Used extraction systems (stationary) for sale (154)

Condition: good (used), functionality: fully functional, Dust extraction system from a former carpentry shop for sale We are selling a dust extraction system from a former carpentry shop. The system is currently fully installed in our office and storage areas and can be inspected and tested in operation before purchase. Known information about the system: Manufacturer: Höcker Designed for up to 12 machines All extraction points have pneumatically controlled openings The system is controlled via a central control cabinet that monitors the connected units and automatically activates the extraction as needed. Gbedpfx Aj Aiuaceanow Since we only took over the premises after the previous use, we unfortunately have only limited technical details about the system. However, we will gladly try to obtain further information if you have specific questions. The system can be inspected and tested on site after prior arrangement. The buyer is responsible for dismantling the system. We can offer assistance if required. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 41 mbar, suction capacity: 16,800 m³/h, filter area: 150 m², Central dust extraction system, wood chip extractor, dust collector, self-cleaning filter, vacuum-operated, brand NESTRO. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Suitable for all types of dry dust in various technological processes. Bag filter, self-cleaning Nestro JET 9/5/33 2E Gbjdpfx As Ai Sdleanow Year of manufacture: 2007 Filtration area: 150 m2 Fan power: 30 kW Device capacity: 16,800 m3/h Maximum vacuum: 4100 Pa Filter capacity: 22,000 m3/h Complete airlock Stock number: 1119

Condition: used, Year of construction: 2006, functionality: unexamined, volume flow: 25,300 m³/h, filter area: 123 m², actuation type: electric, total height: 4,600 mm, total length: 5,540 mm, total width: 1,800 mm, Equipment: CE marking, In operation at our facility until week 31 of 2026. For sale after the consolidation of several smaller filters into a single large filter housing. Material extracted: wood chips and dust. Gbedpfe Ahhhwjx Aanow Filter hoses replaced in 2020. Documented maintenance: 2012, 2020, 2024. Scope of sale: - 1 filter housing, Rippert RDSN 7; L 5.6 x W 1.8 x H 4.6 m - 1 cyclone separator including steel frame; L 2.4 x W 2.4 x H 8 m - 2 raw air fans - Optional, associated pipelines, at no extra charge - Optional, 2 matching radial impellers as spare parts, new, balanced, manufactured in 2025, plus €2,500 net Sale includes foundation. Inspection possible. Subject to prior sale.

Condition: like new (used), Year of construction: 2016, AL-KO POWER UNIT 300 incl. briquetting press Alko Type 300P-BP 30-50 Suction nozzle 300 mm Gbsdpo Ahw T Dofx Aanow Motor rated power 7.5 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow rate 6,000 m3/h Rated volume flow rate* 5,089 m3/h Negative pressure at rated volume 2,587 Pa Filter area 30 m2 Pre-separator integrated Extinguishing system integrated Control for 8 machines Chip collection volume (net/gross) briquetting press 900 liters Sound pressure level 71 dB(A) Dimensions (L / W / H) in mm 3,000 x 1,361 x 2,817 Briquet diameter 50 mm Net weight without packaging 1,570 Absolutely new condition, from a school workshop

Condition: used, Year of construction: 2022, machine/vehicle number: .35.12.113.22, Dust extraction system FELDER RL 350, 2022. Gbsdpfx As Aibqhsanew

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. Gedoz Erfdopfx Aanjbw It can be inspected up to week 42; after that, we will dismantle it. The impeller was replaced in October 2025 – a parts invoice is available.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose extraction and filtration system, built in 2006, from a wood processing company. The system is designed as a screw filter and includes a complete extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filtration system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge, there is a suitable container with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the extraction control system and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw and four cleaning groups, as well as a Schneider-Electric frequency converter for the extraction fan. Technical data Aagaard / Finnrose industrial extraction system / screw filter Year of construction: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for extraction control and heat recovery Frequency converter for main fan Heat recovery / return air system available 6 m³ container on a mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available upon agreement Dimensions Gbsdez Ik Atopfx Aanew Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport and any customs clearance will be carried out entirely by the buyer at his own expense and responsibility. All necessary skilled personnel, lifting equipment, cranes and means of transport must be organized by the buyer. Inspection possible by appointment. Sale ex works in its current condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 19,500.00 EUR Price net, any statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2019, Dust extraction system Manufacturer: Felder Type: RL 350 Year of manufacture: 2019 Technical data Gbsdpfx Aas Aiglmsnow Motor power: 11 kW Voltage: 400 V Frequency: 50 Hz Maximum air volume flow: 8,000 m³/h Nominal air volume flow: 6,950 m³/h Negative pressure at 20 m/s: 2,630 Pa Dust extraction connection: 350 mm Filter area: 71 m² Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Gbsdpfxjz R Suls Aanew Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total height: 3,500 mm, total length: 20,000 mm, total width: 2,500 mm, overall weight: 12,000 kg, Equipment: documentation/manual, The Modesta exhaust system is in good condition, is still installed, and can be seen in operation. It includes two automatic diverter valves, allowing you to choose whether to discharge into the bunker/silo or into two containers. Gbsdpfjx Ezlfex Aanew

Condition: used, Year of construction: 1995, functionality: unexamined, suction capacity: 10,000 m³/h, actuation type: electric, We are selling a dust extraction system from Wipos that we no longer need. We used the system to blow the chips into a container. The container is not included in this auction. Inspection is possible. Gjdpszunziofx Aanebw Price is ex works; the buyer must dismantle the system. On-site support is available. No warranty is provided for the system!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, suction capacity: 30,000 m³/h, filter area: 152 m², actuation type: electric, total height: 3,500 mm, total length: 5,855 mm, total width: 1,920 mm, overall weight: 1,480 kg, Equipment: documentation/manual, The HOLZING RLA 1000 VIBER Power industrial stationary dust extraction unit is an advanced dust collection device designed for large production facilities and woodworking plants. Its design allows for outdoor installation, maximizing the use of space inside the production hall. Thanks to the integration of modern Viber Power technology, the unit continuously monitors operating parameters and automatically tracks the filter contamination level. The use of sound-absorbing enclosures for the fans effectively reduces noise generation, and the special blade geometry ensures maximum energy efficiency and stable vacuum pressure. Godpfxezv Sx Io Aanobw

Condition: used, Year of construction: 2021, Reliable ELBH TSP-25 NT hot-water biomass boiler designed for efficient combustion of wood fuel. Manufactured in 2021, the boiler is suitable for sawmills, timber drying plants, biomass heating systems, and industrial facilities requiring a dependable renewable heat source. Key Specifications Manufacturer: ELBH-CZ Model: TSP-25 NT Thermal output: 266 kW Water volume: 750 l Gbedpfx Aao Ah Sx Rsnjw Heating surface: 26 m² Maximum operating temperature: 95 °C Operating pressure: 0.3 MPa Maximum allowable pressure: 0.5 MPa Fuel: Wood biomass Electrical power consumption: 3.5 kW Dimensions: 2315 × 1800 × 1150 mm Weight: 5,000 kg Year of manufacture: 2021 Suitable as a heat source for timber drying chambers, industrial heating systems, wood-processing plants, and biomass energy applications.

Condition: used, Year of construction: 2018, Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible. Gjdpfx Aoz R A Nrsanjbw

Condition: excellent (used), Year of construction: 1999, 36 filter bags dust extraction duct height: 7.5 m external dimensions of the dust extraction duct: 270 x 150 cm turbine power: 11 kW Gbjdpfxoz Spuws Aanow fire extinguisher automatic hydraulic sawdust feeding system for the briquetting machine bag shaking mechanism briquetting machine motor power: 4 kW year: 1999

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 22 A, type of input current: three-phase, volume flow: 6,920 m³/h, intake vacuum (max.): 2,630 mbar, suction capacity: 8,000 m³/h, intake manifold diameter: 350 mm, overall weight: 825 kg, Equipment: CE marking, documentation/manual, We are offering this very well-maintained FELDER RL 350 stationary extraction system, year of manufacture 2023, including all pipes and shut-off dampers. Serial number: 35.03.120.23 Rated voltage: 400.0 V Number of phases: 3 Rated current: 22.0 A Rated power: 11.0 kW Year of manufacture: 2023 Extraction port diameter: 350 mm Motor speed: 2,900 rpm Gsdpfjytq Dxex Aansbw Nominal volume flow (at 20 m/s): 6,920 m³/h Negative pressure at nominal volume flow: 2,630 Pa Weight: 825 kg Main fuse: 32 A Including silencer 5 electropneumatic slide valves and control system Extinguishing device included If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Can be installed outdoors. Gedpfxszukulo Aanobw New units can be installed upon request. The control system is equipped with a speed control function via a frequency converter.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Gbodpfx As Aba Rgoanew Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: excellent (used), Year of construction: 2022, NESTRO dust extraction system Capacity: approx. 20,000 m³/h Filter area: 175 m² Vacuum fan: 22 kW The filter is equipped with an automatic filter bag cleaning system, an air return system, control system, and fire and explosion protection. Technical data: Manufacturer: NESTRO / Netecs Type: NFP 9/9/30 Year of manufacture: 2022 Production number: 22/6014 System capacity: approx. 20,000 m³/h Max. filter capacity: approx. 22,000 m³/h Vacuum fan: 22 kW Filter area: 175 m² Number of filter bags: 81 pcs. Bag dimensions: DN 230 × 3000 mm Max. filter vacuum: 4000 Pa Gbjdpfxj Af Utze Aanow Max. dust moisture: 15% Filter cleaning: automatic, vibration-based Cleaning without compressed air Filter emptying: rotary airlock Construction: galvanized sheet metal, 2 mm thick Noise level: < 80 dB(A) Filter voltage: 400 V Frequency: 50 Hz Filter weight: 3612 kg Variable frequency drive: 22 kW Equipment and safety: automatic vibration-based filter bag cleaning antistatic filter fabric, category C dry extinguishing system certified explosion-proof flaps/panels design compliant with ATEX requirements fire damper on the air return adjustable air return damper 0–100% control of fan, rotary airlock, cleaning, and safety features pressure sensor and automatic capacity adjustment via a variable frequency drive ladder and service platform TECHNICAL CONDITION: PERFECT!!!!

Condition: used, Year of construction: 2008, machine/vehicle number: 1001877, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 14,100 m³/h, intake vacuum (max.): 450 mbar, suction capacity: 14,100 m³/h, intake manifold diameter: 450 mm, filter area: 125 m², actuation type: electric, total height: 5,800 mm, total length: 2,100 mm, total width: 2,100 mm, overall weight: 2,000 kg, Equipment: CE marking, documentation/manual, dust extraction, Schuko Ecovar extraction system, 14,000 m³/h – complete and operational Complete Schuko Ecovar industrial extraction system for sale, including a 22 kW main fan, a 7.5 kW transport fan, and the corresponding control system. The system is currently in operation and can be inspected while it is running. Due to an expansion of our capacity, this system will be replaced by a larger, new Schuko extraction system. An interesting complete system for companies looking for a powerful used extraction/filtration system with a capacity of approximately 14,000 m³/h. Key features * Capacity: approx. 14,000 m³/h * Filter area: 125 m² * Main fan: 22 kW * Transport fan: 7.5 kW * 100 filter hoses * Electric/pneumatic filter cleaning * Antistatic filter material Gbodpez Egzmefx Aanjw * Includes the corresponding control system * Complete system * Currently in use and can be inspected while running Technical data for the filter system Brand: Schuko Type: Ecovar 04 22020/25/125, through-flow Design: overpressure, static Number of elements: 1 Material extraction: transport fan Filter material: antistatic polyester needle felt, BIA, AWN 05 Diameter of filter hoses: Ø 160 mm Length of filter hoses: 2,500 mm Number of filter hoses: 100 pieces Filter fabric area: 125 m² Filter cleaning: electric/pneumatic Weight: approx. 2,000 kg Dimensions of the filter system (L × W × H): approx. 2,100 × 2,100 × 6,000 mm Main fan Brand: Schuko Type: S 450/O/L2 Connection diameter: Ø 450 mm Capacity: 14,100 m³/h at 3,412 Pa Motor power: 22 kW Drive: direct Transport fan Brand: Schuko Type: TSK 250/O/S4 Connection diameter: Ø 250 mm Capacity: 4,500 m³/h at 3,344 Pa Motor power: 7.5 kW Drive: indirect Design: reinforced Condition and availability The extraction system is currently operational and is being sold only because it is being replaced by a new Schuko system with a larger capacity. This provides the opportunity to inspect the system while it is running before dismantling. Availability upon consultation. Dismantling and transport upon consultation. Serious interest? Please feel free to contact us for additional information, photos, technical data, or to arrange an appointment to inspect the system while it is running.

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Gjdpoz I Uc Defx Aanjbw Number of dust containers 3 St. Weight ca. 500 kg 200 mm

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 020020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 4,500 m³/h, total height: 2,000 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 280 kg, For sale is a fully functional industrial dust extraction unit from HOLZING / MÜNALSAN, model RLA 125 VIBER. The unit is used, in good technical condition, and fully operational. It is ready for further use. The dust extraction unit is designed for industrial applications, including the extraction of dust, wood chips, and other contaminants generated during material processing. Technical data: Manufacturer: KMA Maszyny / MÜNALSAN Type: RLA 125 VIBER Gjdpfx Aajz D Sm Esnsbw Year of manufacture: 2020 Serial number: 020020 Motor power: 3 kW Power supply: 400 V Frequency: 50 Hz Maximum capacity: approx. 4500 m³/h Unit weight: approx. 280 kg Solid, metal construction Installation with pipes and fittings as shown in the photos The unit has been inspected and is functioning correctly. The visual condition is as shown in the photos – normal signs of use, dirt, and wear are visible, but they do not affect the operation. We are selling the exact unit shown in the photos. It is possible to inspect the unit on-site before purchase. The stated price is indicative and does not constitute a binding offer. The final selling price will be determined individually after inspection and verification of the unit's technical condition. Due to its size and weight, personal collection is preferred. Transportation is also possible after prior arrangement.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD extraction unit, without control software. Dust extraction unit, chip extraction, self-cleaning filter, vacuum-based ALKO ECO JET. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Gbjdpjyrqnzofx Aansw It is ideally suited for all types of dry dust generated in various technological processes. Filter bags can be replaced according to specific requirements and intended use.

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Gedpfx Aajzlbqrjnsbw Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS per specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for ...

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm Gbedpfx Aezvz Tbsanew - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment