Used measuring systems for sale (280)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, input voltage: 230 V, We are selling our Primescan 3D scanner with two sensors. It is a demo unit with minimal usage for actual measurement. Very good condition, with every original accessory. It comes with two sensors and one controller, which means that only one sensor can be used at once: 1. R8-FOV500 (8MP sensor with 500mm field of view) 2. R5-FOV200 (5MP sensor with 200mm field of view) It comes with one controller, so only one sensor can be used with controller at the same time! If you need the second sensor for the measurement, you need to change the sensor only, but everything else stays the same: with this configuration you can choose between two resolutions and field of views: if you need to scan smaller parts (up to ca. 200mm) you can use the R5-FOV200 sensor, and when you need to scan bigger parts (up to ca.500mm) you can use the R8-FOV500 sensor. Parts of the system: 1. Sensors: R8 FOV500 and R5 FOV200 2. Controller 3. Tripod 4. Turntable 50, 50kg load capacity 5. Optocat software Gbedpfxeumawgo Aanjw Customs, shipping and transportaion is not included. Training and installation is not included. Please contact me for details, more info!

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output Connectors CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Gbjdpfx Aajy Rlbhenew We will be happy to answer further questions by telephone.

Condition: ready for operation (used), Year of construction: 2015, A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible. Gjdpfx Aajztduionobw

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 230 V, bolt circle diameter: 1,000 mm, arm reach: 2,000 mm, Equipment: documentation/manual, A FARO measuring arm is used for precise, portable 3D measurements and quality control across various industries as it enhances the accuracy of traditional measuring methods, reduces errors, provides reliable data for decision-making, and increases efficiency through direct integration with computer-driven processes and software. Why use a FARO measuring arm? Accuracy and Precision: A FARO measuring arm delivers highly accurate 3D measurements, resulting in more consistent and reliable outcomes compared to manual methods. Portability: The arm is portable and can be easily transported and set up at different locations, allowing for flexibility within the measurement process. Quality Control: Manufacturers use the measuring arm for 3D inspections, CAD comparisons, and dimensional analyses to verify and ensure product quality. Efficiency: By providing immediate, precise data, the measuring arm helps prevent errors, reduces rework, and streamlines production processes, leading to faster product delivery and higher customer satisfaction. Gbjdpfxew U Atbj Aansw Data for Decision-Making: The collected measurements provide dependable information that can be used for trend analysis and smarter decision-making by the team. Versatility: The measuring arm can be employed for diverse applications such as reverse engineering, tool certification, and inspection of complex geometries, making it a valuable tool in different production sectors.

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Gbedpfx Aow E I Itoanew Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 2299.001, For sale is a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measurement system designed for automated quality control of optical components such as wafers, sensors, or micro-optics. This machine was developed for precise high-volume inspection of optical components and delivers the highest measurement accuracy, reliability, and flexibility for industrial applications. Thanks to its modular design, the tester can be perfectly adapted to specific production or development requirements. 🔍 Features & Equipment Gbsdpoy R Dzgefx Aanjw • Integrated laser module (940 nm, circularly polarized) for precise optical illumination • High-resolution camera with automatic calibration and large field of view • Robot-based wafer handling (EFEM) for automated loading and unloading • Analysis software for evaluating efficiency, contrast, uniformity, and performance • CE-certified, including safety interlock and cleanroom-compatible design • User-friendly control via touchscreen and integrated GUI system • Connectivity for LAN, power, and compressed air (6 bar) ⚙️ Technical Advantages • Automatic image capture and evaluation of test specimens (DUTs) • Supports customer-specific software modules (DLLs) • Low maintenance, robust construction, high operational reliability • Optional: Z-axis control and wafer flip station 💡 Applications Ideal for research, development, quality assurance, and series production in the following sectors: • Optoelectronics • Sensor manufacturing • Semiconductor technology • Microsystem technology

Condition: like new (used), Year of construction: 2018, functionality: fully functional, warranty duration: 3 months, OFFER FARO QUANTUM 2.5E + SCAN HD Quantum E 2.5m 7 Ejes Serial No W25-E5-17 Model 2100 Volumetric 50m Gbsdpfxovvt N Eo Aansw Quantum M 2,5m 7 axis includes Arm with Bluetooth and Wireless technology, calibration kit, base, plate, 3mm probe, 6mm cables, heavy-duty case, rechargeable bat Polyworks inspector Standard Package, the universal 3d metrology software platform for dimensional inspection, node-locked license. 2023 (no Mantenimiento) Calibración ENAC, basado en la norma ISO 10360-12:2016 Opcional 8 AXIS + POLYWORKS 2023 + TRIPODE

Condition: used, We are offering 3 units of Heidenhain rotary encoders. 2 units of ROD 426; 1 unit of ROD 426 E. All come with cables and couplings. Gsdpfez Riwvex Aanebw

Condition: excellent (used), functionality: fully functional, Mitutoyo Microscope Head, FS70Z Model: FS70Z Condition: Used General: 1X/2X focus distance, 50mm laser video microscope housing (FS70Z), Mitutoyo-378-185-1 Gbodpfx Aajzh I R Ronow Accessories: Documentation

Condition: used, Year of construction: 2015, Year of construction 2006 CNC controlled video measuring device Measurement software MeasureMind 3D Touch Probe TP200 PC system and 2 x TFT monitor Reflected light, transmitted light, Xoaxiallicht LED ring light Further equipment, software modules, probe changers and accessories optional. Installation and commissioning, individual training possible with us in Remscheid or at your location. Gbsdpfszvl Suox Aansw

Condition: used, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Gbsdpfx Aspvkt Soanjw Model: WT-2000PV Type: µ-PCD Condition: Used

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: J2KN-14043, Equipment: documentation/manual, The analyzer is in very good condition and has not been used since its last certification in 2024. It comes with a complete package, including numerous accessories and options. Gedpfx Aaezy Skxonjbw Robust and comprehensive: The analyzer is housed in its aluminum case, making it compact, easy to carry, robust, and complete. It is equipped with a metal condensation pot with an integrated PELTIER cooler, a dust filter, and automatic condensate drainage via a purge valve. Its aluminum chassis is guaranteed for 10 years. For over 20 years, our customers have praised this type of analyzer! Easy to use: The power supply is integrated into the housing. The long-life cells (up to 6 years in normal use) offer fast response times. You can replace the cells yourself. The ECOM JKNP.expert automatically prints the combustion and emissions analysis report. The report can directly display values in ppm, as well as a second unit, such as mg/m3, referenced to a % of O2. Expandable: It can accommodate up to 6 electrochemical cells. At any time, you can add measurements for SO2, CO%, etc. For long-term measurements: The ECOM JKNP.expert is designed to measure medium and large-capacity boilers equipped with modern, modulating burners for extended periods. Control unit for added convenience: The control unit displays the measurements transmitted to it by the analyzer via radio waves. The measurements remain fast, and the display can be magnetically attached near the burner. CO cell purging with a second pump: In case of poor combustion during the adjustment of a fuel or gas burner, a purging pump automatically limits the over-concentration of CO in the CO cell. The purging system is automatic (starting from 4000 ppm, adjustable) or manual. Work without interruption, in complete peace of mind.

Condition: excellent (used), incl. case, charging socket, measuring cable 16 GB memory card Gsdpfx Aaey Edb Nonobw

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, feed length Z-axis: 30 mm, travel distance Z-axis: 350 mm, Equipment: type plate available, -Leasing options are available!!!- ConturoMatic CV120 contour measuring device – “simply measure contours” -Sample parts can be sent in for free measurement; online demo available after consultation. Also, ask about our leasing options; we will gladly connect you with our partner. ✅ Up to 30% declining depreciation on movable assets* ✅ Valid for investments starting in July 2025* ✅ T&S products are fully eligible for funding* Contour measuring system with feed unit and motorized Z-axis Scope of delivery: - CV120 motorized feed unit with precision guide - External control and regulation unit - Motorized Z-axis - Evaluation computer, desktop version W11/64 bit - 24" TFT monitor - ConturoMatic evaluation software; operating manual - Cable set - CM software updates FREE!!! Technical data CV120: Feed unit (X/Z measuring axis) - Z-axis measuring range: 30 mm - X-axis measuring range: 120 mm - Measuring speed: 0.1-1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe tip lifting function Z-axis - Positioning range: 320 mm, motorized Accuracy: X-axis +/- (1.2 µm + 2Lx/25) µm* [L = mm] Z-axis +/- (1.8 µm + 2Lz/25) µm* [L = mm] Note: Various accessories are available as options to adapt our CV120 to the required measuring tasks and for system expansion, such as different probe arms, universal clamping devices, or customer-specific part holders. Probe arms with tip lengths from 2.5 to 59.5 mm available... * according to specification T&S/CV120 -Subject to technical changes- Commodity code: 90318020 -2 year warranty- Photos contain special accessories that are not included in the standard scope of delivery. *For legal reasons, we are not permitted to provide any legal or tax advice on this matter, and the above-mentioned information must not be interpreted as advice. If in doubt, please contact your relevant contact persons (specialist department or tax advisor). Gbsdpfsq Nzd Nex Aansw

Condition: refurbished (used), Measuring head Mahr (5313320), type "Millipilot 1332B" for Höfler gear grinding machine, reconditioned. External signs of use are present (light scratches, etc.), but technically the device is in perfect condition and ready for immediate use. Pickup or shipping can be organized at any time. For further questions just contact me. Gbjdjpl T D Uspfx Aanjw

Condition: excellent (used), For sale is a complete, professional non-destructive testing (NDT) kit using the magnetic particle method (MT) from reputable brands Tiede and Blak-Ray, used in industrial quality control, welding, railway, and power industries. The equipment is fully functional, in very good technical and visual condition, and ready for use. The kit includes: • Tiede FSM-2 – magnetic field strength meter, measurement range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional UV radiation meter for inspecting UV lamps in NDT testing • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration sample and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Application: • Inspection of weld seams • Inspection of shafts, axles, and machine components • Testing of railway, power, and aerospace parts • Quality control in industrial production Gedpfx Ajz Slhbjanebw

Condition: used, For sale: PREWI industrial measuring table designed for dimension control of furniture components, panels, and carpentry parts. Technical data: - Measuring area: 2800 × 1050 mm, Z = 65 mm - Digital readout: HEIDENHAIN ND 5023 3X - Measurement in 3 axes - Stable industrial construction - Complete guides and measuring system - Accuracy: Absolute accuracy X/Y +/- 0.10 mm - Typical repeatability X/Y +/- 0.02 mm - Relative accuracy Z +/- 0.05 mm - Typical repeatability Z +/- 0.02 mm - Resolution: 0.01 mm Godpfx Aezc Hwyjanjbw Condition: - Machine is in working order - Inspection possible before purchase - Digital readout functions correctly - No technical documentation available Applications: - Dimension control of furniture panels - Measurement of furniture fronts - Verification of components after CNC machining - Quality control of production The machine is currently in a production facility and is ready for further operation. Inspection and testing of the machine are possible on-site by prior arrangement. For technical questions regarding the measuring table, please call Andrzej at 789 487 841.

Condition: good (used), Length measuring system – SIP – Société Genevoise d’Instruments de Physique Type/Model: SIP 300 M Gbodez Nv Dmopfx Aanew Condition: Used Year of manufacture: 2001 Technical data: Design: Motorized length measuring bench Measuring range: 300 mm Measuring system: Original steel scale Measuring accuracy/uncertainty: 0.25 µm Motorized: Yes Accessories: - Various accessories as shown in the images Request item: Transportation costs will be provided in a separate quote.

Condition: used, functionality: unexamined, machine/vehicle number: TDS 694C, Used Tektronix TDS 694 C 3GHz 10GS/s Digital Real-Time Oscilloscope. Manufacturer: Tektronix Model: TDS 694 C 4 channel, 3GHz, 10GS/s Voltage: 100-240V Gedpjxlib Sofx Aanebw

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Max load: 100 kg Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Godpfx Aajzikb Ionebw Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: used, Mahr 865 SE indicator calibrator with 1505 IC indicator + 1299 IC/S printer Mahr 865 SE indicator calibrator with 1505 IC indicator + 1299 IC/S printer Height-adjustable table You can find other indicator calibrators in different sizes – new and used – in our shop! International shipping costs available upon request! Gbsdpfx Aajihpvhensw

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: fully functional, For sale is a high-quality digital microscope, the KEYENCE VHX-7000 – a fully integrated system for material analysis, defect analysis, quality control, research, and industrial inspection. The VHX-7000 combines ultra-high-resolution 4K imaging with intuitive operation and advanced measurement functions, including automatic focus stacking, image stitching, 2D/3D measurements, and multi-angle observation. As one of the world's first digital 4K ultra-high-precision microscopes, the system delivers exceptional image quality at SEM level while combining the speed and ease of use of optical microscopy. Included configuration: Main system: KEYENCE VHX-7000 Controller Unit Camera: KEYENCE VHX-7020 High-Performance Camera Optics & Adapter: KEYENCE VH-Z20T Zoom Lens / Objective (20x–200x) KEYENCE VH-K20 360° Multi-Function Side View Adapter KEYENCE VHX-20T Tripod Adapter Mechanical components: KEYENCE VHX-S750E Motorized XYZ Stage (40 mm) Software & Accessories: KEYENCE VH-H5M 3D Measurement Software KEYENCE VHX-A70D Console for the VHX-7000 Swiss power cable/adapter Original manuals Key features: 4K Ultra-HD imaging Seamless magnification from 20x to 6000x Fully motorized operation Multidirectional lighting Gbedpoy U Iy Iefx Aanjw Real-time 3D and roughness analysis Automated focusing and positioning User-friendly touch operation Ideal for industrial inspection, electronics, materials science, metallurgy, and R&D laboratories

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Gsdpfxoy Uvhyj Aansbw Width:800mm Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, Stacja pipetująca CyBi-FeliX z CHOICE Head, 8-channel Choice adapter 10-1000uL i 0,5-50 uL Rok produkcji: 2021 Marka: Analytik Jena Gbodeumtkaspfx Aanew Model: Cybio Felix Choice

Condition: used, functionality: unexamined, machine/vehicle number: C320, Used Sokkia C320 Level – Surveying instrument with accessories Description: Automatic level Sokkia Gedpfexiw Diox Aanobw Manufacturer: Sokkia Model: C320 Complete with new tripod (in box), extendable aluminium measuring rod, level in original case with manuals and accessories.