Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *Available upon request Combination of: mütek MPP 60 briquetting press + MMJET 350 dust extractor *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical specifications for the briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low error rates + 25 years of experience, ongoing development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Maximum briquette stroke: 40 mm Optional briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Floor area of entire system: 2.2 x 1.1 x 2.8 m L x W x H Height - 2.8 m (special container) Delivery also possible in two components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Cooling option for crimping tongs: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant 2. Technical specifications for the MMJET 350 clean air extraction unit: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content: 0.1 mg/m³ Max. flow rate: 8000 m³/h Fgsb E Iied Su Hxohgeb Nominal flow rate (20 m/s): 6950 m³/h Filter area: 71 m² Negative pressure: 2630 Pa Automatic filter cleaning Cartridge filter Jet cleaning Powder fire extinguisher installed (inspected every 2 years by a specialist company) Raw material requirements: - The moisture content (dry) must be between a minimum of 6 and a maximum of 18% - Compressed air provided by the customer - Maximum chip length 15 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The customer must select a press large enough to remove more material than is sucked in at peaks. - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: like new (used), Year of construction: 2020, Spänex SMU-R15 mobile extractor Built in 2020, unused 140mmØ extraction nozzle, 1500 air flow 2100 Pa negative pressure, 65 dB, H3 tested 165L drum, dimensions: 1320mm long, 750mm wide, 1905mm high Weight: 345kg Fgob E Iiswanf Ujhgsb

Condition: used, Year of construction: 2002, Extraction diameter: 160 mm Nominal flow rate: 2050 m³/h Motor power: 3.0/0.18 kW Nominal speed: 3000/1000 rpm Weight: approx. 310 kg Fgob E Iihewgnucsgjb Storage location: Supplier

Condition: used, Year of construction: 2009, machine/vehicle number: 20259, Central extraction of woodworking machines Dust characteristics: dust and shavings Material throughput: not known Operating mode: shaker cleaning Explosion dust class: St 1 Volume flow: 40,000 m³/h Sound requirements: approx. 65 db(A) Disposal method: open Clean air ducting: air recirculation Residual dust content: <0.1 mg/m³ based on dust 1 unit lock filter RTF-DWS-300 Filter area: approx. 300 m²- Year of construction: 2009 - filter bag diameter: 200 mm - cleaning with vibration motors - Filter housing made of galvanized steel S = 3mm - Pressure resistance with static proof - Inspection door, access ladder, standing platform according to DIN - Tested pressure relief surfaces - Material hopper with internal large-sized screw conveyor incl. gear motor - Raw gas section as large expansion chamber - Exhaust air connection according to local requirements - Filter underframe made of welded steel construction, hot-dip galvanized - Incl. dry extinguishing line and pressure monitor - Weight: 6,600 kg Fjb E Iiovv Uf Ijhgsgb 1 pc. Rotary valve RTZ 5050 - Inlet 500x500; outlet 500x350 - Motor power: 0.75 kW - Speed: 12 rpm 4 pcs. clean air fans - Air flow: 10,000 m³/h per fan - Total air flow 40,000 m³/h - Total pressure increase: 3,190 Pa 1 pc. duct components for air recirculation - incl. galvanized ducts - turns - silencer - fire protection flap 1 pc switch cabinet Dust-tight sheet steel standard enclosure. Switch cabinet as wall cabinet, built and completely wired, according to VDE regulations 0100, 0113 and DIN 57113. The scope of delivery includes all components required for controlcomponents and the circuit diagrams. Configuredd for:· - Control of cleaning · Control of fans · Control of fan and machine start-up · Pressure monitoring indicator light · Control of shut-off valve · Control of rotary valve · Operating light display and 0 switch Assembly dimensions: - Length: 4,628 mm - Width: approx. 2,000 mm - Height: 8,582 mm _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 1995, Used system Year of construction: 1995 Technical specifications: Nominal flow rate: 9380 m³/h Filter area: 46.9 m² Weight: 880 kg Nominal negative pressure: 3000 Pa Max. h: 8.5 bar Including piping Including return air Location: Baden-Württemberg Availability: Upon request Fgob Eewb Ei Ts Iihgsb !Sold on behalf of the customer!

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: chip extraction fan -Engine: Lammers Type DK 200L-4 -Engine power: 30 kW / 1465 rpm -Fan wheel: Ø 840 x 210 mm -Inlet connection: Ø 500 mm -Connection output: Ø 500 mm -Base plate: 1600 x 910 mm -Dimensions total: 1760/1340/H1610 mm Fgsb Ejv Rvvwo Iihgob -Weight: 900 kg

Condition: ready for operation (used), Suction capacity (max.) - 1500m3/h Negative pressure - 1450Pa Filter surface - 1.5 m2 Volume of waste bags - 120l Connection diameter - 125mm Power supply - 400V Motor power - 1.1 kW Noise level - 78 dB Weight - 40kg Height - 2080 mm Width - 480 mm Length - 950 mm Fob E Iewhdprjihgsgb

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. Fsb Eedf S Szs Iihgsgb The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,800 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2022, Extractor nozzle diameter: 300 mm with pneumatic filter cleaning. Maximum flow: 7880 m³/h. Motor speed: 2905 rpm. Nominal flow: 5100 m³/h (20 m/s). Negative pressure at nominal flow: 3090 Pa. Weight: 750 kg. Back-up fuse: 32 A. Storage location: Nattheim Fgjbev T Iibs E Iihgob

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 8106275, The Vacomat 300 XP large dust extractor is the ideal dust extraction system for multi-machine extraction. Air volumes of up to 6,000 m³/h can be conveyed with this clean air extraction system, which also makes it interesting for CNC processing or wide-belt sanding machines. The Vacomat 300 XP is equipped with an automatic control system as standard to ensure that the powerful extraction system is not forgotten or left idle. When a connected machine is switched on, the dust extractor fan starts automatically so that extraction begins immediately. Our Vacomat 300 XP is manufactured according to the modular principle. As standard, the dust and chip mixture is discharged into four dust-tight chip collection garbage cans (4 x 120 l) with inserted, sturdy plastic bags. A vacuum channel holds the plastic bags securely in the collection container. Viewing windows make it easier to check their fill level. It can also be discharged via chip containers, ATEX rotary valves and screw conveyors for disposal in a briquetting press, BigBags, a container or chip bunker. Feb Ejt Nfale Iihgogb The filter bags are cleaned automatically after all connected processing machines have been switched off. Our patented filter shaker cleans the filter bags pneumatically/mechanically. Dust and chips are gently knocked out via the compressed air connection using a type of "shaking". As an option, especially recommended for very high and particularly fine dust content, an efficient pressure surge cleaning system is available (ATTENTION: overall height then +100 mm and length +350 mm). Cleaning via the compressed air tank takes place offline, after extraction operation.

Condition: used, Year of construction: 2018, Used dust extractor Year of construction 2018 H 3 certified Cleaning with vibration with automatic start (potential-free contact) Suction nozzle diameter 140 mm (160 mm when removing the nozzle) Motor power 2.2 kW Filter area approx. 7 m² Nominal volume flow approx. 1100 m³/h at 140 mm Nominal volume flow approx. 1900 m³/h at 160 mm Max. volume flow 1900 m³/h Fjbju Dcw Ee E Iihgsgb Negative pressure approx. 2800 pa Collecting volume approx. 175 l max. Sound pressure level 73 dB(A) Dimensions: LxWxH 1418 x 1012 x 1990 mm Weight approx. 350 kg PLC control with automatic start and text display LxWxH 1258 x 1012 x 1990 mm Availability: by arrangement Storage location: Baden-Württemberg

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 8584 m³/h -Total pressure: 4035 Pa -Engine: 15 kW 1460 rpm -Connection input: Ø 300 mm -Connection output: 250 x 400 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø760 x 200 mm -Dimensions: 570/1000/H1470 mm Fgebsv Rf Hlj E Iihgob -Weight: 381 kg

Condition: reconditioned (used), Year of construction: 2002, Maximum volume approx. 5050 cbm/h Suction nozzle diameter = 250 mm Motor power: 5.5 kW Filter area approx. 25.20 m² External dimensions L x W x H approx. 3350 x 1020 x 2300 mm Weight approx. 750 kg Minimum flow rate 3530 m³/h Feb E Iihjwbfg Sogsgb Negative pressure approx. 2500 PA The filters have been cleaned and the system has been resealed! Condition: very good All information is provided without guarantee. This information was taken from a brochure. This sale is on behalf of the customer.

Condition: used, CATALOGUE NUMBER 7583 TECHNICAL DATA - extraction capacity approx. 3300 m3/h - 2.2kW motor - 380V voltage - number of bags 2pcs - chip bag diameter 630mm - chip bag length 1150mm - hose connector 4x125mm - shipping dimensions L/W/H 1950x1100x1420mm - total dimensions L/W/H 1950x1100x2550mm Feb E Iiev Iyt Uohgjgb - weight 100kg ADVANTAGES - Polish production - mobile machine - used, unpainted extractor - very good condition Net price: PLN 3300 Net price: EUR 770 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1988, Paint mist disposal used Fgjb E Iihekwhpzsgeb Year of manufacture 1988 mobile complete with accessories as on the picture Verfügbarkleit: short term storage place: Röllbach

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm Feb Eov Ni Uwo Iihgsgb -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg

Condition: new, Catalog number x0192 TECHNICAL DATA max efficiency 14600m3/h max compressed air 4500Pa engine 15kW number of revolutions 2800rpm metal rotor 6 blades diameter of exhaust nozzle 325mm Fgsb E Iisq U R H Ujhgob dimensions length/width/height 900/880/1050mm weight 265kg – new device Possibility to purchase a reduction nozzle for an additional fee. Net price: PLN 9850 Net price: EUR 2320 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2020, Used suction unit Year of construction 2020 not dust-tested For milling, planing and sawdust High-quality, stable chassis for easy maneuvering Double-woven fine filter bag For milling, planing and sawdust (not suitable for dust) Extraction unit can be rotated through 180° to allow extraction from below or above Sturdy metal fan wheel High-quality chassis as standard for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Double-woven fine filter bag Scope of delivery: Two filter bags, two chip bags Fgjb E Isr H Rlkeihgeb Nominal volume flow2800 m³/h Negative pressure max.1900 Pa Filter area2 x 1.92 m² Chip collection volume2 x 120 l Nominal width external suction nozzle inlet203 mm Nominal width external extraction connection outlet1 x 100, 2 x 120 mm Idle speed2950 min¯¹ PU1 Dimensions and weights Length approx.1500 mm Width/depth approx.500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Input power2.2 kW Supply voltage400 V Mains frequency50 Hz Noise emission Sound pressure level max.87.5 dB(A) Availability: short term Storage location: Röllbach

Condition: excellent (used), Catalogue number: 7533 TECHNICAL DATA max efficiency 14600m3/h max compressed air 4150Pa engine 15kW number of revolutions 2940rpm metal rotor 7 blades inlet diameter 325mm outlet diameter 320mm dimensions length/width/height 1140x930x1480mm Fob E Iiovtmcashgogb weight 340kg – Polish production – outlet connector included – used fan, very good condition Net price: PLN 6900 Net price: EUR 1620 Net price calculated according to the exchange rate of PLN 4.25/EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, Used suction unit mobile Suction nozzle 120 mm motor 0,75 kW Fgjb Esrw Dwze Iihgeb 1180 pa Availability: approx. end of May/beginning of June Storage location: Aschaffenburg

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. 8900m3/h engine power 7.5kW Fgeb E Iodgud Asihgeb rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm weight 500kg Net price: PLN 18,500 Net price: EUR 4,460 Net price calculated according to the exchange rate of PLN 4.15/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 1995, Used machine Year of construction: 1995 Condition: Function tested with manual shaking Technical data: With H 2 filter Suction nozzle: 160 mm Motor: 2.2 kW Fob Eerw Dw Eo Iihgogb Filter area: 11.5 sqm Vnenn: 1780 cbm/h Vmin: 1450 cbm/h Availability: short term Location: Röllbach

Condition: used, used paint mist extractor with 2 side baffles with 2 fans Fgobjkwhbfs E Iihgeb otherwise according to the pictures Availability: short term Storage location: Röllbach

Condition: used, Mobile suction unit used Fgob E Iijttxf Ujhgob technical data follow Availability: short term Storage location: Röllbach

Condition: used, Used paint mist disposal Feb E Iistv R Szshgogb older on rolls Availability: short term Storage location: Röllbach