Used hydraulic presses double column / Four column presses for sale (307)

Condition: good (used), pressure 250 t Ibodjxcblwepfx Ah Ujf passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW Ibodsh Agnuspfx Ah Uef

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Iedpfx Asup Skwoh Usbf Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: good (used), Pressing force 200 to table: 1500x1000 mm motor: 45 kW weight: 18000 kg Stand width:1500mm Ibsdpfxegvz Hxs Ah Usf dimensions: Machine: 5500x2610x2150 mm

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm Iodpfoq Nipyox Ah Uebf 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: ready for operation (used), Maximale druk: 250 ton Tafelafmetingen: 620 x 600 mm Tussen kolommen: 620 mm Maximale opening: 500 mm De onderste en bovenste tafels zijn verwarmd Maximale temperatuur: 200° C Hydraulische motor 5,5 kW (11 ampère) Elektrisch gezekerd 100 ampère Hoogte: 2600 mm Gewicht: 6 ton Iedpowlkxhsfx Ah Uobf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 65056, pressing force: 5,000 t, table width: 4,520 mm, table length: 2,150 mm, overall weight: 319,000 kg, stroke length: 900 mm, Equipment: safety light barrier, Pressure build-up time: 3.6 s Ibodpfx Ahsxb Tplo Ujf Pressure relief time: 1.5 s 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Tool change device Mesh safety enclosure with light curtains

Condition: like new (used), Year of construction: 2023, functionality: fully functional, pressing force: 40 t, table width: 1,500 mm, table length: 1,000 mm, reverse speed: 10 mm/s, ram plate width: 1,500 mm, ram plate length: 1,000 mm, type of input current: AC, travel distance X-axis: 1,200 mm, power: 9 kW (12.24 HP), Equipment: safety light barrier, If the press does not exactly meet your requirements, please click here to request a customized quotation tailored to your needs: HIDROBRASIL manufactures presses to your exact specifications at surprisingly competitive prices! ##### Mould opener-closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Technical data: Pressing force: 40 tons Maximum open height: 1800 mm Ram travel: 1500 mm Oil temperature monitoring: Electric air cooling Ibodpfxetwmp Se Ah Ujf Lubrication: Manual via grease nipple Travel of the extending table: 1200 mm Speed of the extending table: 30 mm/sec. Electrically steplessly rotatable ram: 180 degrees T-slots: According to customer requirements Pressure setting: From 10 tons to 40 tons Monitor: 10" on the control cabinet for pressure setting and warning messages Two-hand operation Special features: Insulation of the clamping plates towards the ram: With resin insulation plate and special ventilation plate Hydraulic system: With BOSCHREXROTHPARKERATOS components Safety components: From SICK Control system: SIEMENS Remote maintenance unit: SECOMEA - Ethernet Installation and operating conditions: Maximum ambient temperature: 40 °C Height above floor (overall height): Approx. 3800 mm Total weight of the press without operating materials: Approx. 13 tons This machine is supplied in the colors requested by the customer and complies with all EU legal requirements and standards. ##### Are you looking for a customized machine? Contact us for a customized offer.

Condition: used, Year of construction: 1992, functionality: fully functional, installation height: 700 mm, pressing force: 250 t, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, stroke length: 400 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm ram stroke: 400 mm Iedpjup Si Hsfx Ah Ujbf Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, machine/vehicle number: 12469, Hydraulic press, two-column press, oil hydraulic press -Press force ram: 65 to -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. Insertion height: 295 mm -Max. Width: 300 mm -Max. Stroke: 220 mm Ibodeb I Dqaspfx Ah Uof -with safety cage -Max. Feed speed: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Iodpfx Ajhktq Ash Uebf Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: ready for operation (used), total height: 5,500 mm, total width: 1,500 mm, total length: 1,500 mm, passage width: 1,000 mm, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, load capacity: 1,000,000 kg, 4-koloms hydraulische pers hoge sluitsnelheid ideaal voor composietprojecten de pers kan langdurig onder druk staan één enkelwerkende hydraulische hoofdzuiger (diameter 660 mm) twee kleinere zuigers om de stempel terug te trekken verwarming kan optioneel gebruikt worden (aan/uit) is boven de grond geïnstalleerd! gat in tafel voor tegendruk (slag 200 mm) Rexroth hydraulische unit 300 bar werkdruk Capaciteit: 1000 ton Doorgang tussen staanders: 1000 mm Maximale ramverstelling: 800 mm Afstand tussen tafel en ram: 1400 mm Tafel: 1200 x 1000 mm Vermogen: 55 kW Lengte: 1500 mm Diepte: 1500 mm Hoogte: 5500 mm Gewicht: 25 ton Isdpfsv Sfp Nex Ah Uebf

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm Ibjdpfx Aeg S R Twoh Ujf table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: as good as new (ex-display), Year of construction: 2020, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) Ijdpfsg Iihwsx Ah Uebf o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 Iodpfx Aew A Amrsh Uobf - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Hydraulic press, single column high-speed cycle press, C-pillar press, oil hydraulic press -Pressing force ram: approx. 35 to -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Inlay width: 275 mm -Dimensions: 1300/900/H3200 mm -Machine can be dismantled to: H2700 mm Ibsdeb A Nkbepfx Ah Ujf -Weight: approx. 1500 kg

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons Ibjdpfx Ahegrnaqs Uef

Condition: ready for operation (used), Paneelpers met 2 verwarmde tafels Tafelafmetingen: 3200 x 1700 x 50 mm Tussen kolommen: 1700 mm Maximale afstand tussen tafels: 150 mm perssnelheid: 1,4 mm/sec retoursnelheid: 105 mm/sec sluitsnelheid: 105 mm/sec Iodpfx Ahjwaitys Uebf 6 zuigers - diameter van de zuiger: 200 mm - slag: 150 mm Gewicht: 19 ton Furnierpressen - Transportpers - Composietpers - Heizplattenpressen

Condition: ready for operation (used), Year of construction: 1998, pressing force: 250 t, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, stroke length: 150 mm, power: 37 kW (50.31 HP), Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Ibjdpfxery Trpj Ah Uof Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: as good as new (ex-display), Year of construction: 2020, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Iedpfx Aohmbhqjh Usbf Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm Ibsdpfx Ahodzp Tce Uof column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,769 h, functionality: fully functional, machine/vehicle number: H/7529, pressing force: 500 t, table width: 2,400 mm, table length: 1,300 mm, stroke length: 800 mm, TECHNICAL DETAILS Ibjdpfswa S R Iex Ah Usf Press force: 500 t Table area: 2,400 x 1,300 mm Pedal area: 2,400 x 1,300 mm Stroke: 800 mm Max. stroke length: 830 mm Control system: Siemens S7-400 Installation height: 400 mm/min Working speed: 25 - 60 mm/s Closing speed: 500 mm/s Rapid traverse up: 450 mm/s Mold base area: min. 1,400 x 900 mm Mold base area: max. 2,300 x 1,200 mm Mold weight: max. 3,000 kg MACHINE DETAILS Weight: 83,000 kg Power: 255 kW Rated current: 435 A Voltage: 400 V Frequency: 50 Hz Hydraulic pressure: 255 bar Oil volume: 3700 l

Condition: like new (used), Year of construction: 2019, pressure:400 t stroke:900 mm Ibedpfx Ahjfh Izme Uof Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ibjdpfjdzqptsx Ah Uof Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, Hydraulic 500 T Gantry Straightening Press Ibjdpjwgakvefx Ah Ujf with tool clamping device and parallel support for the bending blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec c) Table size 2000 x 850 mm d) Open height 1500 mm e) Overall size approx. LWH 1500 x 3000 x 4300 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table with grid design i) Remote control j) Pressure adjustment from 80 T to 500 T via rotary dial k) Table moves hydraulically outward 700 mm for loading l) Cylinder moves left and right via racks m) Machine body powder-coated or double-coated n) T-slots according to customer requirements o) Cylinder induction-hardened p) Assembly, commissioning, and instruction are charged separately. Press type: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 Forces Max. press force: 5,000 kN Max. free tear-off force: 800 kN Pressure build-up time: Closed tool, steel on steel: Max. 3 seconds Dimensions Max. opening width: 1,500 mm Stroke and min. opening: 1,300 mm/200 mm Table height above floor: approx. 850 mm Height above floor (overhead height): approx. 4,300 mm Hall height: min. 5,000 mm Deflection Determined at max. closing force with 70% occupancy: < = 1.2 mm/m Weight Total weight of the press without operating materials and table top: approx. 25 t Speeds Quick closing with 17 mm sec. Pressing speed at F max.