Used Hydraulic presses single column for sale (73)

Year of construction: 1990, condition: as good as new (ex-display), Eckolt hydraulic press in mind condition executed with plate holder Iodpfx Aged Siacs Netn see pdf for technical specs

Condition: used, Year of construction: 1992, pressure 75 t Itjdpfx Agst Hwrzs Njn throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m

Condition: good (used), JDS hydraulic press Bed: 505 x 510 mm Dimensions: 140x140x285 cm LxWxH Itedpoiki Ahjfx Ag Njn

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Ijdpfx Aov Rwu Usg Netn Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 068-071/270, throat depth: 150 mm, table width: 280 mm, table length: 280 mm, distance table to ram: 355 mm, stroke length: 280 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm Itsdpfx Agowvh R Ae Nen MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Condition: new, Year of construction: 2022, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm Itsdpfjhmi T Usx Ag Nen

Year of construction: 1991, condition: used, pressure 100 t throat 380 mm stroke 300 mm arm length 380 mm table surface area 1700x700 mm ram surface 1400x700 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 10 t dimensions of the machine ca. 2400x3600x3400 m Ijdjlp U Ayopfx Ag Notn

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm Isdpfxjt Hw Eze Ag Njtn stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: ready for operation (used), C-frame Press, Hydraulic Press, PYE Press 3t, Used Machine Itjdpfx Agsw Hc H He Nsn Manufacturer: VEB Wema Type: PYTE 3.15 Overall dimensions: 500 x 730 x 1170 mm Pressing force: 3.15 tons Stroke: 280 mm Table size: 280 x 280 mm Electrical data: 380 V; 1.5 kW; 4 A

Condition: good (used), Serial no.: 043-028/32, pressing force 1,600 kN, ram stroke 500 mm, throat depth 360 mm, max. distance table to ram 800 mm, weight 7,000 kg, recorded operating hours 33,408. Isdpfowyw T Ujx Ag Njtn

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Itjdpfx Aed Egc Asg Nen Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t stroke:250 mm return capacity:6,3 t Isdpfxjfxyhfo Ag Netn motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Year of construction: 1991, condition: used, pressure 40 t throat 320 mm stroke 250 mm arm length 320 mm Itjdpfxelp U Avs Ag Nsn table surface area 1400x600 mm ram surface 1200x600 mm dayligth 650 mm total power requirement 22 kW weight of the machine ca. 8 t dimensions of the machine ca. 3200x3300x3300 m

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration Isdet Hw Dwjpfx Ag Notn

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Itedpfxsvc Awxo Ag Nen Operation via two-hand control panel. (and one-hand operation) *

Condition: good (used), Year of construction: 2014, volume flow: 1,570 m³/h, Vacuum pump Becker Variair RV 2.1944/10 Relative pressure: +410 mbar Itjdpfx Ajv Anv Teg Njn Volume flow: 1570 m3/h Weight: 60 kg + 21 kg inverter

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP Itedpfx Ajumk Nasg Njn General: Display: 0-400kp/cm2 / 0-25Mp

Condition: new, Year of construction: 2019, pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:190 l main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm Itsdpfjfu Nqxox Ag Non pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm Iodpfx Agecxxrrs Netn hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m Ijdpod R Szujfx Ag Netn

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, total height: 2,350 mm, total width: 1,000 mm, total length: 1,300 mm, pressing force: 10 t, table width: 500 mm, table length: 400 mm, operating speed: 100 mm/s, overall weight: 1,300 kg, reverse speed: 450 mm/s, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, stroke length: 400 mm, Equipment: documentation/manual, Hydraulic press PYE 10 S/1M. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Operating pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Clearance: 630 mm. Ram stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 5.2 kW. Weight: 1300 kg. Itodpswb Dhnofx Ag Nen Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Machine in very good technical condition. Machine after complete overhaul.

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Iodpfx Agsu Hkfpo Netn Stroke Length: 180 mm

Condition: used, Year of construction: 1994, pressure:100 t Iedpfxet Hmk He Ag Notn throat:280 mm piston stroke:300 mm table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm voltage:380 V weight of the machine ca.:4 t

Year of construction: 1990, condition: used, pressure 100 t throat 260 mm stroke 300 mm table-size 500 x 500 mm ram head dimension 650 x 500 mm dayligth 700 mm oil volume 600 l capacity of ejector in table 40 t return capacity 13 t total power requirement 22 kW weight of the machine ca. 7 t dimensions of the machine ca. 2.07 x 2.48 x 3.3 m Iodpfeb U Hvasx Ag Notn - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available

Condition: used, Year of construction: 1979, pressure:63 t throat:315 mm Isdpocxxmkofx Ag Notn stroke:200 mm power capacity:15 kW piston stroke:200 mm :450 mm table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min return speed:210 mm/sec total height over floor:2500 mm length in width:1000 mm depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t