Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Njdpfx Ahsxzd Ixe Uodf Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,004 h, clamping force: 2,000 kN, screw diameter: 40 mm, total height: 2,280 mm, overall weight: 9,400 kg, product length (max.): 6,610 mm, General Data Machine weight 9400 kg Measurements height 2280 mm Clamping Unit Ndedpex H Uzcsfx Ah Ujf Clamping force 2000 kN Injection Unit Screw diameter 40 mm Dimensions Machine Length 6610 mm This DEMAG El-Exis SP 200/560-675 was manufactured in 2018. It features a screw diameter of 40 mm, a maximum dosing volume of 255 ccm, and a clamp force of 2000 KN. The tie bar distance is 560 mm, and it has a total weight of 9,400 kg. Consider the opportunity to buy this DEMAG El-Exis SP 200/560-675 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Nsdpfxsx I Rqco Ah Uodf

Condition: used, Year of construction: 2004, This Sumitomo DEMAG injection moulding machine "Ergotech concept 200/560-840" is being offered in our online industrial auction / machinery auction for warehouse clearance of injection moulding machines. Nedsx Hvt Hepfx Ah Usdf You can find this and many other listings on our platform.

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, DUROPLAST granulate injection unit, core pull, blow-out device, 4-cavity mould heating Nodex Ngmcepfx Ah Ujdf

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm Njdpfx Ahexwva Eo Ujdf - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Nodpfsx Hg R Asx Ah Usdf Plug combination for electrical connection

Condition: ready for operation (used), Year of construction: 2018, operating hours: 28,076 h, General Data Machine weight 27000 kg Measurements height 2780 mm Clamping Unit Clamping force 4200 kN Ndjdjx H U Enopfx Ah Uof Injection Unit Screw diameter 60 mm Dimensions Machine Length 8900 mm This DEMAG El-Exis SP 420/820-2500 was manufactured in 2018. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a maximum dosing volume of 891 ccm, and a clamp force of 4200 KN. The tie bar distance is 820 mm. If you are looking to get high-quality moulding capabilities consider the DEMAG El-Exis SP 420/820-2500 machine we have for tact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2001, operating hours: 110,913 h, functionality: fully functional, clamping force: 500 kN, overall weight: 2,250 kg, heating capacity: 6.3 kW (8.57 HP), pump power: 15,000 W, power: 21.3 kW (28.96 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, We are offering this used Arburg 320S 500-150, year of manufacture 2001. Machine No.: 187301 Year of manufacture: 11/2001 Weight: 2250 kg Clamping force: 500 kN Njdex Nkgtepfx Ah Usdf Operating voltage: 400 V Network phases: 3~ Frequency: 50 Hz Heating: 6.3 kW Pump motor: 15.00 kW Total connected load: 21.3 kW If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, This Sumitomo DEMAG injection moulding machine "System 200/560-320" is being offered for online auction as part of our industrial auction / warehouse clearance for injection moulding machines. Nodpfsx Hvttox Ah Usdf

Condition: like new (used), Year of construction: 2021, functionality: fully functional, manual gasfiller Nodpsx Dtk Ijfx Ah Ujdf

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Direct from mold construction: ARBURG 420 C 1000-250 VARIO - Injection unit horizontally movable Year 2001, 43,600 operating hours, single owner, top condition, equipped as follows for sale: 35 mm screw, Technical level 2 servo-controlled clamping unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, CF card reader. Well-maintained machine, can be inspected while in operation. Without peripherals. Dryer, conveyor, color mixer, hopper by MOTAN available at extra cost, if required. * Further machine: ARBURG 320 C 600-100 - Injection in parting line possible, Year 2005, only 36,500 operating hours, single owner, top condition, for sale with the following equipment: 25 mm screw, 2nd screw 30 mm, system for injection in the parting line, technical level 2 servo-controlled clamping unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, very well-maintained machine, can be inspected while in operation. EUR 8,500, without peripherals— Ndjdjxwa A Dspfx Ah Uof Dryer, conveyor, hopper by DIGICOLOR and sprue picker by GEIGER MiniServo available at extra cost, if required.

Condition: used, Year of construction: 2010, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, load hours: 47,000 h, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ndsdpfxex E A Two Ah Uef

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Machine weight 27000 kg Measurements height 278 mm Dimensions Machine Length 890 mm Ndodpjx H U Ehsfx Ah Uof Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2024, Outstanding Kraus Maffei injection moulding machine from 2024. In perfect condition with only 588 operating hours. Njdpfx Ahsx Ald Rj Usdf Equipped with: 1x pneumatic valve on MOP 1x Hydraulic Power Pack 20l 2x Hydraulic core pull 1x 4-fold water battery Can be inspected under power upon appointment. Immediately available for delivery. More info available on request. Injection unit: 1400 Screw: 60 mm / 23.00 wear protection / 25.50 Min/Max tool installation height: 250/600 mm Max opening Width: 1150 mm Ejector: Platten Ejector EM hydraulix/electric Core Pull: 2 hyd Air valves: 1 MMP Control system: MC P1 Power supply: 400 / 230 V 50Hz 3 phase with neutral Clamping force: 2500 kN Injection capacity: 679 cm³

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 58211, clamping force: 4,500 kN, The machine is powered and can be demonstrated in working condition. Nsdsx Af Ayepfx Ah Usdf

Year of construction: 1993, condition: ready for operation (used), Some old injection molding machines from Arburg, Demag and Stübbe are available. 1) Arburg 470C 1300-575, year of manufacture: 1993, clamping force: 1300kN, shot weight: 270g, mold installation height min./max.: 300mm/950mm, opening stroke: 650mm, tie bar spacing: 470mm/470mm, screw diameter: 50mm, core pulls: 3. 2) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 3) Demag D 150/452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 4) Demag D100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 5) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, min. mold installation height: 225mm, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 6) Demag D250-730 NC III, year of manufacture: 1991, clamping force: 2500kN, shot weight: 320g, mold installation height min./max.: 310mm/710mm, opening stroke: 600mm, tie bar spacing: 560mm/560mm, screw diameter: 52mm, core pulls: 1. 7) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On site inspection is possible. Individual sale possible. Nsdex Hz Sbepfx Ah Uodf

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Ndsdpfx Aex Dbtweh Uef Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: used, Year of construction: 2017, clamping force: 550 kN, displacement volume: 1,239 cm³, injection pressure: 1,990 bar, overall weight: 21,000 kg, load hours: 21,636 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) Ndsdjx E A Tqepfx Ah Uof delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2008, operating hours: 98,000 h, Clamping Unit Clamping force 240 ton This Netstal SynErgy 2400-900 was manufactured in 2008. An hydraulic injection moulding machine with 98,000 hours of service and a clamping force of 240 tons. Consider the opportunity to buy this Netstal SynErgy 2400-900 injection moulding machine. Contact us for more information. Ndjdpfex D Nrbjx Ah Uef Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Arburg Allrounder Selecta 630S - 2500 – 1300 ECO Year of manufacture: 2006 Control system: Selogica with symbol display VE-605/04 TFT flat screen color display VE-605/02 Screw diameter: 60mm Injection volume: 664ccm / 607g Clamping force: 2500kN Tie bar spacing: 630mm x 630mm Minimum mould installation height: 300mm Distance between platens: 900mm–1300mm Mould opening stroke: 600mm Ejector stroke: 225mm Core pull control: 2 circuits Plug ejector plate safeguarding Equipment: - 2-circuit core pull, serial, parallel to tool movement - Ejector with quick-release coupling - Ejector plate safeguarding - Clamping force control - Control extension for special signals, accessible at circuit board (e.g. for pneumatic valve 5/2 valve) - Inputs and outputs freely programmable (4 in / 4 out) - Interface for handling, Euromap 67 (50-pin) - Interface for mould protection (ejector plate safeguarding) - Interface for temperature control unit, connection for up to 6 devices - Interface for coloring / dosing unit - Interface for GIT system - Hot runner control, 6 zones, max. 2 KW/230V per zone - Mould protection - Equipment package No. 1: Advanced monitoring of tool and machine sequence - Equipment package No. 2: Extended movement, increased number of movement steps - Equipment package No. 3: Production control with setpoint temperature detection, automatic on/off - Equipment package No. 5: Optimization of operator assistance - Equipment package No. 6: Quality assurance with process analysis, error evaluation, automatic reference - Equipment package No. 7: Documentation with actual value log via printer interface - Plug combination for electrical connections - Printer interface, serial V24 Technology level 2 – servo-controlled Njdox Dzkpjpfx Ah Uodf Hydraulic system with 2 variable displacement pumps. The second pump is servo-controlled Without robot and peripheral devices.

Condition: excellent (used), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions: WxHxD mm (8700 x 2800 x 2500) Screw diameter 2400: 70 mm 720: 45 mm Injection volume 2400: 1239 cm³ 720: 334 cm³ Injection capacity 2400: 1127 g  720:  304 g Injection rate 2400: 300 g/s 720: 142 g/s Injection pressure 2400: 198 MPa 720: 222 MPa Screw speed 2400: 0-184 r/min 720: 0-180 r/min Diameter of turntable : 1250 mm Max load on turntable: 3.3 t Power connection: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and double cylinder control 3 modes for injection retraction Closing unit: Closing force 5300 kN Nedpfovvlv Rsx Ah Usdf Connection for Euro 18 robot Safety door Condition: used Scope of delivery: (See picture) Sale from location! Weight: approx. 31000 kg (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 70 mm, displacement volume: 1,155 cm³, injection pressure: 1,482 bar, ejector stroke: 250 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 4,000 kN Mounting platen (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Opening stroke: 950 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1,482 bar Shot volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Rated power pump motor: 45 kW EQUIPMENT Nodpex Dbp Sefx Ah Usdf Oscillating elements 2 x 24-way water manifold Material hopper Degassing screw Robot interface 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Nedpjx D N E Iofx Ah Uodf Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 7000 kg Dimensions Machine Length 5000 mm Injection Unit Screw diameter 40 mm Ndsdpex Nkpusfx Ah Usf Clamping Unit Clamping force 1195 kN This Engel Victory 500/120 Tech was manufactured in 2010. It features a clamping force of 120t and a screw diameter of 40 mm. The machine has a minimum mold size of 300 mm, an opening of 500 mm, and a daylight of 800 mm. Dimensions are 5m x 1.7m, weighing 7 tons. Consider the opportunity to buy this Engel Victory 500/120 Tech hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding