Used Edgebanders for sale (589)

Condition: used, Control with TS 200 Touch screen Panel height 55 mm Solid wood mm 8 Pvc / Abs from 0.4 up to 3 mm Feed speed up to mt / min 14 Adjustable working height Panel introduction guide Side roller conveyor with idle wheels for panel support Reel holder plate Gluing unit for EVA hot melt glue with glue pot Edge pressure group on straight profiles with adjustable pressure rollers End trimming unit with 2 motors with automatic inclination adjustment Gleaning \ trimming unit with 2 adjustable tilting motors Rounding unit with 2 multifunction motors (gleaner + rounder) Edge scraper group Glue scraper group Brush group Cgobevt Tqks Ha R Iwst

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Types:1436 Machine nr:261/9-04 Year of construction:1990 Glueing Caps,Milling Round milling Browning agreggat Rolen:3mm Thickness45mm Cgjb Ha R Ijubyf Sewst

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, overall weight: 915 kg, type of input current: three-phase, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, frequency: 50 Hz, Worktable dimensions 3465x710mm, height 875mm Cgsb Ha Reuacqzj Iwjt Gluing thickness roller edges 0.4 - 3mm Glue-on thickness strip edges up to 5mm, min - max. workpiece thickness 8-50mm min. Workpiece length/width with roller edges 190/110mm min. Length of panel 120mm Feed speed 9 m/min Feed motor 0.55 kW Working air pressure of pneumatics 6.5 bar Suction hood glue container 80mm 2 suction hoods Flush trimming unit 60mm 2 extraction hoods Pre-milling unit 80mm Working temperature 20-190C° Equipment: Pre-milling unit (jointing) Rounding unit (corner copying) Gluing unit, applying and pressing on the edge (self-lubricating glue pot) Trimming unit, for cutting off 90° of the protruding edge at the front and rear Flush trimming unit (joining) Scraper unit Buffing unit Surface scraper Automatic application of the strip edges with edge magazine Kit for quick change of the glue container Device for heating the panel edge Non-stick agent spraying unit Spraying unit for finishing the edge

Condition: new, Year of construction: 2024, STOCK SALE!!! In stock: Compact edge bander, already equipped with a pre-milling unit. Ideal for small workshops with very limited space. TECHNICAL SPECIFICATIONS: - Worktable dimensions: 2800 x 570 mm - Worktable height: 904 mm Cgeb Hjvzqaxja R Iwjt - Panel thickness: 12 - 50 mm - Edge band thickness (roll): 0.4 - 3.0 mm - Solid wood strip thickness: up to 5.0 mm - Minimum panel width (roll edge banding): 110 mm - Minimum panel length (roll edge banding): 190 mm - Feed speed: 7.0 m/min - Required compressed air pressure: 6.0 bar PRE-MILLING UNIT: - Motor power: 2.2 kW - Tool diameter: 80 mm - Tool height: 56 mm - Rotation speed: 9,000 RPM - Material removal options: 0.5 / 1.0 / 1.5 / 2.0 mm !!! The price does not include VAT!!! we do not provide service and installation

Year of construction: 2009, Condition: like new (used), Glue tank Guillotine Cgsb Ha R Ioidrd Djwot Cutting the front / back of the ball Milling up / down cutters R2 Material feed 11 m / min European CE certificate

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: F4769, HEBROCK F4 next Edge banding machine Exhibition machine Order no.: F4769, year 2024 Cgebsvc Ddgs Ha R Iwjt Item number: JA_G241203 Description: Max. Max. Joint thickness 2mm Max. Edge thickness 3 mm Workpiece thickness 8 - 50 mm Min. workpiece width 80 mm Min. workpiece length 180 mm Feed rate approx. 10 m/min Ready for operation approx. 3.5 min. Interchangeable glue tray Yes PUR Yes Radius cutter R2 Radius scraper R2 / R1 Surface scraper Yes Corner rounding Yes Buffing ---- Power 400V / 50 Hz 7.4 kW Suction nozzle 140 mm Dimensions (LWH) 4050 x 1450 x 1500 mm Weight approx. 840 kg Subject to errors and changes in technical characteristics. Note: New machine: - Prices are collection prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) - Subject to prior sale! - You will receive an invoice with VAT shown. - The buyer is free to inspect the items on site. - Our general terms and conditions apply. - Special agreements are only possible by written agreement. - Any items in the background of the picture are not included in the scope of delivery. - Saw blades are for illustration purposes only and are not included in the scope of delivery. Shipping options: - We will be happy to make you a transportation offer. - Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. (Assembly and instruction of the goods for demonstration purposes is optionally possible by arrangement). - Optionally, our trained service personnel can set up the machine at your premises and give you a short briefing. Travel, travel and service times at an extra charge.

Condition: new, Year of construction: 2025, JC-500 Fully Automatic Soft Forming Edge Banding Machine High-speed and intelligent operation, ideal for handle-less cabinet door production. One-click switching between different panel thicknesses and profile shapes. Supports three board thicknesses and up to 20 shape variations. Strong steel frame structure with anti-rust treatment and electrostatic painting for durability and stability. 21.5-inch high-definition rotatable touchscreen for easy control and clear interface display. Precision milling unit with ≤0.2mm tolerance, featuring a lubrication system for smooth rail movement and extended lifespan. Csb Ha R Iewavbdjwsgt Advanced gluing system with pot-style glue tank, fast heating, easy glue discharge, and simple cleaning. Independent pressing of angled and straight edges for stronger adhesion and better finish. Temperature-controlled pressing system with air conditioning and dual heating/cooling mode for consistent performance. Automatic glue remover spray system with four cleaning units to keep the surface clean and prevent glue buildup. Rough trimming system removes excess edge band using crushing rotary cutters for efficient pre-shaping. High-precision front and rear trimming with synchronized multi-tooth silent saw blades. Fine trimming creates R-shaped corners, aligning top and bottom edges with the wood panel. Surface leveling ensures the board remains flush and smooth. Edge scraping removes knife marks and glue lines, automatically adapting to the shape of the panel. Final polishing removes excess glue and ensures a smooth, clean edge banding finish.

Condition: ready for operation (used), Year of construction: 1994, Pozicije delovanja, 1. nanos lepila 2. odrez grobi furnirja 3. odrez fini spredaj Cgjb Hokt Nc Dsa R Iwst 4. odrez fini zadaj 5. posnemanje pod kotom zgoraj 6. posnemanje pod kotom spodaj Delovna površina 3700x140 Zunanje dimenzije 3700x850x1320

Year of construction: 2001, Condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Year of production 2001 Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type Csb Ha Rjgyz Rko Iwjgt to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: new, Year of construction: 2025, STOCK SALE!!! In stock: One of the most popular edge banders in recent years! Csb Haovzp Une R Iwsgt The ME40-TR is compact and designed for craftsmen and small woodworking workshops. TECHNICAL SPECIFICATIONS: - 2x DIA milling cutters (54 mm height) - Processes workpieces up to 50 mm thick - Industrial transport chain for workpiece feeding - Clear display for adjustments - Numerical indicator for edge band thickness adjustment - ADDITIONAL EQUIPMENT (already installed): - Capability for solid wood strips (5 mm) - Quick-change glue pot system - Additional glue pot for PUR adhesive - Unit for applying release agent - Unit for applying cleaning agent before brushes - LED interior lighting - Scrapers for edge banding - Scrapers for glue residue - Brushes !!! The price does not include VAT!!! we do not provide service and installation

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, total length: 3,600 mm, total width: 1,100 mm, edge thickness (max.): 60 mm, overall weight: 1,000 kg, input voltage: 400 V, frequency: 50 Hz, incl. joining unit up to max. 2mm chip removal, edge thickness 0.4-5mm, workpiece height 8-60mm, 11m/min feed speed, min. workpiece dimensions L=140mm W=70mm, automatic feeding of roll materials, individual feeding of strip materials, impact shears for rigid PVC/ABS up to 3mm thick, Teflon-coated glue tray with 2kg, glue application with glue roller 3x 400 V motor voltage, 50 Hz motor frequency, max. connected load 7.0 kW Joining unit with 2 slide milling cutters up to max. 2 mm chip removal Min. workpiece width: *The minimum workpiece width varies depending on workpiece length, height and surface finish: 70 mm Endless edge feed via support plate, Ø 720 mm, for PVC/ABS Automatic edge feed for edging materials 0.4-5 mm thick Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS Glue unit Teflon-coated, 2 kg for hot-melt adhesive granulate Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge Cross-cut saw unit with HF motor, pneu. Adjustment of 0°/20° bevel cross-cuts Multifunction trimming unit, 12,000 rpm, 2x 0.55 kW, pneumatic selection for radius, flush and chamfer trimming for thin edges Radius scraper unit, mechanically switchable for R=2 mm Surface scraper unit, can be switched on mechanically Polishing unit, 2 motors, Spraying device for cleaning agent in front of polishing unit Pivoting control panel with 5.7" color touch screen Color touch screen Workpiece transport via chain conveyor Pull-out workpiece support Further technical data: Workpiece length: min. 140 mm Suction connection: 2 x 80 / 1 x 120 mm Edge thickness: 0.4 - 5.0 mm Feed speed: 11 m/min Workpiece width: 70 mm Workpiece thickness: 8 - 60 mm Cgsb Ha R Iovfnqpjwot

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Rectifier group with two motors Lamps to heat the edge of the panel 2-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Rounding unit FK 11 with 2 multifunction motors (gleaner + rounder) with control adjustment numeric automatically Edge scraper group Glue scraper group Brush group Cgeb Hevph Hlea R Iwet

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 10588, total length: 12,000 mm, edge thickness (max.): 20 mm, overall weight: 8,500 kg, compressed air connection: 7 bar, Used single-sided IMA edge banding machine for straight edges; for jointing, gluing, and finishing various edge materials. Fixed stop side on the right. SPECIFICATION / EQUIPMENT: Basic machine with 80 mm wide conveyor chain as workpiece feeding device, - Max. workpiece thickness 60 mm - Motorized height-adjustment of top pressure - Workpiece support with rollers, extendable up to approx. 700 mm - Glue roller lift when feed stops - Glue roller clamping before reaching workpiece's rear edge - (Remote) manual operation for easy machine setup - Adjustable infeed guide via NC axis - Jointing trimming/pre-milling (08.376), 2x4 kW, controlled (jumping) GLUING SECTION, consisting of: - IMA Quick-Lock gluing system, suitable for PUR glue - Pre-heating of workpiece - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - 2-fold roll-change edging magazine - Pressure zone with automatic horizontal adjustment (NC) to the edge thickness, 1 driven, 5 non-driven pressure rollers. POST-PROCESSING SECTION: - Horizontal end trimming (snipping) unit, 2 motors (front/rear edge) - Pre- and flush trimming unit 1.15 kW, top/bottom - MFA 08.342 profile trimming unit (corner rounding), 2 motors (top/bottom/front/back) - Profile scraper, top/bottom, with interchangeable heads - Flat scraper 08.50, top/bottom - Buffing unit, top/bottom - Grooving unit 08.183, 4 kW, controlled (jumping) Cgob Hajwc T T Nj R Iwet - Belt sanding unit 08.063 CONTROL SYSTEM: IMA ICOS Open

Condition: used, Year of construction: 2021, SECOND-HAND EDGER FAHD TYPE ASTRA 50/7R - Pre millingunit - Edge gluing and pressing unit - End trimming unit - Corner rounding unit - Edge scraping unit - Brushes - Year 2021 compliant with CE standards Cgjb Hjrnkihsa R Iwot

Condition: excellent (used), Gluing unit Cgjb Ha R Isttu Syswot Printing station Up and down cutter Length 2.65 Width 0.86 Height 0.9 m

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 1000004052, Equipment: type plate available, For sale edgebanding machine Biesse Stream B1 8.5 with return table Edgebanding machine in continuous use - edgebanding in PUR and AIR FORCE technology feed rate 1-25 mb/min wrapping methods - AIR FORCE - PUR - EVA maximum height of the elements being glued - 40 mm maximum width of the elements on the return table - 1300 mm line composition - 2 milling heads height 44mm - EVA / PUR overlay unit - AIR FORCE Cgeb Hju Suh Sja R Iwot - drills - pre-profile cutters - rounders - groove saw - profile cyclers - flat cyclines - polishers magazine for 12 rolls of edge banding in case of questions please contact us.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, total length: 3,600 mm, total width: 1,100 mm, edge thickness (max.): 60 mm, overall weight: 1,000 kg, input voltage: 400 V, frequency: 50 Hz, Edge banding machine G 560, glue pot, scraper, polishing unit, 3x400V 50Hz CE with joining unit, edge banding machine for EVA hot melt adhesive Functional panel on the operator's side Roller support plate Teflon-coated glue container, automatic temperature reduction of the glue pot, finely adjustable glue dispenser Automat. Edge feeding for roll + strip materials Joining unit with 2 slide jointing cutters Min. workpiece width *The minimum workpiece width varies depending on workpiece length, height and surface finish: 70 mm Endless edge feed via support plate, Ø 720 mm, for PVC/ABS Automatic edge feed for edging materials 0.4-5 mm thick Cjbevfnqcs Ha R Iwegt Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS Glue unit Teflon-coated, 2 kg for hot-melt adhesive granulate Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge Cross-cut saw unit Multifunctional trimming unit, 12,000 rpm, 2x 0.55 kW, radius trimming, flush trimming, chamfer trimming for thin edges, Radius scraper unit, mechanically switchable for R=2 mm Control panel with LCD display and keypad Workpiece transport via chain conveyor Pull-out workpiece support Further technical data: Workpiece length: min. 140 mm Suction connection: 2 x 80 / 1 x 120 mm Edge thickness: 0.4 - 5.0 mm Feed speed: 9 m/min Workpiece width: 70 mm Workpiece thickness: 8 - 60 mm

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, product length (min.): 60 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Glued edge thickness: max. 20 mm Maximum bonding height: 60 mm Maximum rolled material thickness: 3 mm Piece width: min. 60 mm Maximum feed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: top belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue container: changeable/variable Sprayer: available Assembly milling unit: available Trimmer group: with 2 motors Milling stations: flush/radial/bevel, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip storage: available Aggregates: synchronized aggregates with NC axis(s) Machine version: left side Quick-change units: available MACHINES DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 Cebsv Ax E Ej Ha R Iwegt - HOMAG FK 11 - HOMAG profile scraper device PN 10 - HOMAG FA 11 finishing unit

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Cgob Ha R Ijhf Acljwjt Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: new, Year of construction: 2024, Functionality: fully functional, Hebrock edge banding machine type: F 4 Year of manufacture 2024 Se No. F 4371 / Incl. special equipment: - Quick-change preparation for corner milling machine No. F4/08/4 Cgobjvkv Ele Ha R Iwjt - Additional change motor for corner milling machine No. F4/08/5 - Radius scraper (pneumatic excavation) No. F4/9 - Multi-radius scraper (R2/1) No. F4/09/4 - Spray device for release agent No. F 4/24/1 - Pneumatic 3-point adjustment No. F 4/30 - Joining up to 50 mm workpiece thickness No. F 4/31 Machine can be put into operation on site by Hebrock. (Factory instruction) Costs: €798 + VAT List price of the machine including equipment: €49,110 excluding VAT Machine available immediately

Condition: excellent (used), Gluing machine Guillotine Cgeb Ha Rettu Rie Iwst cross-cut saws milling cutter Scraper Polishing machine

Condition: excellent (used), Year of construction: 2009, Year of production: 2009 Manufacturer: IMA Technical condition: good, regularly serviced. Pre-cutters: New, installed about a month ago, made of diamonds. Flat cyclers: Replaced, a better version was installed, as can be seen in the attached photos. Technical documentation: Available as a PDF file, if required. Additional information: The machine is running efficiently thanks to new pre-cutters, which were installed recently and worked for about a month. The flat cyclers have also been replaced with a better version, as can be easily identified by reviewing the attached photos. Csb Ha Rjrur Urj Iwjgt Feel free to call us for more information or to schedule a time to see the machine. Technical documentation in the form of a PDF file is also available to provide full clarity on the machine's specifications and operation.

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, total length: 4,550 mm, edge thickness (max.): 6 mm, input voltage: 400 V, power: 1.8 kW (2.45 HP), frequency: 50 Hz, workpiece width (max.): 60 mm, Incl. 2nd glue pot Equipment: Joining unit with 2 slide milling cutters D=100 mm up to max. 3 mm chip removal, 2 motors 1.8 kW each (9,000 rpm), tool height 63 mm Endless edge feed via support plate Automatic edge feed for edging materials 0.4-5 mm thick Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS Glue unit Teflon-coated, 1.5 kg for hot-melt adhesive granulate Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge Cross-cut saw unit with 2 HF motor, pneu. Adjustment from 0°/15° Flush trimming unit top and bottom with 2 HF motors, radius cutter included (R=2mm), 2x 0.35 kW, 2 pneumatic positions via control panel Corner rounding unit "Round 1", enables automatic rounding of PVC / ABS edges at the front and rear corners. Panel thickness 10-45 mm, min. panel thickness 280 mm Cob Ha R Iovfnnhewsgt Surface scraper unit, pneumatically switchable for R=2 mm Spraying device with non-stick agent in front of the joining unit Spraying device with cleaning agent in front of the surface scraper Pivoting control panel StarTouch" control unit with 12" touchscreen Pull-out workpiece support Further technical data: Feed speed: 11 m/min Workpiece length: min. 140 mm Suction connection: 4 x 80 / 2 x 48 mm Working height: 900 mm Speed: 9000 rpm Edge thickness: 0.4 - 6.0 mm Workpiece thickness: 8 - 60 mm

Condition: excellent (used), Adhesive unit Guillotine Chop saws Straight cutters Scraper Cgeb Ha R Ijrzaavjwot Polishing machine Without pre-milling

Condition: excellent (used), 2 pre-cutters gluing unit Guillotine Drip unit with 2 saws Cgjb Ha Roulh Nue Iwot Straight cutter Rounding cutter