Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume Kjdpfxjxwz H Ro Ah Uonf - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, volume flow: 1,500 m³/h, negative pressure: 2,100 Pa, intake manifold diameter: 140 mm, overall weight: 345 kg, input voltage: 380 V, space requirement width: 750 mm, space requirement length: 1,320 mm, space requirement height: 1,905 mm, Spänex mobile extraction unit SMU-R15 Year of manufacture: 2020, unused, 2.2 kW 140 mm Ø extraction nozzle, 1,500 m³/h air flow 2,100 Pa negative pressure, 65 dB, H3 certified Knedpfx Ahswanf Uo Uof 165 l drum, dimensions: 1,320 mm length, 750 mm width, 1,905 mm height Weight: 345 kg

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control Kjdpfx Aodgud Aoh Uenf TECHNICAL DATA extraction efficiency approx. 8900m3/h engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm weight 500kg Net price: PLN 18,500 Net price: EUR 4,400 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2023, Dimensions (L/W/H) , mm Filter capacity 122 m² Kjdow Nh Elopfx Ah Usnf Number of filters , St. For sale on behalf of a customer Technical details in pdf attachement ----- Schuko chip silo, including extraction system with overpressure filter, industrial briquetting press in cast iron design Type: Compacto CT 1100 S-20 ----- ----- Item 1 Schuko briquetting press and extraction system Item 2 Schuko 1 Radial fan located on the raw air side Item 3 Schuko pipe components Item 4 Schuko pneumatic energy-saving slide valve Item 5 Schuko overpressure filter system Item 6 Schuko return air Item 7 Schuko safety components in accordance with EN 12779 Item 8 Schuko industrial briquetting press in cast iron design Item 9 Schuko electrical control cabinet ----- Price of the above extraction system on request! ----- (Technical data according to manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: excellent (used), functionality: fully functional, GHEBAL extraction system Number of filter bags: 180 pcs Built-in rotary valve Fan positioned after the rotary valve Main motor power: 30 kW, can be converted to 22 kW Pneumatic filter bag shaking system Knjdpfx Aox H Ndfoh Uof Dimensions: 3550x200x7850 mm Weight: approx. 2000 kg

Condition: good (used), Year of construction: 2012, ASPIRATION POLYTECHNIK VACUMOBIL VT 160-L 1950m3/h, 2.2kW motor Can be installed in the work area (depending on dust type) Low residual dust concentration in return air < 0.1 mg/m³ (H3) according to TRGS 553 Closed air circuit, 100% utilization of thermal energy Large collection capacity with 1 mobile bin Height less than 2 m (intake mouth height center: 1.5m) Programmable control with automatic start (potential-free contact) No rupture vent required for St1 dusts IFA-certified filter media (retention rate 99.95%) Low energy consumption, high suction power IE3 motor, energy efficient Knjdjxzt Stepfx Ah Usf Automatic filter bag cleaning

Condition: good (used), exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos Kodpfx Aog I D Nyeh Uonf -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobil EA160A Extraction diameter: 160 mm Knjdperbiiwefx Ah Ujf Year of manufacture: 2006 Weight: 310 kg Rated air flow: 2050 m³/h Minimum air flow: 1447 m³/h 3.4 kW Automatic, motor-driven filter cleaning

Condition: new, Catalogue number x0192 TECHNICAL DATA Knjdeq U R H Uepfx Ah Ujf max. capacity: 14,600 m³/h max. compressed air: 4,500 Pa motor: 15 kW speed: 2,800 rpm metal impeller: 6 blades extraction nozzle diameter: 325 mm dimensions (L/W/H): 900/880/1050 mm weight: 265 kg – new device Possibility to purchase a reduction nozzle at extra cost. Net price: 9,850 PLN Net price: 2,350 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations in exchange rates)

Condition: new, Year of construction: 2025, Capacity: ~15,000 m³/h Motor power: 22 kW Filter surface area: 53.08 m² Helical gear reducer: 0.55 kW Kjdpex D Akqsfx Ah Uonf Vibration motor power: 0.17 kW (2 pcs.) Filter type: 3 micron, polyester Filter dimensions: Ø160 x 1100 mm Number of filters: 96 pcs. Automatic vibratory filter cloth cleaning system – during breaks and during filter operation, allows for continuous monitoring of proper operation. The filters used are classified as filtration category "G," allowing for air purification up to 0.2 mg/m³/h (H2).

Year of construction: 1987, condition: excellent (used), Extraction GRUSS Knjdpfx Aogq I E Hoh Uef with filter area 320 m2 198 pcs filter bags diameter 22 cm, length 235 cm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Auftragsnummer 162415, total height: 9,200 mm, total width: 4,300 mm, total length: 4,450 mm, overall weight: 12,000 kg, filter area: 390 m², type of input current: three-phase, negative pressure: 3,000 Pa, volume flow: 55,000 m³/h, control cabinet height: 2,200 mm, control cabinet length: 1,200 mm, control cabinet width: 420 mm, intake manifold diameter: 800 mm, nominal flow rate: 50,000 m³/h, input voltage: 400 V, nominal power: 90 kW (122.37 HP), power: 127 kW (172.67 HP), suction capacity: 55,000 m³/h, transport width: 4,300 mm, transport length: 9,200 mm, transport height: 4,450 mm, mobility: stationary, For sale is a stationary extraction system configured as a reverse air filter house from the year 2017. Kjdpfxexwykzj Ah Ujnf All technical details of the system for sale: - Reverse air filter house, brand: Spänex, vacuum type SLF 35-FH-U-6-2-S - Filter surface area: 390 m² - Equipped with discharge unit and reverse air fans - With inlet nozzles: 1x Ø 630mm, 1x Ø 560mm, 1x Ø 450mm - Dry fire extinguishing system - Maintenance platform - Rotary valve, type 22 / 100 EX II D/T4 - Extraction fan NG 800, type 56-SU-800-A003-MK with 90 kW output, efficiency class IE4, 55,000 m³/h, frequency-controlled via a Danfoss VFD, volume flow, and a total differential pressure of 4,800 Pa. - Includes a complete control cabinet, 420 x 1,200mm, in a walk-in outdoor cabin measuring 1,550mm x 2,300mm. The entire filter house will be placed as a complete unit onto a separate storage area on 15.12.2025. From that point, the buyer can prepare and load the unit for transport at their own responsibility.

Condition: used, Year of construction: 2001, Used machine Equipment and technical data: - Working area width x height: 2400 x 1600 mm - Air capacity: 7000 m³/h - Motor: 2.2 kW - Exhaust duct: 400 mm - with energy-saving stand - with supply air channels Note: The Ex-lights shown in the pictures are not included in the scope of delivery! Availability: short-term Knedpfxjxdpl Ue Ah Uef Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 10866888, type of input current: three-phase, filter area: 1,087 m², volume flow: 37,000 m³/h, intake manifold diameter: 600 mm, nominal flow rate: 37,000 m³/h, overall weight: 5,850 kg, total width: 4,500 mm, total length: 6,500 mm, total height: 5,785 mm, input voltage: 380 V, noise level: 82 dB, compressed air connection: 6 bar, nominal power: 60 kW (81.58 HP), extraction nozzle diameter: 630 mm, suction capacity: 37,000 m³/h, input current: 55 A, input frequency: 50 Hz, space requirement width: 6,000 mm, space requirement length: 12,000 mm, space requirement height: 5,785 mm, sheet thickness aluminum (max.): 2 mm, inlet: 630 mm, control voltage: 380 V, Equipment: CE marking, Dust collector SCHUKO with Goldcone cartridge filter. 2 x 30 kW ventilators Still in use in our workshop in Brussels, BELGIUM, until we move to our new building in September 2026. Only available in September 2026. Ksdpexuftvjfx Ah Ujnf

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 Knedpfx Ahedf S Sze Uef - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, Year of construction: 2025, Capacity ~ 15,000 m³/h Motor power 15 kW / 20 HP (optional: 18 kW motor) Filter surface area 57.9 m² Exhaust port diameter 400 mm Voltage 400 V Filter material polyester Filter permeability 3 microns Filter dimensions Ø152 x 1120 mm Number of filters 108 Dimensions (L x W x H) 4147.5 x 1129 x 2480 mm Weight 870 kg Scope of delivery: Polyester filter, 3 microns 5 containers 3 chimneys Filter cleaning using a vibration system with control Kjdpfx Aex D Ah Neh Ujnf The automatic vibration filter cloth cleaning system allows for continuous monitoring of filter operation during breaks and during operation. The filters used are classified as "G" filtration category, which allows for air purification up to 0.2 mg/m3/h (H2).

Condition: excellent (used), Extraction unit Gruss, 128 bags Knjdpegq Nxmefx Ah Uof Diameter 22 cm, length 235 cm

Condition: good (used), Year of construction: 2020, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low-pressure radial fan, blower, pressure blower, side channel blower, side channel blower, ring blower, vacuum pump, blower, radial fan -Manufacturer: cimme, dust extraction fan radial fan type CBJ G06330 E4 RD -Engine: 9.2 kW 2925 rpm -Volume flow: 35/63 m³/min -Connection: Inlet Ø 250 mm -Connection: Outlet Ø 250 mm -Fan wheel: Ø 660 x 70 mm -Protection class: IP55 Kjdpfx Aexpfylsh Uenf -Dimensions: 1090/780/H1330 mm -Weight: 245 kg

Condition: excellent (used), Year of construction: 2017, Nedermann S / M / 68W sawdust extraction - after the technical review - year of production 2017 - ATEX marking TECHNICAL PARAMETERS: fan power 15 kW capacity 8000 m3 / h compression 4603 Pa vibration system for self-cleaning of filter bags 2 x 0.12 kW spigot diameter 300 mm dimensions (length / width / height) 490/125/360 cm Knsdog Db U Uspfx Ah Ujf PIPE SET INCLUDED: - 6 pieces of diameter 300 mm, length 1250 mm - 2 x 90 ° elbow - a set of pipes with a tee, diameter 250 mm, length 1400 mm - 300 mm tee by 2 x 250 mm - 45 ° elbow - 15 ° elbow

Condition: good (used), Year of construction: 2010, Net price: €4,250 Year of manufacture: 2010 Technical details can be found in the pictures. Kjdjwkfxaopfx Ah Usnf You will receive an invoice with VAT shown separately. Shipping by freight forwarder is possible. Price is ex warehouse Haldensleben.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Knodpfxsd Su Hxj Ah Uef Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: excellent (used), Felder RL 250 Extraction Unit Knodpfox A Exujx Ah Uef Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: used, functionality: fully functional, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Engine: 50 kW - Capacity approx.: 30,000 m3/h - Motor speed: 2960 rpm Kjdsxyirmjpfx Ah Uenf - Impeller blade height: 230 mm - Impeller speed: 2350 RPM - Number of blades: 8 - Inlet diameter: 500 mm - Outlet dimension: 480 x 380 mm - Overall dimensions (L/W/H): 240 x 150 x 150 cm - Weight: ~600 kg

Condition: good (used), Clean air extraction Kedpfxorb D Ns Ah Uonf Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Year of construction: 2022, condition: new, Highlights of our two extraction systems Eco 3000 and Eco 5000 +Solid sheet metal construction ensures ideal flow conditions +resistant wind impeller +constant extraction performance even under constant stress + Connection of up to a maximum of 3/4 machines possible using the supplied distributors +high suction power due to large filter surface (filter dimensions: ø500x1100mm) +Integrated driving device for easy manoeuvring Scope of delivery: Running gear, filter and chip bag, distributor (connection for 3/4xø100mm suction pipes), incl Ksdpfeidma Nox Ah Uonf ---- Device available in two designs: *in the following marked with position 1) and 2) 1) Extraction system Eco 3000 - 1.5 kW * with a chip bag and an industrial polyester filter Motor power S1 in W 1500 Installation dimensions in mm 985x560x2250 Extraction capacity in m³/h: 3,000 Suction outlets 3x (ø100mm) Negative pressure in Pa: 2200 2) Extraction system Eco 5000 - 2.2 kW * with two chip bags and two industrial polyester filters Motor power S1 in W 2200 Installation dimensions in mm 1540x560x2270 Extraction capacity in m³/h: 5,000 Suction outlets 4x (ø100mm) Negative pressure in Pa: 2600 --- Information applies to both devices: Sound pressure level in dB(A) < 85 dB Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for suction with automatic cleaning + €4,700 net