Dodpfx Ansyg Nu Nszjkr

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Dedpfx Aex Upqhonzokr Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm Dkedpfx Ajfyadbonzor - Weight approx. 73 kg

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m Dkedpfx Aexa Eu Rsnzsr - Clearance height: 4.8 m - Volume: approx. 140 m³ - Shell height: 9 m - Shell diameter: 4.5 m - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Year of construction: 2025, condition: new, Engine power 3,75 kW / 5 Ps Power supply 400V Type of the engine 3-phase Frequency 50 Hz Engine rotation speed 2850 r/min. Ventilator diameter 350 mm Diameter of the input suction tube 300 mm Air flow 8900 m3/h Max. static pressure 1493 Pa Dksdpfx Aneglf Dnozjr Sizes of the mail filters Ø61*140 cm x 2 pcs / Ø61*140 x 4 x 2 pcs Sizes of the aspiration system 3395x775x2864 mm Weight 138 kg

Year of construction: 2001, condition: excellent (used), Features a rake. Djdehqb Swjpfx Anzekr Capacity: 1755 m3/h 1 compartment Dimensions: Height: 260 cm Width: 85 cm Length: 110 cm Inlet diameter: 160 mm

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Dkedjftdv Uopfx Anzer Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Dimensions [mm]: 1660 x 1020 Dkedpsy Agp Djfx Anzer Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: ready for operation (used), Year of construction: 2012, Schuko Type Octopus 30 Ø Connection: 200 mm Required air volume: 3,000 m³/h Required negative pressure: 1,100 Pa Table length: 3,280 mm Table width: 1,000 mm Dodpoyz St Esfx Anzskr Table height adjustable from 700 to 1,000 mm Max. sound pressure level: 63 dB(A) Weight: 200 kg Year of manufacture: 2012