Used hydraulic presses double column / Four column presses for sale (308)

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m Phjdpsvuuhmsfx Ah Uoa permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Year of construction: 1984, condition: used, pressure 100 t distance between columns 1000 mm stroke 150 mm Podpfx Ahofn Apzo Ujha table surface area 1000 x 700 mm distance table/ram 500 mm die cushion stroke 180 mm ram surface 1000 x 700 mm ram drills x depth 50 mm no. of strokes 85 Hub/min tool shank hole (depth x diameter) 85 x 50 mm clamping slots 22 DIN 650 form diagonal number of clamping slots 2 sheet width 400 mm plate length 1000 mm dimensions of the machine ca. 3,0 x 3,0 x 3,0 m weight of the machine ca. 8 t total power requirement 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped

Condition: as good as new (ex-display), Year of construction: 2023, Technical data PDM100R-5393 Capacity [Tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 DIMENSIONS OF TOP PLATE [mm] 850x550 GUIDING COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. OPENING [mm] 600 STROKE [mm] 420 Pedpfx Ahsq Ula Ro Ueha FREE RUNNING SPEED [mm/s] 50-230 WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER - PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce productivity and reduce energy consumption by up to 80 during downtime, tool changes and between cycles. cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD light barrier technology - 12" LCD display - Configurable working parameters on PLC. - 50 pre-stored programs available on PLC. - Prefilled valves for fast speeds - Maintenance-free bronze graphite bushes. - Simplified hydraulic unit to reduce maintenance maintenance work.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 6,000 mm, installation height: 1,000 mm, total width: 2,400 mm, total length: 3,500 mm, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, overall weight: 45,000 kg, oil tank capacity: 1,200 l, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Toolmaking Press for Tool and Forming Technology The machine is a tryout/tool tryout press designed for tooling in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. The press features a robust 4-column design, a spacious working area, and a hydraulic unit equipped with REXROTH pump technology. Control is managed via a SIEMENS S7-1200 with touch panel and extensive parameterization options. Scope of Delivery & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roll stand / support console 10 t (GÜTHLE) - 4-channel tool holder system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Condition of the Machine - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electricals in good condition - Mechanically sound, no visible damage - The machine is assembled and can be demonstrated under power. Press Force: - Rated force: 500 t - Max press force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions (approx.): 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working Area: - Table size: 2000 × 1500 mm - Internal column spacing: 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measuring system) - T-slots (mounting defined by the customer) Hydraulic System: Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1200 L - Oil system: 1000 L capacity Speeds: - Approach stroke: 120 mm/s - Return stroke: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: Control: - SIEMENS S7-1200 + ET200S - 12" touch panel Schneider Electric Operating Modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep drawing mode with die cushion Measurement & Safety Features: - Linear measurement system Novatechnik (63 Bit) for slide and die cushion - SICK safety light curtains front and rear (height: 1050 mm) - Side safety fencing with limit switches - Remote maintenance via Ethernet possible - Mobile operator panel International Notice Block (DE/EN) German: Dismantling, deinstallation, loading and transport are exclusively the responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection only after prior appointment. English: Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany Phedpfjx D Tv Dox Ah Uoa

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Condition used description Phodpfxeudb Hcs Ah Uja Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 630 t, table width: 1,800 mm, table length: 1,600 mm, overall weight: 80,000 kg, Equipment: safety light barrier, Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Podpjv E N Rqofx Ah Ueha Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2006, pressure 250 t distance between columns 3000 mm stroke 600 mm Pjdevuuhaepfx Ah Uoha Distance table/ram, stroke up 900 mm Table surface area 2500 x 1300 mm Table height above floor 1050 mm Side window 1350 mm Ram surface 2500 x 1300 mm Speed down 500 mm/s Speed up 400 mm/s Working speed 36 - 64 mm/s Oil volume 2700 l Power capacity 137,0 kW Weight 54,0 t Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Year of construction: 1981, condition: used, pressure 40 t distance between columns 600 mm stroke 160 mm table-size 560 x 400 mm dayligth 360 mm ram hole 40 H 7 DIN 810 mm oil volume 500 l return speed 200 mm/sec die cushion hydr. pressure/stroke 60 capacity of ejector 25 t total power requirement 15 kW dimensions of the machine ca. 1.44 x 0.95 x 2.54 m pressing speed 27 mm/sec return speed 200 mm/min Psdpfx Ahob U Hw To Ueha

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 2269, total height: 2,700 mm, table height: 900 mm, installation height: 300 mm, total width: 1,500 mm, total length: 1,700 mm, pressing force: 80 t, table width: 400 mm, table length: 400 mm, operating speed: 300 mm/s, overall weight: 2,600 kg, reverse speed: 180 mm/s, distance table to ram: 300 mm, type of input current: three-phase, stroke length: 180 mm, oil tank capacity: 200 l, input voltage: 400 V, pressing speed: 15 mm/s, Equipment: documentation/manual, safety light barrier, The press was retrofitted in 2010 in accordance with the latest safety regulations. Podpfxexyx Abj Ah Usha

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm stroke 310 mm Phsdoxvdr Hjpfx Ah Uja weight of the machine ca. 3500 t

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Returningspeed: 9,06 mm/sec Psdsxc Rbbopfx Ah Uoha

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Pedpfx Ahsgbvkvs Uoha Floorstanding Sick lightguards Die cushion: 200mm stroke

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm Phsdpjvuugvofx Ah Usa die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F

Year of construction: 1980, condition: used, pressure 100 t distance between columns - mm stroke 350 mm Pjdpfxjdlxcto Ah Ueha table size 1150 x 700 mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m - cutting impact dampening - die cushion - without electrical cabinet

Condition: refurbished (used), Year of construction: 1979, functionality: not functional, machine/vehicle number: 2374, total height: 2,800 mm, table height: 900 mm, installation height: 430 mm, total width: 1,600 mm, total length: 1,200 mm, pressing force: 100 t, table width: 580 mm, table length: 450 mm, operating speed: 180 mm/s, overall weight: 4,200 kg, reverse speed: 180 mm/s, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, type of input current: three-phase, stroke length: 150 mm, oil tank capacity: 380 l, input voltage: 400 V, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Phodpfxexyxx Ae Ah Usa

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, 40T H-Frame Press with Ram Table • Press capacity: 6-40 T (adjustable) Phjdpfx Ahexrby Ho Uja • Maximum installation height: 700 mm • Usable area, lower table: 1000 x 600 mm • Usable area, ram: 1000 x 600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 pcs, at the corners) • Table height from floor: 800 mm • Overall dimensions approx. (W x D x H): 2,100 x 1,600 x 3,500 mm • Total weight approx.: 3,500 kg • T-slots and drill holes made to customer specification. HYDRAULIC CYLINDER: • Piston stroke: 0-500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 pc) • Piston rod diameter: Ø 80 mm (1 pc) • Max. operating pressure: 260 bar • Return speed: 90 mm/sec • Ram speed: 9 mm/sec • Idle speed: 80 mm/sec HYDRAULIC UNIT: • Hydraulic pump (brand: ASC): 67+8 L/min (1 pc) • Motor power: 4 kW (1 pc) • Pressure accuracy during pressing stroke: +/- 5 bar • Hydraulic unit is mounted at the rear upper section of the press. • Hydraulic manifold and valves by DUPLOMATIC. • Manometer for pressure display. • Air filter and oil filter brand: FILTREC. • Equipped with an electronic oil level switch. • Air cooling (cooler) is used for hydraulic cooling. • Pressure adjustable via pressure switch. • Control via sensor. • Safety cover (door) located at the rear of the press. • Safety light sensors and internal lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic unit main motor connection: 4 kW • Total power supply: Approx. 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Mode selector switch: Yes (lockable) • Electrical equipment brands used: SIEMENS, ALLEN BRADLEY, SICK.

Condition: good (used), Year of construction: 1991, For sale is our Hydrap 160 ton press with decoiler (year of manufacture: 1999) / straightening machine (year of manufacture: 1999) / feed unit (2004). The system is only available as a complete package. Operating hours: 20,242. Condition: good. Inspection possible and encouraged. Location: Szügy, Hungary. We will be on company holiday from 19.12.2025 to 06.01.2026. From 07.01.2026, we will be available for you again. Phodpetu Szljfx Ah Uja

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Podpfx Aoxr Ay Uoh Ujha

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Psdpfx Ahjvuudzj Ueha Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Condition: ready for operation (used), passage width: 780 mm, power: 30 kW (40.79 HP), empty load weight: 11,000 kg, load capacity: 450,000 kg, Doorgang tussen de staanders: 780 mm Maximale ramverstelling: 800 mm Afstand tussen tafel en ram: 1200 mm Tafeloppervlak: 1200 x 780 mm Elektromotor: 30 kW Gewicht: 11 ton 4-koloms hydraulische pers hoge sluitsnelheid ideaal voor composietprojecten de pers kan langdurig onder druk staan één enkelwerkende hydraulische hoofdzuiger twee kleinere zuigers om de stempel terug te trekken verwarming kan optioneel gebruikt worden (aan/uit) Max ram adjustment: 800 mm Phedpfx Ahoxb E E Ee Uoa Distance between table -- ram: 1200 mm Table area: 1200 x 780 mm

Condition: refurbished (used), Year of construction: 1971, functionality: not functional, machine/vehicle number: 7/2118, total height: 4,800 mm, table height: 950 mm, installation height: 800 mm, total width: 2,500 mm, total length: 1,800 mm, pressing force: 100 t, table width: 1,000 mm, table length: 870 mm, operating speed: 400 mm/s, overall weight: 10,800 kg, reverse speed: 300 mm/s, ram plate width: 1,000 mm, ram plate length: 870 mm, distance table to ram: 800 mm, type of input current: three-phase, stroke length: 500 mm, oil tank capacity: 800 l, input voltage: 400 V, pressing speed: 50 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Psdpexyxrijfx Ah Uoha

Condition: as good as new (ex-display), Year of construction: 2021, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements Phjdpfx Ahjhyc Nwo Uea o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Pjdpfx Ahsxwdrve Ueha Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m permitted for manual loading according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, hydraulic cutting impact cushioning with motoric adjustable depth stop, ram interlocking, two-hand operation as is where is, WITHOUT putting into operation in our warehouse

Condition: refurbished (used), Year of construction: 1984, functionality: not functional, total height: 6,100 mm, table height: 1,100 mm, installation height: 1,400 mm, total width: 4,800 mm, total length: 2,700 mm, pressing force: 250 t, table width: 1,400 mm, table length: 1,000 mm, operating speed: 300 mm/s, overall weight: 21,500 kg, reverse speed: 150 mm/s, ram plate width: 1,400 mm, ram plate length: 1,000 mm, distance table to ram: 1,400 mm, type of input current: three-phase, stroke length: 1,000 mm, oil tank capacity: 1,500 l, input voltage: 400 V, pressing speed: 18 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for proper function. It will be fitted with a new hydraulic safety block that complies with the latest safety standards. A completely new electrical system and PLC control, including a front safety light curtain, ensure that the press is almost in as-new condition. Phsdpfxjxywigj Ah Uea

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm Podpjvuucqjfx Ah Ueha pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading