Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Bdedsyw Svfspfx Aaaja

Condition: used, Year of construction: 2011, USED PLASTIC INJECTION MOULDING MACHINE Manufacturer: ENGEL, Model: Insert 200H/70 Configuration: Rotary table Clamping force: 70 t Year of manufacture: 2011 - well maintained, serviced, no oil leakage. Commissioning date: 09.06.2011 Operating hours: 57,077 h Injection unit: 30 mm Control system: CC200 Weight: 6,200 kg Special features: Bdsdsyx St Topfx Aaaea - Light curtain - Freely programmable inputs and outputs - 9 freely programmable inputs can be programmed station-dependent - 9 freely programmable outputs - Handling interface: Euromap 67 - Charge amplifier for pressure-dependent holding pressure switchover, including corresponding graphical pages - 3 potential-free monitoring inputs for monitoring of peripheral equipment such as temperature control units - Euromap 63 interface for integration into machine data acquisition systems - Hot runner control / shut-off nozzle control

Condition: used, Year of construction: 1999, operating hours: 82,540 h, Injection Molding Machine Krauss Maffei Model: KM 800-5700 MC Year: 1999 Screw diameter: 105 mm 4 core pullers 1 air valve AS Approx. 82,540 operating hours Mold installation height: min. 600 mm, max. 1,100 mm Clamping stroke: 1,400 mm Platen dimensions: 1,300 mm x 1,300 mm Tie bar distance (horizontal): 1,120 mm, (vertical): 1,000 mm Centering ring: 250 mm Bdedpfx Aoyup D Hsaasa 8 water circuits each Conveyor belt Enclosure Handling system Tested and pump connections sealed by KM in 2025 The machine is operational and still in production Location: Thuringia _____ Our general terms and conditions apply; the seller assumes no liability for typing or data transmission errors. The specifications and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2017, operating hours: 32,536 h, functionality: fully functional, machine/vehicle number: B1377, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,860 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 250 kg, pressure: 1,860 bar, power: 3 kW (4.08 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, cylinder diameter: 12 mm, load hours: 32,536 h, opening width: 110 mm, Equipment: documentation/manual, For sale is a very well-maintained Babyplast 6/10P injection molding machine from 2017. This machine has only been operated by a professional molder, has been regularly serviced, and is in excellent condition. With only 32,536 operating hours, it is among the less-used machines in its performance class and is ready for immediate operation. Thanks to its extensive additional equipment, this unit offers optimal conditions for efficient, precise, and stable production processes. Save on dealer commissions by purchasing directly from the machine owner. Multiple machines available for immediate delivery. All machines are identically equipped, operating hours may vary but are in a similar range. If interested, please contact us – we can also offer you an attractive bundle price. Equipment & Highlights ✔ Selective chute – clean separation and optimized parts handling ✔ Ceramic heating beads – allow higher processing temperatures and energy-efficient heating ✔ Electric mold heating unit – ensures precise mold temperature control ✔ Robust machine frame – ideal for operation and maintenance ✔ Air-blast unit – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Technical Data – Babyplast 6/10PT Plasticizing unit - Plunger diameter: 12 mm - Stroke volume: 6 cm³ - Specific injection pressure: 1830 bar Bdjdeyuuh Djpfx Aaaja Clamping unit - Clamping force: 62.5 kN - Opening force: 4 kN - Opening stroke: 30–110 mm - Ejector force: 5 kN - Ejector stroke: 45 mm Dimensions: - Weight incl. frame: approx. 250 kg Shipping dimensions: L: 116 cm W: 70 cm H: 195 cm This is a private sale. Warranty and liability for material defects are excluded.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment Bdodpfxeyg I Iho Aaaea • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Year of construction: 2000, condition: ready for operation (used), This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Euromap Interface: 12 / Hydraulic Units: 1 Bjdpfx Aaeyaryueaoda Machine Benefits Technical Machine Benefits • Max. Pressure: 1878 bar / max. Injection volume: 275 cm³ • Hot nozzle zones: 1 / screw diameter: 45 mm

Year of construction: 2016, operating hours: 48,336 h, condition: ready for operation (used), This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine. • Machine power (tons): 300 • Between columns w x h (mm): 750 x 1000 • Min. mold height (mm): 400 • Max. mold height (mm): 900 • Max. distance between plates: 1300 • Diameter of center ring / height: 160/15 • Diameter of thread on ejector coupling: M24 • Diameter of screw (mm): 60 • Hot runners: 16 • Hydraulic core pullers: 4 • Robot: Viper 12 Bedpox U Dp Eofx Aaajda

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) Bedpfxox D E Dyj Aaasda • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment Bodpfxsx Nr Huj Aaasda • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped) Bdedpfx Aex Nr Uxjaaoa

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, clamping force: 3,200 kN, screw diameter: 60 mm, injection weight: 723 g, total height: 2,400 mm, overall weight: 17,700 kg, This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Additional equipment • The Wittmann robot is not included • Conveyor belt is included, protective housing only for the electrical components • No other peripherals are included. Machine Benefits Qualitative Machine Benefits • Condition: used, pump overhauled Bsdex D N Sbjpfx Aaajda Technical Machine Benefits • Known defects: water computer and water batteries should be overhauled (no influence on function) • Machine without handling system and peripherals Extra Information Machine still under power Dimensions Machine Depth 7200 mm

Condition: ready for operation (used), Year of construction: 2009, clamping force: 3,300 kN, screw diameter: 180 mm, This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information. • Units available: 2 • Control system: OIMA ECO NT3 • Injection system: Hydraulic Bdedpfx Aaex D I R Aoaoa • Drive: Electric-hydraulic hybrid • Cooling system: Integrated • Diagnostic interface: GDNet communication (real-time monitoring and fault diagnostics) • Applications: Medium-to-large plastic components production

Year of construction: 2015, operating hours: 49,071 h, condition: ready for operation (used), overall weight: 4,400 kg, Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details. Bdedsyninfjpfx Aaaja • Clamping Force: 100t • Screw Diameter: 26mm • Power Supply: 200 V∼50/60 Hz, 220 V∼60 Hz

Condition: ready for operation (used), Year of construction: 2014, operating hours: 54,454 h, screw diameter: 25 mm, This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. • Screw: 25mm • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 80 A • Heating rated current: 58 A • Total rated current: 138 A • Total connected load: 75 kW Bjdpfxox D Rcuo Aaasda • Calibration year: 2027 • Optional: Geiger Handling

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Bjdpfxeyaizvj Aaaeda Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) Bjdpfxjx D Hgvo Aaaoda • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Year of construction: 2001, condition: ready for operation (used), This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information. Bdsdsyary Ujpfx Aaaea Machine Benefits Technical Machine Benefits • Screw diameter: 50 mm/ max. Pressure: 1521 bar / max. Injection volume: 340 cm³ • Euromap interface: 12 / hydraulic units: 1 / air units: 1 / hot nozzle zones: 1

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar Bjdpfx Aaeyf Htyeasda • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm Bedpjyg Nfuefx Aaasda • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm Bjdpfx Aoylkxajaaeda • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Year of construction: 2011, condition: ready for operation (used), This HAITIAN MA-4700 injection moulding machine was manufactured in 2011. It offers an injection capacity of 1860 grams and a powerful injection pressure of 1850 Bar. The clamping force can reach up to 470 tons, accommodating molds with a thickness range of 320 mm to 820 mm. The distance between tie bars is 1560 mm, ensuring ample space for various mold sizes. Consider the opportunity to buy this HAITIAN MA-4700 injection moulding machine. Contact us for more information. Additional equipment Bjdpfx Aaoyll Ehjaeda • New positioners • New oil cooler • ALFA ROBOT Machine Benefits Qualitative Machine Benefits • Without conveyor Technical Machine Benefits • Injection capacity: 1860 g • Max. Injection pressure: 1850 bar • Diameter of screw mass: 75 mm • Max. Mold clamping force: 470 tons • Min. Mold thickness: 320 mm • Max. Mold thickness: 820 mm • Max. Distance between tie bars: 1560 mm • Diameter of central ring: 200 mm • Distance between guide rails: 840x830 mm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 80,649 h, clamping force: 2,500 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details. • Injection volume: 441 cm³ • Specific injection pressure: 2268 bar • Tie bar spacing: 630 × 630 mm • Platen size (W × H): 970 × 1035 mm • Pressure cylinder length: 320 mm Bdodpfx Asymzawjaasa • Minimum installation height: 345 mm • Maximum installation height: 1195 mm • Maximum ejector stroke: 200 mm • Centering ring: 160 mm • Core pulls: 2 • Hydraulic/Pneumatic interface: H8

Year of construction: 2002, condition: ready for operation (used), screw diameter: 120 mm, This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information. • Distance between tie bars: 720 × 720 mm • Maximum mold stroke: 700 mm • Mold shut height: 450–900 mm • Maximum hydraulic ejector stroke: 225 mm • Screw stroke: 400 mm Bdodex D Rcnjpfx Aaasa • Screw L/D ratio: 25:1 • Maximum screw speed: 60 rpm • Shooting pot stroke: 340 mm • Shooting pot diameter: 110 mm • Melt channel diameter: 32 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 42,581 h, screw diameter: 20 mm, controller manufacturer: FANUC, This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information. Bjdpox D R Ahsfx Aaasda • Optional: Wittmann Handling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits Bdjdex D Hntspfx Aaaja • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/