Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: KraussMaffei Type: KM 300-1400 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 254603 Machine weight: 12,500 kg Clamping force: 3,000 kN Control system: KraussMaffei machine control system with screen operation Operating hours according to display: 96,208 h Material supply: Material conveying/dosing components installed on the machine Hydraulics: Rexroth components visible Peripheral control: RMS Systems Touch Control available Conveying technology: Discharge/conveyor belt available Fpodsz Alpgspfx Aanjp Cooling unit 1: Frigel RCM80/6HP Year of manufacture, cooling unit 1: 2012 Voltage, cooling unit 1: 400 V Max. current, cooling unit 1: 17 A Refrigerant, cooling unit 1: R407C Refrigerant charge, cooling unit 1: 2.4 kg Weight, cooling unit 1: 200 kg Cooling unit 2: Frigel RCD80/12HP Year of manufacture, cooling unit 2: 2013 Voltage, cooling unit 2: 400 V Max. current, cooling unit 2: 29 A Refrigerant, cooling unit 2: R407C Refrigerant charge, cooling unit 2: 2.4 kg Weight, cooling unit 2: 240 kg Location: Freiburg Available from APRIL 2027

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Fpodsyhrqispfx Aanjp

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg with the following peripherals: Fpode Ahkh Aspfx Aanop - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Fodpfxjzk D Dxo Aanjpp Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2017, operating hours: 15,635 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 26 mm, displacement volume: 57 cm³, tie bars: 370 x 320 mm Mould height min: 150 mm Opening stroke: 270 mm Injection weight: 52 g Fpodpfx Aas Ad N Erjnjp Screw: 26 mm Injection pressure: 2200 bar Auswerferkraft: 19,6 kN

Condition: good (used), Year of construction: 2004, clamping force: 1,000 kN, clearance between the columns: 420 mm, displacement volume: 192 cm³, type of input current: DC, input frequency: 50 Hz, input current: 80 A, For sale: Battenfeld injection moulding machine, model HM 1000-750. The machine is in good condition and ready for immediate use. Technical data: Model / Type: HM 1000/750 Year of manufacture: 2004 Control system: Unilog B4 Total weight: 4,600 kg Hydraulic operating pressure: 240 bar Pneumatic operating pressure: 6 bar Rated voltage: 230/400 V Frequency: 50 Hz Rated motor current: 40 A Fpsdpfoy Enh Tjx Aanep Control voltage: 24 V DC Wiring diagram number: HM B4500028412 0 Max. main fuse: 80 A (1st power supply) / 50 A (2nd power supply) Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Maximum shot volume: approx. 192 cm³ Total input current: 63 A or 80 A Transport and loading can be organised Europe-wide upon request and at an additional cost. Prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange is possible! Machinery Trade / Purchase BUYING & SELLING PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: Fpedpeytgmvefx Aansp - Weight including frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: used, Year of construction: 2007, This KRAUSS MAFFEI injection molding machine, KM650-2700 C2, will be auctioned off online in our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - injection molding machines, temperature control units, storage racks and various other items. Fpjdpfx Ae Aiqpyjansp You can find this and many other items on our platform.

Condition: good (used), Year of construction: 2026, functionality: fully functional, Brand: Dr. Boy GmbH & Co. KG Type: BOY 20E PRO Year of manufacture: 2026 Operating hours: < 50 Screw diameter: 22 mm Injection pressure (max.): 1732 bar Shot volume (max.): 30.4 cm³ Clamping force: 20 t Max. distance between tie bars: 254 mm Min. mould height: 200 mm Distance between platens (max.): 400 mm Dimensions: 2290 x 784 x 1673 mm Weight: 875 kg Fpedpfx Aj Ahn U Seanjp Options: • TEC package 1: wear protection & high temperature - High wear-resistant plasticizing unit (22 mm) - Ceramic high-performance heating bands - Insulation sleeves - Temperature control of the feed zone • Air ejection (1x) • Mould lighting • 4 freely programmable inputs/outputs • Oil filling (ISO-32 "EconFluid")

Condition: used, Year of construction: 2000, This KRAUSS MAFFEI injection molding machine, KM 500-2700 C2, will be auctioned online as part of our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Fpodpfx As Aiqnqeanjp You can find this and many other items on our platform.

Condition: good (used), Year of construction: 2011, operating hours: 59,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 30 mm, clearance between the columns: 270 mm, injection pressure: 2,000 bar, total length: 3,180 mm, total width: 1,430 mm, total height: 1,850 mm, overall weight: 2,110 kg, warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit Fsdpoz Eax Eefx Aanepp clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen text german screen text german core pulling hydraulically 1x Anti vibration mounts

Condition: used, Year of construction: 2001, This KRAUSS MAFFEI injection molding machine, model KM 420-2700 C2, will be auctioned online as part of our industrial auction / machinery auction hosted by Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Fede Aiqn Ajpfx Aanopp You can find this and many other items on our platform.

Condition: used, Year of construction: 2001, This KRAUSS MAFFEI injection molding machine, model KM 125-390 C2, will be auctioned off online in our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. You can find this and many other items on our platform. Fpsdpo Aiqlvsfx Aanep

Condition: used, Year of construction: 2007, Available immediately: a reliable and well-maintained Negri Bossi V70-150 injection moulding machine. This machine was manufactured in 2007 and has accumulated 32,870 operating hours. Known for its robust construction and dependable performance, the V70-150 is an excellent choice for processors seeking an efficient machine for a wide range of plastic injection moulding applications. The machine is available for inspection and can be demonstrated under power upon request. Feds Aiwh Espfx Aanepp Manufacturer: Negri Bossi Model: V70-150 Euromap Class: 700H-150 Year of Manufacture: 2007 Machine Weight: 2,450 kg Operating Hours: 32,870 h Availability: Immediate Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Negri Bossi Model: V70-150 Year of Manufacture: 2007 Euromap Class: 700H-150 Machine Weight: 2,450 kg Operating Hours: 32,870 h Availability: Immediate

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038743, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system Fpsdpe Ai E Awefx Aansp • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038744, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality Fpsdpfx Aao Ai E A Nonep CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Year of construction: 2018, machine/vehicle number: PR33, Used AOKI AL-500LL-50S injection molding machine - Year 2018Technical Specifications & Performance DataThe AOKI AL-500LL-50S is an injection molding machine designed for PET container manufacturing through an integrated injection and blow molding process. This used bottling line asset is configured with 7 cavities, supporting efficient production of molded containers for industrial packaging and beverage production applications.Manufacturer: AOKI Technical Laboratory, Inc.Model: AL-500LL-50SManufacturing year: 2018Including: compressor and chillerCavity configuration: 7 cavitiesScrew diameter: 64 mmInjection capacity: 522.8 cm³/shotInjection mold clamping force: 500.3 kNPreform length below neck: 150 mmBlow mold clamping force: 608.3 kNBlow air pressure: 3.0 MPaAdvanced Automation & Control SystemsThe machine is equipped for three-phase electrical operation at 380 V and 50 Hz. Its installed electrical load is 94.0 kW with a current requirement of 168 A. The injection molding platform combines turntable and screw drive functions with hydraulic and pneumatic utilities for controlled molding cycles.Three-phase electrical supplyVoltage: 380 VFrequency: 50 HzPower: 94.0 kWCurrent: 168 AHydraulic pressure: 17.5 MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaProduction Line Integration CapabilitiesThis AOKI injection molding machine can be positioned upstream of a used bottling line to produce PET containers directly from resin, reducing dependence on externally supplied bottles. Machines of this type are suited to integrated industrial packaging layouts where container production is coordinated with downstream handling, filling, capping, labeling and secondary packaging equipment.The 7-cavity configuration supports repeatable container molding for beverage production. Integration planning should consider molded-container discharge, conveyor connection, compressed-air supply, chilled-water services and downstream accumulation capacity.Machine Condition & Maintenance HistoryThe machine is offered as a second hand industrial packaging asset and is ready for operation. No mold is included with the machine, and auxiliary parts are not included. Buyers should plan tooling selection and auxiliary equipment integration according to the required container design and production process.Operational Performance & VersatilityThe AL-500LL-50S combines injection molding and blow molding functions for PET container production. Its technical configuration includes a 600 mm injection mold clamping stroke, a 115 mm blow mold clamping stroke, and a maximum chilling capacity of 51.2 kW. The machine requires cooling-water management and compressed air to support stable molding operation.Injection capacity varies according to the resin and molding parameters used. Actual operating pressure is governed by... Fedj Aia Ezopfx Aanspp

Condition: excellent (used), Year of construction: 2015, operating hours: 54,244 h, machine/vehicle number: 231099, clamping force: 2,200 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, injection weight: 359 g, mold height (min.): 350 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer a used Arburg Allrounder 570 S 2200-800, manufactured in 03/2015, with Multilift Select and protective enclosure. The redacted purchase evaluation documents the seller's information regarding technology, condition, maintenance, and equipment. Fpodpfx Aae Ahzy Hjnjp TECHNICAL DATA Clamping force: 2,200 kN / 220 t Control system: Selogica Injection unit: 800 Screw: 50 mm Shot weight: 359 g PS according to seller's form Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum mold height: 350 mm Opening: 1,000 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Pump operating hours: 54,244 h Automatic operating hours: 48,230 h Operating hours according to control system photo dated 04.11.2026 Machine number: 231099 Total connection according to nameplate: 105 kW; 400 V, 3 ~, 50 Hz HANDLING AND EQUIPMENT Multilift Select transverse, 15 kg load capacity, No. 605572 X/Y/Z: 900/1,000/1,600 mm X-axis synchronized with ejector for precise part removal B- and C-axis pneumatic 4 x vacuum, 4 x gripper double-acting Customer-side inputs and outputs Protective enclosure 12 hot runner zones 2 core pulls, 2 blow functions Interfaces for temperature control unit and dryer Controlled pump, IE2 according to seller CONDITION AND AVAILABILITY Regularly maintained; last maintenance according to seller, internally in September 2026. No known defects or outstanding repairs are stated in the seller's form. The purchase evaluation is a documented seller's statement. Available according to the seller's form from the beginning of 2027. Price on request. I would be happy to discuss inspection, delivery, and payment terms with you personally.

Year of construction: 1998, condition: used, Clamping force: 8000kN, hydraulic pressure: 192bar, hydraulic oil capacity: 1520l, control system: Battenfeld UNILOG 9000, electrical connection: 230/400V, 50Hz, net weight: 42/14.5t, total weight: 56.5t, operating hours: 34,234h, including two temperature control units and a Battenfeld robot, year of manufacture: 1997. An on-site inspection is possible. Fpsdpfx Ao Ai Hctjanop

Condition: good (used), Year of construction: 1999, clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection molding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Machine weight: 12,500 kg CE marking: present 2 units available WITHOUT LINEAR ROBOT! Fjdpfx Aoytnnzsanepp Further information available upon request.

Condition: used, Year of construction: 1999, functionality: fully functional, Injection molding machine KraussMaffei KM 800-5700 MC – Year of manufacture: 1999 Technical data: Manufacturer: KraussMaffei Model: KM 800-5700 MC Year of manufacture: 1999 Clamping force: 8,000 kN (800 t) Screw diameter: 105 mm Operating hours: approx. 82,540 h 4 core pulls 1 air valve AS Tool mounting height: min. 600 mm, max. 1,100 mm Closing stroke: 1,400 mm Platen size: 1,300 × 1,300 mm Tie bar spacing horizontal: 1,120 mm Tie bar spacing vertical: 1,000 mm Centering ring: 250 mm 8 water circuits each Equipment: Conveyor belt Enclosure Handling system Condition: The machine is functional and can be tested. In 2025, the machine was inspected by KraussMaffei, and the pump connections were resealed. Fedpfx Aaj Aif E Ijnopp Location: Thuringia, Germany _____ Subject to prior sale and errors in technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: good (used), Year of construction: 2003, For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website Fpjdpjlwxpiofx Aansp

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons Fpjdjzzv Tgspfx Aansp • Dry Cycle: 2.3s / 500mm Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: used, Year of construction: 2007, operating hours: 47,205 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, overall weight: 22,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 420 V, input current: 482 A, Krauss Maffei KM 320-2700 C3 injection molding machine for sale Due to the renewal and expansion of our production capacity, we are offering our Krauss Maffei KM 320-2700 C3 injection molding machine for sale. The machine is currently fully connected and operational in our production facility. This allows potential buyers to view and test the machine in working condition, subject to serious interest. Technical specifications Manufacturer: Krauss Maffei Type: KM 320-2700 C3 Year of manufacture: 2007 Clamping force: 320 tons Injection unit: 2700 Screw diameter: 80 mm Serial number: 61009058 Machine weight: approx. 22,000 kg Total operating hours: 47,205 hours Production hours: 39,180 hours Control system: Krauss Maffei MC4 Condition of the machine The machine is complete and is currently installed in our production environment in the Netherlands. The machine is operational and connected, which allows for inspection while powered on and a demonstration of its operation. The machine is being sold due to a change/renewal of our production capacity, not because the machine is out of service. Inspection and availability The machine is located in the Netherlands/Bodegraven and is currently connected and being used for production. Inspection is possible by appointment. If there is serious interest, the machine can be demonstrated in working condition. Additional photos, technical data, and a video of the machine in operation are available upon request. Location: Netherlands/Bodegraven Condition: used, operational Fodpfe Ahy D Sex Aanjpp Availability: by arrangement

Condition: used, Year of construction: 2007, operating hours: 98,000 h, clamping force: 80 kN, displacement volume: 61 cm³, injection pressure: 2,740 bar, overall weight: 3,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request Fedpe Aiv D Tjfx Aanepp terms of payment: 100% prior to delivery