Used extruders & extrusion lines for sale (199)

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Nlodpfoxr Hgxjx Ahzjb

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Stainless steel cooling tank Sheer dryer Sheer granulator Nedpfxoxzfdbo Ahzslb

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Nljdpfx Ahoyhcghozjb Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Barrel and screws are in a good condition.

Condition: new, functionality: fully functional, - Single screw extruder Nodpfxsrg Ebcs Ahzolb - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles and pipes Manufacturer: Hans Weber Maschinenfabrik GmbH Model: PS-2 Year of manufacture: 2002 Serial no.: PS 2 104 Technical specifications: Profile dimensions: Width: 200 mm Height: 100 mm Pipe diameter: max. 100 mm Shortest cutting cycle: approx. 6 sec. Carriage travel: max. 400 mm Cutting speed: approx. 60 m/sec. Clamping force: up to 1100 N (adjustable) Saw blade diameter: 400 mm Dimensions: 1830 x 1000 x 1600 mm (LxWxH) Weight: approx. 500 kg Condition: used, as seen Nlodpsy Ulhiefx Ahzob Accessories: New maintenance unit for compressed air New incremental encoder, incl. measuring wheel and connection cable for length measurement Note: The saw was in use at an education and research centre and therefore has very few operating hours.

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Nodpfovy It Tex Ahzolb Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 1990, condition: good (used), This haul-off saw, manufactured by Battenfeld Extrusionstechnik GmbH, is stored in the machine store of Plastima Used Machinery. The machine was made in the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: SAW MODELL SU630P Year of construction: 1990 Voltage: 380 V Power: 6,25 kW Pipe diameter max: 110 mm to 630 mm Nsdpfx Ahetpnbuozslb

Year of construction: 2017, condition: used, Breyer Co-Extruder 45mm for EVOH and LDPE (2017) 1350mm(30D) working length Nedpfey Uxk Djx Ahzelb 128rpm screw speed 5 heating zones 7.4kW heating power 400°C max. temp. cylinder and outlet 350bar max. melt pressure 2152/1104/1956mm dimensions L/W/H (without hopper) 820kg weight Comprising Drive unit Knoedler 17kW Please note the items in this lot 29381-58 are simultaneously offered in the combination lot 29381-35 as a complete cell. The separate parts of the complete cell 29381-35 are offered as individual lots 29381-41, -48, -49, -51, -58, -66, -67, -70, -72, -74, -79, -82, -83, -84, -89, -92, -93, -95, -96, -100, -101, -103, -106, -110, -112, -113, -115, -116, -118, -121 Bidders can bid on the complete cell and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the cell either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2014, condition: used, Breyer Extruder 105mm for HDPE Master batch (2014) 285kg/h approx. max. output 3780mm (36D) working length 64rpm screw speed 8 heating zones 52kW heating power 150°C max temp. feeding zone 400°C max. temp. cylinder and outlet 350bar max. melt pressure 5400/1181/1702mm dimensions L/W/H (without hopper) 4500kg weight Nlodpfx Ajy Ulwqjhzjb Comprising Metal separator SIS Tempering unit Regloplas P160M (2017) Drive unit Knoedler 112kW Screen changer Nordson Kreyenborg D-SWE-152 Please note the items in this lot 29381-71 are simultaneously offered in the combination lot 29381-36 as a complete cell. The separate parts of the complete cell 29381-36 are offered as individual lots 29381-39, -40, -42, -45, -46, -47, -50, -53, -55, -59, -62, -64, -71, -75, -77, -78, -81, -85, -86, -87, -88, -91, -94, -97, -98, -104, -108, -111, -114, -120 Bidders can bid on the complete cell and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the cell either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2017, condition: used, Breyer Extruder 120mm for HDPE regrind (2017) Nodpfx Ahsy Ulk Dezolb 600kg/h approx. max. output 4800mm (40D) working length 86rpm screw speed 8 heating zones 57.6kW heating power 150°C max temp. feeding zone 400°C max. temp. cylinder and outlet 350bar max. melt pressure 6460/1181/1702mm dimensions L/W/H (without hopper) 6000kg weight Comprising Metal separator SIS Tempering unit Regloplas P160M (2017) Drive unit Knoedler 238kW Screen changer Nordson Kreyenborg K-SWE-180 Melt pump Nordson BKG Bue Flow GPE 90/90-01 Please note the items in this lot 29381-70 are simultaneously offered in the combination lot 29381-35 as a complete cell. The separate parts of the complete cell 29381-35 are offered as individual lots 29381-41, -48, -49, -51, -58, -66, -67, -70, -72, -74, -79, -82, -83, -84, -89, -92, -93, -95, -96, -100, -101, -103, -106, -110, -112, -113, -115, -116, -118, -121 Bidders can bid on the complete cell and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the cell either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2014, condition: used, Cannon/Breyer Combined extrusion thermoforming line (2014) for producing of continuous 6-layer PE plate to thermoform automotive tanks 1500x1600mm max. plate size 500 x 500mm min. plate size to be processed 10mm max. plate thickness Njdpfxjy Ulige Ahzelb 4,0mm min. plate thickness 24kg approx. max. plate weight (at 1600x1500x10 mm) 700mm approx. processing height 1.100 to 1.170 kg/h max. capacity - approx. 27 tanks per hour Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling PLEASE NOTE: Tooling/moulds and any product related gripping tools are not included! Combination Lotting: The complete Line CET 1 is lotted as a single combination Lot 29381-36 Its components are simultaneously offered as individual Lots 29381-39, -40, -42, -45, -46, -47, -50, -53, -55, -59, -62, -64, -71, -75, -77, -78, -81, -85, -86, -87, -88, -91, -94, -97, -98, -104, -108, -111, -114, -120 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2007, condition: excellent (used), LÜERS PP-PIPE BELLINGMACHINE 3 SOCKETS PER CYCLE With ring insert device Type: MU110-3/2-48-06 Built in 2007 Application: PP HT pipes from 32 mm to 50 mm Application: PP HT pipes with diameters from 32 mm to 50 mm Min. diameter HD 32 mm Max. diameter HD 50 mm 3 sockets per cycle Tool: 1 set for HT DN 50 mm PP pipes The Bellingmachine is in very good working order Condition: very good The machine is my property. Nsdpfx Ahey Agrfezelb Hablamos español Nous parlons français We speak English

Year of construction: 2020, condition: new, functionality: fully functional, Single Screw Extruder Screw diameter: 25mm / 25 LD Motor 2,2 kW Die Head available Nlodpfofw Rigsx Ahzeb Feeding system available waterbath and pelletizer available Visit and Trial possible.

Condition: refurbished (used), functionality: fully functional, Extrusion Screen Changers - Continuous Screen Changers Double Piston Filter - - Immediately available, on request also with control, hydraulic unit. When making your request, please let us know your desired capacity and the material so that we can offer you the right filter. Nodpfx Ahoh Itl Sszelb

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order Nledpfx Ahot Rcn Njzob The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, Extrudex single-screw extruder Technical data: Throughput: 300-500 kg/h depending on input material Year of manufacture: 1995, but completely overhauled in 2018 and as good as new since then Scope of supply: Extruder Nljdpfx Ahjyrn Rtozjb Complete control system Screen changer "Kreyenborg" K-SWE 150 Water bath Strand die Vibrating screen (classifier) smaller peripheral devices For an additional €3,000, a strand pelletizer is available.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition Nlsdpoycuuyjfx Ahzsb For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 2011, condition: excellent (used), SÄGE SICA TRS/C/SY/U/CNC. 32-250 , PLANETARY TUBE SAW Central clamping for pipe fixing Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 32mm Max diameter 250mm Year of construction 2011 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Nlsdsyru Eqspfx Ahzeb Bahnhofstrasse 6 The machine is my property.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm Nledpoy A H Umofx Ahzjb • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder i Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Nlsdpfx Aoy At N Rshzeb Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Condition: reconditioned (used), functionality: fully functional, Stock No.: 2858 1 used, partially overhauled and function-tested compounding and pelletizing line, consisting of: Extruder Berstorff (Krauss Maffei) Type ZE 60 A - 34 L/D twin-screw co-rotating Extruder drive 160 kW AC Degassing with vacuum pump Laser cutting head / melt filter Melt pump Eprotec Melt x10 ECON EUP 600 underwater pelletizer, complete with start-up valve water system granulate drying centrifuge >> 1 year PLASTICO warranty Nodpfx Ahoy At Iaszjlb OPTIONAL for an additional charge: Material conveying system Gravimetric dosing units Granulate classification Pellet filling station for Big Bags or Octabins Additional compounding plants, pelletizing systems, gravimetric dosing units available from our Wuppertal facility. Visit us or send us your enquiry.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Nsdpfx Aheiyyndozolb > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW Njdpfx Aeh Eyd Aohzjlb ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, Nljdped Sg Hrsfx Ahzjb equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: reconditioned (used), machine/vehicle number: 2586k, No.: 2586k 1 used, functionally tested and operating compounding-pelletizing line, equipped with : Extruder twin-screw COMAC Type EBC 68 with Motor 110 kW-DC screws 2x Ø 68 mm – 40 L/D co-rotating intermeshing Segmented screws & cylinders, Water / Medium cooled 1x venting port 1x side feeder screws 2x Ø 52 mm Melt-filter 2 piston Type K-SWE 160 incl. Hydraulic-pack BKG underwater-pelletizing unit Type AH 2000, complete with: diverter-valve / Hydraulic pelletizer with motor 4 kW incl. die-plate and knife-holder Water – Box TWS volume 900 liter, heating power 40 kW Installed Water pump with 11 kW, By-Pass-System Nodpfx Asd H S U Ujhzslb Pellet Spin-dryer TVE 2000 ED with motor 4 kW water sieve with circulation pump 4 kW Siemens S7 – Touch control board More extruders / recycling - and compounding lines ex our stock Wuppertal-Germany available, as: pelletizing systems, dosing & blending, screen-pack-changer, pellet classification, granulating and many more. Ask for our most recent stock-list or visit us in Wuppertal-Germany. You´re welcome.