Used hydraulic single column presses over 125t for sale (39)

Condition: new, machine/vehicle number: DF0189, pressure:500 t passage width:1200 mm stroke:400 mm Hjdpfefxykasx Agwepa weight of the machine ca.:40 t dimensions:2800 x 1750 x 4350 mm return capacity:50 t :50 kW Max Working height:800 mm :0 - 10 mm :0 - 10 mm/sec. :400 mm pestle plate:1000 x 1000 mm table plate:1200 x 1200 table height over floor:1200 mm :700 l

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), Hsdpfxjw S Uazs Agwopa - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Year of construction: 1989, condition: ready for operation (used), machine/vehicle number: K 1283, A used bending machine from the manufacturer HMK. The pressing power up to 500 t Year of construction: 1989 Machine number: 1283 Hedpjd Eg R Tefx Agwjpa

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN CNC Back Gauge Quick Change Tooling Hpjdpfx Agslqwvkjwoa

Condition: good (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2089, total height: 5,000 mm, table height: 1,000 mm, total width: 3,000 mm, pressing force: 250 t, overall weight: 25,000 kg, MIB BRAND HYDRAULIC PRESS YEAR 01/2000 Hpjdpfov Hbh Rox Agwoa CAPACITY 250T MACHINE TO BE RESTORED, COMPLETE

Condition: like new (used), functionality: fully functional, total height: 3,500 mm, total width: 2,400 mm, total length: 1,000 mm, throat depth: 500 mm, pressing force: 300 t, table width: 1,000 mm, table length: 700 mm, operating speed: 14 mm/s, overall weight: 13,500 kg, reverse speed: 265 mm/s, working height: 1,100 mm, working range: 800 mm, pressure: 290 bar, Equipment: documentation/manual, safety light barrier, Power 300 TN Motor power 30 kW Throat depth 500 mm Working speed variable 14.9 to 9 mm/s Approach speed 178 mm/s Return speed 265 mm/s Maximum pressure 290 bar Stroke of piston 500 mm Lower table size 1,000 x 700 mm Upper table size 800 x 600 mm Max. vertical clearance 800 mm Working height 1,100 mm Total front 10,000 mm Total side approx. 2,400 mm Total height approx. 3,500 mm Hpedpfxswpf S Do Agwoa Weight approx. 13,500 kg.

Year of construction: 1974, condition: used, machine/vehicle number: 82, Hydraulic frame press for sheet metal stamping with a force of 630 tons, designed for cold stamping. The vertical frame press with a welded construction consists of a table and an upper plate that are connected with screws. An electrical cabinet is installed next to the press and an oil overflow tank is located deep in the foundation, which facilitates filling the press system with oil. The pressing units are removable, which makes their assembly and repair easier. The press is controlled with a button. The size of the slider stroke is ensured by adjusting the position of the end stop. 1. Nominal pressing force, tone 630 2. Rated working pressure of fluids, KN/cm 2,200 3. Slide stroke, mm 750 4. Slider speed, mm/s a) at idle speed 215 b) during the working stroke 10 c) during the return stroke 120 5. The greatest distance between the table and the slider, mm 1400 6. Distance between posts, mm 2200 7. Table dimensions, mm a) from left to right 2220 b) front to back 1800 8. Thickness of stamping plate, mm 220 Hedpfopgkt Sex Agwopa 9. Table height above floor level, mm 410 10. Nominal force of the hydraulic washer, tf 250 11. Hydraulic cushion stroke, mm 350 12. Ejector speed, mm/s a) when going up 51 13. Press size, mm a) from left to right 5070 b) front to back 3000 c) height 7065 14. Press height above floor level, mm 5480 15. Weight of the press, kg 69400 Electric motor revolutions 1450 min-1 Operating voltage 400/230 V Mains frequency 50 Hz ± 1% Rated air pressure 0.7 Pa

Condition: reconditioned (used), NR.01 Hydraulic press with 3 cylinders BIGNOZZI Power 200 Ton Completamete reconditioned Table 1550 x 1050 mm Recess mm 1000 Hjdpfx Aohnc R Isgwepa Piston stroke mm 500 Platen height 1180 Dimensions 2900 x 1700 x 2900 ( h) Weight Ton 10

Condition: excellent (used), Year of construction: 2021, operating hours: 50 h, Machine for sale in good condition it has low operating hours. Hpodpfsxbb Hrjx Agwea

Year of construction: 2023, condition: new, Pressing force 150to Siemens PLC Hedpfx Ajkyu Hvjgwepa hydraulics Bosch/Rexroth stroke 400mm table area 600mm x 800mm

Condition: like new (used), functionality: fully functional, pressing force: 400 t, table width: 2,000 mm, table length: 1,000 mm, operating speed: 106 mm/s, reverse speed: 125 mm/s, stroke length: 750 mm, pressing speed: 12 mm/s, Equipment: safety light barrier, HYDRAULIC C-FRAME PRESS FOR RAILWAY RAIL STRAIGHTENING We are offering a new/replica version of this press. The press will be placed on sale by the customer in the second or third quarter of 2026 due to the project's extension. The CF-400E/NC hydraulic press belongs to the CF/NC series and was specifically designed for railway rail straightening. Equipped with an upper and lower table made of machined C45E steel with DIN 650 grooves. It uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements according to CE regulations. TECHNICAL DATA Press force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Push plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The gooseneck structure is electro-welded and made entirely of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The upper table ensures perfect alignment with four 80 mm diameter lateral cylindrical guides equipped with maintenance-free bimetallic bushings. CYLINDERS AND HYDRAULIC GROUP • Single-acting main cylinder with jacketed barrel, chrome-plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with chrome-plated pistons and wear-resistant guides, enabling fast start-up and return speeds. • Includes two independent hydraulic safety blocks. Hpedpfx Aowkv A Negwea • Motorized hydraulic group with pre-fill valve for forward and reverse flow. Constant power, variable flow pump. • Equipped with a directional control valve, a pressure relief valve, a decompression valve, and an air-oil cooling system. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 CONFORT, located in the control cabinet. It allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. It has a memory capacity of 300 recipes, with each recipe capable of programming all previous values. • Electrical and hydraulic maneuvers are redundant and self-controlled. It includes an additional safety block and self-checking devices for maneuvers and safety. It includes verification and certification of correct operation and the safety distance for photocells. • Operation is via a low-voltage electric pedal. • For safety, lasers and work area protection with Category IV photoelectric barriers are integrated.

Year of construction: 1992, condition: used, machine/vehicle number: 530, The STEINER hydraulic press was manufactured and developed with practical aspects in mind. The hydraulic device is located on the hydraulic tank behind the press. Control blocks and valves are easily accessible from the outside and can be quickly replaced if necessary. The hydraulic radial piston pump is located on the drive console and is connected to the motor and pump mount via a coupling. The press stand is indestructible and torsion-resistant Sthal welded construction. The ironing board is screwed to the stand. The hydraulic cylinders are screwed to the press stand from above and guided through the mounting holes in the appropriate direction. The piston is connected to the piston rods via a wear ring. Four-sided, diagonal, flat grooves on the stand allow for very precise movement. Hpodpspgktcefx Agwea Hydraulic cylinders are made of high quality material and are designed for high pressures. The piston rods are ground and hard chrome plated. The cylinder tubes are honed from the inside. Seals that have been maintained over many years are characterized by high quality and tightness. The piston rods are guided by guide bands, which are characterized by very low abrasion and a long service life. The control, control and monitoring devices for all control devices are installed in the control unit. Mutual locks ensure that no two program processes can run at the same time. The electrical control is located in a closed control cabinet. Pressing force - 8000 kN Operating pressure - 285 bar Installation height - 850 mm Stroke - 250 mm Table surface - 1550 x 1450 mm Ram surface - 1550 x 1450 mm Stand passage - 1800 mm Lateral Breakthrough in the stand on the right and left Width x height - 1300 x 1075 mm Table top thickness - 155 mm Width of the machine approx. - 3100 mm Depth approx. - 4300 mm Height approx. - 4660 mm Table height above hallway - 500 mm Table height under hallway - 755 mm Drive power - 55 kW Oil requirement approx. - 1400 liters Total weight approx. - 60 tons

Condition: like new (used), functionality: fully functional, total height: 3,250 mm, total width: 3,650 mm, total length: 6,000 mm, pressing force: 400 t, table width: 2,520 mm, table length: 6,000 mm, operating speed: 3 mm/s, overall weight: 28,500 kg, reverse speed: 18 mm/s, pressure: 319 bar, power: 11 kW (14.96 HP), The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Approach Speed mm/s 10 Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY Hjdpfx Agjwpgmvswspa • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device.

Condition: like new (used), functionality: fully functional, machine/vehicle number: HV-300NC, total height: 1,840 mm, table height: 950 mm, total width: 3,200 mm, total length: 2,500 mm, pressing force: 300 t, table length: 750 mm, operating speed: 10 mm/s, reverse speed: 15 mm/s, stroke length: 450 mm, pressing speed: 2 mm/s, Equipment: documentation/manual, TECHNICAL DATA: Pressing force: 300 t Hodpfowk Hkqex Agwepa Motor power: 7.5 kW Throat: 405 mm Working speed: 2 mm/s Approach speed: 9.9 mm/s Return speed: 14.7 mm/s Maximum pressure: 320 bar Piston stroke: 450 mm Support table: 2,500 x 750 mm Guide diameter: 60 mm Main table: 750 x 750 mm Max. daylight between tables: 900 mm Working height: 950 mm Support blocks: 150 x 150 x 750 mm Total length: 3,200 mm Total width: 2,500 mm Total height: 1,800 mm Weight: 13,300 kg DESCRIPTION: Our HV/NC series horizontal hydraulic straightening presses are available with three different pressing forces, ranging from 150 to 300 tons. Horizontal hydraulic presses are specially designed for straightening and bending profiles, bars, and beams. Thanks to the horizontal design of the machine, large beams and profiles can be processed with ease. The latest generation HV/NC series horizontal hydraulic press has become a versatile machine capable of accommodating a wide variety of tooling options. STRUCTURE AND TABLES The HV/NC series horizontal hydraulic straightening presses consist of a C-frame, fully electro-welded structure made exclusively from S355JR steel. After welding, the structure is stabilized and machined to ensure perfect parallelism and precision. The frame is calculated and built using finite element analysis software. All of this ensures our consistently high standards in robustness, precision, and quality. The presses are equipped with a main sliding table and a rear support table made of high-strength steel, both fitted with DIN 650 T-slots. Support blocks made from C45E steel are supplied as standard. The main table guarantees perfect parallelism through four cylindrical guides featuring maintenance-free, frictionless bimetal bushings. Each side is equipped as standard with two height-adjustable roller supports. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder made from seamless, cold-drawn tubing, with a chrome-plated piston and maintenance-free, wear-resistant guides. The motorized hydraulic power unit features two speeds and automatic disengagement of high speed. Includes cylinder decompression valve. ELECTRICAL INSTALLATION AND SAFETY The machine is equipped with a SIEMENS safety PLC, SIMATIC S7 1200 type, and a 4-inch MTP-400 touchscreen located above the electric foot pedal. This allows programming of operating modes in semi-automatic and automatic, power setting, stroke, and dwell time of the upper cylinder. The system has a storage capacity for 99 recipes, with all parameters configurable for each recipe. The electric control panel is equipped with a selector switch for manual or automatic operation, as well as a key switch for maintenance operations. Both electrical and hydraulic circuits feature redundant and self-monitoring controls. An additional safety block and self-monitoring devices for actuation and safety are integrated.