Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Phodpsxzfg Nefx Ah Uea Clamping force: 1,100 kN Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V EQUIPMENT Documentation / manual Display language: German CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Condition: good (used), Year of construction: 1998, operating hours: 65,000 h, clamping force: 3,300 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,039 cm³, injection pressure: 1,400 bar, injection weight: 940 g, DEMAG ERGOTECH 330 T injection molding machine in good condition Reference: Ergotech E330-1450-NC4S Year: 1998 65,000 operating hours Podpfxowcq A Ue Ah Ujha Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1039 cm3 Injectable weight in PS: 940 g Injection pressure: 1400 bar Maximum dosing stroke: 270 mm Heating power: 27 kW Plate dimensions: 1040 x 950 mm Distance between columns: 710 x 630 mm Mold thickness: 330 - 710 mm Maximum opening stroke: 675 mm + SEPRO robot type 3031 YN MPA II X axis: 2500 mm Y axis: 800 mm Z axis: 1400 mm Machine dimensions: 6.50 x 2.00 x 2.30 m Machine weight: 14,300 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,004 h, clamping force: 2,000 kN, screw diameter: 40 mm, total height: 2,280 mm, overall weight: 9,400 kg, product length (max.): 6,610 mm, General Data Machine weight 9400 kg Measurements height 2280 mm Clamping Unit Clamping force 2000 kN Phjdpfx Aex H Uzcoh Uoa Injection Unit Screw diameter 40 mm Dimensions Machine Length 6610 mm This DEMAG El-Exis SP 200/560-675 was manufactured in 2018. It features a screw diameter of 40 mm, a maximum dosing volume of 255 ccm, and a clamp force of 2000 KN. The tie bar distance is 560 mm, and it has a total weight of 9,400 kg. Consider the opportunity to buy this DEMAG El-Exis SP 200/560-675 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2004, This Sumitomo DEMAG injection moulding machine "Ergotech concept 200/560-840" is being offered in our online industrial auction / machinery auction for warehouse clearance of injection moulding machines. You can find this and many other listings on our platform. Pedpfxex Hvt Hs Ah Ueha

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ Phedpsxwva Eefx Ah Usa - E-Screwdrive An inspection can be arranged at any time by appointment.

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Phsdpfex I Rqcex Ah Usa

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Clamping force: 2,500 kN Phjdpsxzd R Tsfx Ah Uea Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Water manifold Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit.

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, DUROPLAST granulate injection unit, core pull, blow-out device, 4-cavity mould heating Pjdpjx Ngmcofx Ah Usha

Condition: ready for operation (used), Year of construction: 2018, operating hours: 28,076 h, General Data Machine weight 27000 kg Measurements height 2780 mm Clamping Unit Clamping force 4200 kN Injection Unit Screw diameter 60 mm Dimensions Machine Length 8900 mm This DEMAG El-Exis SP 420/820-2500 was manufactured in 2018. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a maximum dosing volume of 891 ccm, and a clamp force of 4200 KN. The tie bar distance is 820 mm. If you are looking to get high-quality moulding capabilities consider the DEMAG El-Exis SP 420/820-2500 machine we have for tact us for more information. Application Types Podpfsx H U Enjx Ah Ueha Injection Moulding

Condition: used, Year of construction: 2005, This Sumitomo DEMAG injection moulding machine "System 200/560-320" is being offered for online auction as part of our industrial auction / warehouse clearance for injection moulding machines. Phsdpfxex Hvtts Ah Usa

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Podpfxox Hg R Aj Ah Ueha Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: like new (used), Year of construction: 2021, functionality: fully functional, manual gasfiller Podex Dtk Ijpfx Ah Uoha

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Podpfx Aoxzd Nvjh Ueha Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Condition: used, Year of construction: 2001, operating hours: 110,913 h, functionality: fully functional, clamping force: 500 kN, overall weight: 2,250 kg, heating capacity: 6.3 kW (8.57 HP), pump power: 15,000 W, power: 21.3 kW (28.96 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, We are offering this used Arburg 320S 500-150, year of manufacture 2001. Machine No.: 187301 Year of manufacture: 11/2001 Phedpox Nkgtefx Ah Usa Weight: 2250 kg Clamping force: 500 kN Operating voltage: 400 V Network phases: 3~ Frequency: 50 Hz Heating: 6.3 kW Pump motor: 15.00 kW Total connected load: 21.3 kW If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Machine weight 27000 kg Measurements height 278 mm Dimensions Machine Length 890 mm Phodpfx Ahex H U Ehj Uja Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Direct from mold construction: Podsxwa A Depfx Ah Usha ARBURG 420 C 1000-250 VARIO - Injection unit horizontally movable Year 2001, 43,600 operating hours, single owner, top condition, equipped as follows for sale: 35 mm screw, Technical level 2 servo-controlled clamping unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, CF card reader. Well-maintained machine, can be inspected while in operation. Without peripherals. Dryer, conveyor, color mixer, hopper by MOTAN available at extra cost, if required. * Further machine: ARBURG 320 C 600-100 - Injection in parting line possible, Year 2005, only 36,500 operating hours, single owner, top condition, for sale with the following equipment: 25 mm screw, 2nd screw 30 mm, system for injection in the parting line, technical level 2 servo-controlled clamping unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, very well-maintained machine, can be inspected while in operation. EUR 8,500, without peripherals— Dryer, conveyor, hopper by DIGICOLOR and sprue picker by GEIGER MiniServo available at extra cost, if required.

Condition: used, Year of construction: 2010, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, load hours: 47,000 h, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request Phjdpfx Ahex E A Twj Uja terms of payment: 100% prior to delivery

Year of construction: 2019, condition: excellent (used), ecomac Gebrauchtmaschinen GmbH sells one used injection-moulding machine made by Husky. This machine is in a very good condition and will be sold with lots of accessories. If you are interested, please contact us directly. Phodpfoiq Nidox Ah Uja

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Pjdpfx Ahsxzd Ixs Usha Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: used, Year of construction: 2024, Outstanding Kraus Maffei injection moulding machine from 2024. In perfect condition with only 588 operating hours. Equipped with: 1x pneumatic valve on MOP 1x Hydraulic Power Pack 20l 2x Hydraulic core pull 1x 4-fold water battery Can be inspected under power upon appointment. Immediately available for delivery. More info available on request. Injection unit: 1400 Screw: 60 mm / 23.00 wear protection / 25.50 Min/Max tool installation height: 250/600 mm Max opening Width: 1150 mm Phjdpfx Ahox Ald Rs Uea Ejector: Platten Ejector EM hydraulix/electric Core Pull: 2 hyd Air valves: 1 MMP Control system: MC P1 Power supply: 400 / 230 V 50Hz 3 phase with neutral Clamping force: 2500 kN Injection capacity: 679 cm³

Condition: ready for operation (used), Year of construction: 2008, operating hours: 98,000 h, Clamping Unit Clamping force 240 ton This Netstal SynErgy 2400-900 was manufactured in 2008. An hydraulic injection moulding machine with 98,000 hours of service and a clamping force of 240 tons. Consider the opportunity to buy this Netstal SynErgy 2400-900 injection moulding machine. Contact us for more information. Phjdex D Nrbepfx Ah Usa Application Types Injection Moulding

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 58211, clamping force: 4,500 kN, The machine is powered and can be demonstrated in working condition. Phedpfsx Af Ayox Ah Uja

Condition: used, Year of construction: 2017, clamping force: 550 kN, displacement volume: 1,239 cm³, injection pressure: 1,990 bar, overall weight: 21,000 kg, load hours: 21,636 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Podpfx Ahjx E A Tqe Ueha

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment Phedpfex D N E Iex Ah Uja SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 7000 kg Dimensions Phjdpjx Nkpuefx Ah Uoa Machine Length 5000 mm Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1195 kN This Engel Victory 500/120 Tech was manufactured in 2010. It features a clamping force of 120t and a screw diameter of 40 mm. The machine has a minimum mold size of 300 mm, an opening of 500 mm, and a daylight of 800 mm. Dimensions are 5m x 1.7m, weighing 7 tons. Consider the opportunity to buy this Engel Victory 500/120 Tech hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding