Condition: excellent (used), Year of construction: 2015, Wittmann Batenfeld SmartPower 110/525 Cgoliswgxt Neqzggot Unilog B6 Control

Condition: reconditioned (used), clamping force: 500 kN, screw diameter: 38 mm, injection pressure: 1,341 bar, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Cgolowfp Hkeiqzggjt Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, Functionality: fully functional, machine/vehicle number: 221240, clamping force: 700 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, displacement volume: 188 cm³, injection pressure: 1,530 bar, injection weight: 172 g, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Cgeliqowg Tt Rjzggot Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: repair required (used), Year of construction: 2021, machine/vehicle number: HA0339, Equipment: - 1 chiller - 1 P100XS temperature control unit Cgoliqzgowhazqsgjt - 1 injection mold test rod

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand NETSTAL Injection Unit Injection pressure 279 kN Clamping Unit Clamping force 1500 kN Opening stroke 0-450 mm Csliewhgqfjqzggegt Mould height min 400 mm Mould height max 700 mm Additional Equipment Equipment: PLastification D 45-22D LP A / Mould heaters: 4 x 3.3 KW/ 32 x 0.75 KW / Robot interface 12+ / Paint conveyor interface Europe interface 15 1-1 / 4 air valves 890L / 1 core puller Hydr Cooling water in the outlet opening and 2 distributors on each of 8 cooling circuits The machine was partially overhauled in 2018 This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN. Application Types Injection Moulding

Condition: good (used), Year of construction: 1997, Ref. no.: 17505 Hersteller: DEMAG Type: ERGOtech system 350-80 Year of construction: 1997 Clamping unit Clamping force: 35 ton Opening stroke: 350 mm Csliewhggtsqzggegt Distance between tie bars: 320 x 320 mm Mould height min.: 180 mm Platen size (h x v): 460 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 20 g Injection pressure: 2868 bar Measurements and weight Dimensions: 3,3 x 1,2 x 2,0 m Machine weight: 2700 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Celiqzgewgni Hogjgt Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: reconditioned (used), clamping force: 220 kN, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, overall weight: 820 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Cgjliqewfpxtjzggot Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2010, operating hours: 75,942 h, Functionality: fully functional, machine/vehicle number: 213141, clamping force: 400 kN, screw diameter: 18 mm, clearance between the columns: 270 mm, Equipment: documentation/manual, Manufacturer: Arburg Type: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 75,942 h Machine number: 213141 Extras - Robot interface - Highly wear-resistant screw - CF drive Cgeliowfua Aoqzggjt - Complete documentation and software (on CF card) - Separation gate German language - From first owner - Made in Germany Continuous maintenance by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 t Tie-bar spacing: 270 x 270 mm Clamping platens: 446 x 446 mm Opening stroke: 350 mm Mold height: 200 mm min. Distance between platens max. 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max. Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrics Pump: 11 KW Heating: 4 zones, 4 KW Installed power: 15 KW Pre-fuse: 50 A Weight: 2150 kg Warranty Warranty until first commissioning Loading/Shipping Free loading onto buyer's truck or carriage paid for Available from our warehouse in Hanover, Germany

Condition: ready for operation (used), Year of construction: 1998, Injection Unit Screw diameter 50 mm Clamping Unit Cgjliqowhgttezgget Clamping force 5000 KN Additional Equipment Removal Handling + Conveyor Belt: WITTMANN Material Conveyor: MOTAN Metal Separator: S+S This DEMAG Ergotech 5000-1450 was manufactured in 1998. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech 5000-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 1997, Ref. no.: 18552 Hersteller: BOY Type: 22 M Year of construction: 1997 Clamping unit Clamping force: 22 ton Opening stroke: 200 mm Distance between tie bars: 254 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 425 x 400 mm Csliowgp Dfoqzggogt Injection unit Screw diameter: 28 mm Injection volume: 49 cm³ Shot weight: 44 g Injection pressure: 1069 bar Measurements and weight Dimensions: 2.3 x 0.81 x 1.63 m Machine weight: 760 kg

Condition: reconditioned (used), Functionality: fully functional, clamping force: 805 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Coliqzewfpqceggjgt Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Year of construction: 2006, Condition: ready for operation (used), This Arburg 320 C 500-100 was manufactured in 2006. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg 320 C 500-100 hydraulic injection moulding machine. Contact us for more information. Application Types Celiqzgswhgrcogsgt Injection Moulding

Condition: good (used), Year of construction: 2017, Ref. no.: 18542 Hersteller: ENGEL Type: Victory 500/110 tech Year of construction: 2017 Clamping unit Clamping force: 110 ton Opening stroke: 500 mm Mould height min.: 300 mm Opening width: 800 mm Platen size (h x v): 740 x 680 mm Injection unit Screw diameter: 40 mm Injection volume: 251 cm³ Shot weight: 225 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,9 x 1,5 x 2,0 m Machine weight: 7,4 kg Additional information & extras Cgjliqzgowgp A Usgst Core pull: 4 pcs Air valve: 1 pcs Robot Producer: Sepro Type: S5-15 Year: 2016 Weight: 430 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 33,063 h, Functionality: fully functional, clamping force: 220 kN, screw diameter: 22 mm, injection pressure: 1,732 bar, injection weight: 27 g, Newly refurbished, we have this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Fitted with a 22mm diameter screw, which gives a max shot weight PS (g) of 27. Cgeliqzgswak Edjgst Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Condition: ready for operation (used), Year of construction: 2001, Control Unit Model Ergo control Injection Unit Screw diameter 70 mm Clamping Unit Clamping force 5000 KN Opening stroke 810 mm Celiqzgowhgtmogogt Additional Equipment Removal handling + conveyor belt WITTMANN Material conveyor MOTAN Metal separator S+S This DEMAG Ergotech 5000-2300 was manufactured in 2001. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech 5000-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2011, Ref. no.: 18496 Hersteller: ARBURG Type: 570 C 200-800 Golden Edition Year of construction: 2011 Clamping unit Clamping force: 200 ton Opening stroke: 520 mm Distance between tie bars: 570 X570 mm Mould height min.: 300 mm Opening width: 950 mm Cgelijwgp Aueqzggot Platen size (h x v): 795 X795 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 291 g Injection pressure: 2470 bar Measurements and weight Dimensions: 5,6 X 1,8 X 2,3 m Machine weight: 7450 kg

Condition: reconditioned (used), operating hours: 40,662 h, Functionality: fully functional, clamping force: 306 kN, screw diameter: 28 mm, injection pressure: 1,340 bar, ejector stroke: 80 mm, total length: 2,520 mm, total width: 860 mm, total height: 1,900 mm, overall weight: 1,150 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 30M injection moulding machine. Coliqzev S D Svoggogt Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Cgelowchwijiqzgget Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 2500 kg Control Unit Brand KRAUSS MAFFEI Cgeliowg Iafjqzggst Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 200 N This Krauss Maffei 200-750 CX was manufactured in 2010. A hydraulic injection moulding machine, it represents a solid choice for your production needs. Consider the opportunity to buy this Krauss Maffei 200-750 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,793 h, General Data Machine weight 6700 kg Control Unit Brand KRAUSS MAFFEI Clamping Unit Clamping force 420 Cgsliqzgswg H U Ijgot Additional Equipment Includes a Kuka Robot KR 30-3 This Krauss Maffei 420-2000 CX was manufactured in 2017, designed for precision in hydraulic injection moulding. Ideal for complex production needs, it offers robust performance and reliability. Consider the opportunity to buy this Krauss Maffei 420-2000 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2018, Condition: ready for operation (used), This HTW PCO 1810 hydraulic injection mold for injection moulding machine was manufactured in the year 2018. Coliqswg Ifujzggegt Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand BATTENFELD Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 350 Opening stroke 1240 mm Distance between bars 800x720 Mould height min 400 mm This WITTMANN Battenfeld SmartPower 350/1000 UNILOG BGP was manufactured in 2016. It is a hydraulic injection moulding machine known for its robust design and efficiency. Ideal for precision plastic processing, consider the opportunity to buy this WITTMANN Battenfeld SmartPower 350/1000 UNILOG BGP. Contact us for more information. Cgeliqzjwg H Uujggot Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, operating hours: 12,750 h, General Data Measurements width 2300 mm Measurements depth 2600 mm Measurements height 1400 mm Machine weight 4450 kg Control Unit Brand ENGEL Model CC300 Injection Unit Screw diameter 15 mm Csliswg Ic Toqzggjgt Clamping Unit Clamping force 350 kN Opening stroke 400 mm Max open daylight 590 mm Mould height min 190 mm Size of mold platens 780 x 400 mm Ejector stroke 100 mm Ejector force for / back 20.1 kN This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available. Application Types Injection Moulding

Year of construction: 2008, Condition: ready for operation (used), General Data Measurements width 2100 mm Measurements depth 4600 mm Measurements height 2700 mm Machine weight 7000 kg Main Drive Spindle speed range 15000 rpm Table Table load 2000 kg This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2008. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 820 S 4000-1300/350 hydraulic injection moulding machine. Contact us for more information. Celiqjwgp Spjzggjgt Application Types Injection Moulding