Condition: used, Nikmann FS 41N planer and thicknesser Gbjdpfx Asya Drvel Sju - Planing width: 41 cm - Shaft with 4 knives - 2 table rollers - Motor with brake Machine in very good, excellent condition.

Condition: used, Year of construction: 2020, Planing line Lifting table Cross conveyor Loading table Planer Leadermac 36 m/min Output table Gbedswtcm Hspfx Al Sju Cross conveyor Mechanization manufactured in 2020

Condition: used, Year of construction: 2005, Working width: 180 mm Working height: 110 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power (bottom & top spindle): 7.5 kW Motor power (right & left spindle): 7.5 kW Adjustment (bottom spindle): - Adjustment (right spindle): - Adjustment (left spindle): handwheel Adjustment (top spindle): handwheel Planer heads (bottom & top): Centrolock Planer heads (left & right): Centrolock combined with profiling capability Feed speed: 2 Feed roller pressure: spring Current consumption: 32.8 A Extraction connection: Machine length: Gsdpeyq R Aisfx Al Ssbu Machine width: Weight:

Condition: like new (used), functionality: fully functional, Hydraulic feeder type 814 300 Gsdpfxjyi Afmj Al Ssbu 80 m/min. Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: used, Year of construction: 1993, Working width: 500 mm Cutter block: Leitz - Centrofix Number of knives: 4 Surfacing table length: 2800 mm Surfacing table adjustment: Lever Chip removal display: Scale Adjustable fence angle: Yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Gbsdpeyhgiaofx Al Sju Weight: 900 kg

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Gbsdpfjyhgkdjx Al Ssu Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: good (used), Pressure shoe for Weinig planer and moulder Gbedpjyryzkjfx Al Sou

Condition: like new (used), functionality: fully functional, Knife shaft Z4, in like-new condition. Planer shaft Z4. 1 unit for the bottom. 1 unit for the top. Originated from K133, and we can also shorten it by 300 mm for K103. 40% cheaper than a new one from the manufacturer. Gbedpjyur N Eofx Al Seu

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Gedpfx Asvrq U Dol Sobu

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed. Gedpfx Alewgbw Ro Sjbu

Condition: used, AD planer Rojek 410, good condition, year 1997, standard equipment, 3.4 kW S1, 400 kg Gbsdpowzzg Ujfx Al Seu Price changes reserved, errors, printing and typesetting mistakes excepted.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input current: 123 A, input frequency: 50 Hz, planing width: 630 mm, total length of planing tables: 2,900 mm, overall weight: 2,890 kg, workpiece width (max.): 630 mm, workpiece height (max.): 75 mm, number of planer blades: 15, operating speed: 333 mm/s, planer shaft diameter: 122 mm, table length: 2,900 mm, table width: 630 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, MADORA Sp. z o.o. is a Polish manufacturer of industrial machinery, specializing in woodworking and metal processing equipment. Since 2013, we have been delivering reliable, high-quality machines designed for both small workshops and large-scale production facilities. All our machines are designed and built in Poland, ensuring European quality, durability, and performance. Whether you're looking to expand your woodworking capabilities or modernize your workshop, our solutions are built to meet professional expectations while remaining user-friendly and cost-effective. The DYRA 630 is a multifunctional combination machine capable of performing three machining operations in a single pass. Gsdpfowz D Stsx Al Sebu Its versatility and multi-functionality result from its three machining zones: - Planing machine zone - Thicknesser machine zone - Multi-rip saw zone

Condition: used, Year of construction: 2001, functionality: fully functional, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, – German-made – Year of manufacture: 2001 – Total power: 42 kW – Driven rollers in the table TECHNICAL SPECIFICATIONS: – Planing width: 230 mm – Planing height: 170 mm – Electric height adjustment – Spindle diameter: 40 mm – 1st (bottom) spindle: 7.5 kW – 2nd (left) spindle: 11 kW – 3rd (right) spindle – 4th (top) spindle: 11 kW – 5th (bottom) spindle: 5.5 kW – Continuously variable feed speed: 6–38 m/min – Feed motor power: 4 kW – Infeed table length: 1000 mm – Electric brakes – 5 driven top steel rollers – 1 driven top rubber roller – 2 driven table rollers: one is toothed – Air cushion in the table – Pneumatic pressure system – Feed via cardan shafts – Outlet diameter: 5 x 140 mm – Centralized table lubrication system Godpjw H Smhsfx Al Sjbu – Machine dimensions (L/W/H): 390 / 210 / 230 cm – Weight approx. 4000 kg

Condition: used, functionality: unexamined, Planing machine with planing shaft at the top and bottom Double-sided planing machine Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Electrical connection 61 kW Jointing device at the bottom and top Gsdpfjy Ryx Ujx Al Sobu Machine mounted on 2 steel supports, which are approximately 1.5 m longer than the machine Year 1990 Condition: good

Condition: used, functionality: fully functional, Planing width max. 230 mm Planing height max. 120 mm Number of spindles 4 Spindle speed max. 6,000 rpm Feed table length approx. 2,000 mm Motorized adjustment of planing width, planing height Feed rate max. 24 m/min Emergency stop Dimensions approx. (L x W x H) 4,100 x 1,500 x 1,600 mm Gjdpezdk Dfofx Al Ssbu Weight approx. 2,800 kg

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Godpfozdpc Tjx Al Ssbu Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: used, Year of construction: 2004, Speed 60 m/min Capacity 260/150 mm Tool holder diameter 50 mm Gbodpfx Aozc Nb Ijl Sju Composition: Lower spindle sander 15kW Planer straight 11 kW Gauche planer 11 kW Top planer 15 kW Planer straight 11 kW Gluing left? Wait: 'Raboteuse gauche 11 kW' in French means 'Left planer 11 kW'. Planer for top finishing 15kW Planer bottom finishing 11kw Drive power 11 kW 8 workstations Digital positioning Chrome table Counterplayers Lubrication 400 V

Condition: used, Four-side planer WEINIG P23 - used - Gbedpey Dhtysfx Al Sou 6 spindles Turn-knife system, Profiling device, electric height adjustment, lubricant pump, dust tested ----- Technical Data ----- Planing width: 230 mm, Planing height: 120 mm, Number of spindles: 6, Spindle motor 1: 5.5 kW, Spindle motors 2 + 3: 7.5 kW, Spindle motor 4: 7.5 kW, Spindle motor 5: 5.5 kW, Spindle motor 6: 4 kW, Feed speeds: 5–24 m/min., Extraction connection Ø: 6 x 140 mm, Dimensions (LxWxH): 4,000 x 1,700 x 1,600 mm, Weight: 3,200 kg

Condition: good (used), Year of construction: 2007, - Planing width (mm): 230 - Planing height (mm): 140 - Spindles: 6 1st spindle: bottom 2nd spindle: right 3rd spindle: left 4th spindle: top 5th spindle: top 6th spindle: bottom - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planing heads Powerlock system Gedpfx Aley Ayg Ae Ssbu - Program memory - Soundproof hood - CE compliant

Condition: used, Set of 2x Weinig Powerlock L=270 Z=2 heads Model 536, diameter 93 mm Gbsdpfxoydk Rgo Al Sju 536.095.25 Top 536.095.24 Bottom Centrolock reversible knife system Z2 Mounting: PowerLock HSK Attention: Price 600 Euro is for a set of 2 pieces

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Gjdpfxsx Sxfvs Al Sebu Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.

Condition: repair required (used), Thickness planer Gjdpfx Ajyh Ut Rel Ssbu Manufacturer: SCM Model: S63 B Year of construction: N.A. Working width: 630 mm Max. workpiece height: 240 mm Min. workpiece height: 3 mm Max. stock removal: 8 mm Table size: 630 x 1,000 mm Power: 5.5 kW Knife type: Tersa Number of knives: 4 Outfeed roller: Steel 1x table roller, driven Height adjustment: Electric - Manual Feed speed: 6 - 18 m/min; infinitely variable Speed: 4,500 rpm Dimensions: 1,250 x 1,050 x 805 mm Weight: 825 kg

Condition: new, Catalog number: S 0335 - New machine, in stock - CE certificate PLANER: - Work table dimensions: 1500 x 320 mm - Max. cutting depth: 5 mm - Dimensions of the aluminum guide rail, mm: 1100 x 155 Gbodpfx Alszh H N Ej Sju JOINTER: - Work table dimensions: 316 x 600 mm - Max. cutting depth: 3 mm - Cutting speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Milling head speed, min-1: 5600 - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with a ground surface, * Tables with precise adjustment for longitudinal planing, * Stable aluminum guide rail (fence) with the ability to tilt from 90° to 45°, * Milling head guard, * Work table for the thickness planer with a central guide column and carriage, * Power on/off without stopping the machine, * Mortising machine with left-hand rotation. Net price: 14,500 PLN Net price: 3,372 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, Planer heads for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Technical data: - Blade: Z2 strip planer blade - Cutting circle (ø): 130 mm - Bore: 50 mm Gbjdpfx Alozrylbo Sou - Length: 50 mm - Material: Steel

Condition: used, Technical data: - Flight circle (ø): 125 mm - Bore: 35 mm - Length: 180 mm - Material: Steel Gjdpfjzryluox Al Sjbu