Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: 2TM00006306, The standard STM units reach a maximum temperature of 200°C/392°F, the STM-HT units reach a maximum temperature of 300°C/572°F. Djb Hahev Unycstcout PID controller with a 4.3-inch LCD display with a user-friendly interface. Weekly timer with °C/°F unit conversion. Uses a digital multi-stage PID controller for a stable mold temperature with an accuracy of ±0.5°C/0.9°F. SSR solid-state relay. The standard STM units are equipped with an efficient high-temperature pump. The STM-HT units feature a magnetic pump. Stainless steel housing for high-pressure explosion protection without leakage. Multiple safety and warning devices, e.g., phase failure, pump overload, pump overheat protection, and low oil level alarm. Stainless steel heater. Equipped as standard with a flow indicator and pump reversing function for oil return. RS485 interface for centralized adjustment and monitoring. Standard buzzer.

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Dsb Haov U Da Sehtceut Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Condition: like new (used), Year of construction: 2019, Engel DUO12060/900WP (ECO-Drive) Year : 2019 CC300 controll Clamping force: 900 ton Opening stroke: 1800 mm Tie Bar distance: 1420x1170 mm Platen size: 1850x 1810 mm Injection unit DUO12060 Screw : 120 mm S8 Injection volume: 6107 cm3 4 core pulls + 2 cores 4 cascades e-flomo Eco drive Removable tie bar Magnetic plates Viper 40 robot Linear Air valve - 2 Machine has only Hours: 9000 hours! Like new. Duob Hahetiliaetcjt More info on request.

Condition: reconditioned (used), clamping force: 30 kN, screw diameter: 28 mm, injection pressure: 1,340 bar, injection weight: 49 g, Awaiting refurbishment at our headquarters is this BOY 30M injection moulding machine. Duob Haovvkvvohtcjt Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 1999, operating hours: 86,200 h, Functionality: fully functional, clamping force: 11,000 kN, screw diameter: 150 mm, column diameter: 230 mm, displacement volume: 10,955 cm³, injection pressure: 1,330 bar, ejector force: 215 N, ejector stroke: 300 mm, opening stroke: 1,800 mm, plate width: 1,400 mm, plate height: 1,150 mm, overall weight: 77,000 kg, heating capacity: 113 kW (153.64 HP), Equipment: documentation/manual, This injection molding machine, manufactured in 1999, features a robust design, weighing 53 tons and a clamping force of 11,000 kN. It is equipped with a hydraulic clamp, M24 clamping threads, an ENGEL robot for automation, and a pivoting mechanism offering great versatility, making it ideal for efficient large-scale production. Please contact us for more information on this ENGEL 1100 T injection molding machine. Dusb Hahowdulistcst - The material feed hopper can be provided free of charge with the machine. - Linear Engel robot + robot cell

Condition: ready for operation (used), Year of construction: 2017, operating hours: 21,445 h, Control Unit Brand FANUC Injection Unit Screw diameter 32 mm Dsb Hajvxbpxjhtceut Clamping Unit Clamping force 1250 KN Opening stroke 350 mm Size of mold platens 660 mm × 610 mm Additional Equipment Equipment: Robot Wittman W818 (2015) 8000 € extra This FANUC α-S100A was manufactured in 2017. It is an electrical injection moulding machine, ideal for precision plastic parts production. Consider the opportunity to buy this FANUC α-S100A electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2024, Condition: new, Functionality: fully functional, High-precision servo motor for fast dosing. Equipped with a 1:5 gearbox to increase torque Dsb Hahjv Unwuetcsut and reduce overload. Feed rate from 0.1-130 kg/h per screw. Simple and user-friendly touchscreen control. Longer service life thanks to chrome-plated dosing screw. Modular design for easy assembly, disassembly, and cleaning. Synchronization of the masterbatch dosing ratio with the extruder speed in extrusion mode. Uninterrupted production recovery in the event of a power failure. Up to 50 mixing ratios can be stored. Monitoring via alarm and shutdown in the event of masterbatch blockage and overload. Supports micro-dosing mode; masterbatch is dosed once per X-cycle. The volumetric high-temperature dosing unit with water cooling tank can process materials that reach a drying temperature of 180°C. Modbus RTU data communication via RS485.

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Dobjv Uqf Io Hahtcout Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing - 2 × side feeders - Segmented screws and barrels

Condition: excellent (used), Year of construction: 2015, Engel Victory 330/180 tech (2015), duroplast, Engel VIPER 40 linear robot Clamping force: 180 t Screw diameter: 35 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Controll CC300 Engel Viper 40 Linear Robot Engel Rotofeeder BMC50 The machine 202463 has proportional valves for the cap, injection, ejector, 3 x cores and controlled 2 hydraulic servo pumps Dsb Hahtjvply Nocout Machine was using DUROPLAST MATERIAL Approx 30.000 hours

Condition: good (used), Copy milling machine Window router Rotox Type EKF 3 Dueb Herwfnzeahtcjt with 3 milling spindles length 800 mm width 650 mm height 1500 mm

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW Duob Hsvrubnsahtcjt

Condition: ready for operation (used), Spare parts package for Kiefel KMD 85 consists of electronics, gears and motors see photos. Chain transport is not included in the pictures. Djb Hahtoq Evmcjcjut

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 2ZX00002043, Equipment: documentation/manual, The SS-S1 series sprue pickers are designed for the fast and precise removal and/or separation of sprues/molded parts from the injection molding machine. Dujb Haov Unrrohtcot They can deposit the sprues directly into a granulator for recycling, and the molded parts into suitable containers or onto conveyor belts if necessary. Suitable for injection molding machines with clamping forces up to approximately 250 tons.

Condition: used, Twin screw extruder 34mm diameter 400 volts, 128 amps 2 pairs of spare screws Used for powder coatings Hourly output 250-400 kg depending on the product Deb Hov U Nnujahtcjut

Condition: excellent (used), Year of construction: 2013, Control: UNILOG B6 Closing force: 4500 KN Distance between columns: 950mm x 700mm Minimum height of mold assembly: 330mm Maximum height of mold assembly: 780mm Screw diameter: 65mm Proper injection pressure: 2070 bar Maximum injection weight: 980.9 g ServoElectric injection unit Servo Packaet S0 Dsb Hahtju Hiwweceut ServoPower package S1 (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo electric (Knodler) with jet actuator, injection speed 400 mm/s (servo injection control significantly reduces electricity costs and supports precise regulation injection process) Electric ejector with a force of 60 KN and a path of 180mm Additional equipment: 1\. Air valve 2\. Cooling water flow regulator 3\. Digital interface for the temperature regulator (possibility of controlling six thermoregulators simultaneously) 4\. Interface for controlling the needle cutting off the nozzle in the tool 5\. Interface for controlling the external hot runner regulator 6\. Full integration for the Wittmann W8xx series robot 7\. Button for quality control Language : Polish

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Duob Hajv Uzq Uohtcot Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: good (used), Functionality: fully functional, Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Deb Hsvtxmwoahtcjut Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Year of construction: 2008, Condition: refurbished (used), Functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.22 - Year: 2008 Dobewc Dhds Hahtcout - Double parallel screws ø87mm 22D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 200kg/h profile - 300kg/h tubes Very good condition

Condition: like new (used), Year of construction: 2009, operating hours: 49,500 h, Functionality: fully functional, machine/vehicle number: 172007, clamping force: 100 kN, screw diameter: 35 mm, Machine from clean room production. Dueb Hajwcki Ijhtcjt

Condition: good (used), I will sell an aggregate/injection molding machine for the production of polystyrene boxes such as fishbox, thermobox (3 sizes of boxes - adjustable mold). The price includes a set, i.e.: - injection molding machine, aggregate, automatic machine for the production of polystyrene EPS shapes - very good condition, year of manufacture 2023. - configurable mold for the production of thermoboxes - 3 sizes of boxes. With appropriate equipment, it is possible to produce high-density blocks and shapes (70-90 kg / m3) on the above set used for cutting shapes for warm assembly under windows, doors, HS Along with the line, the transfer of copyright to the box designs. We also have other elements/devices for sale, such as: - injection molding machine, aggregate, machine for the production of EPS polystyrene foundation plates + plate mold Duob Haeua Dqiehtcot - Certus container steam boiler room (oil steam generator) - EPS foamer - steam installation: boiler room - machines - 3m3 steam tank - installation for transporting foamed EPS - EPS silos - polystyrene crusher - many spare parts Possibility to send more photos and information by email. Possibility to sell individual components of the set separately.

Condition: used, Year of construction: 2004, clamping force: 500 kN, clearance between the columns: 320 mm, column diameter: 320 mm, Clamping force: 50 t Distance between tie bars: 320 x 320 mm Platten dimensions: 540 x 530 mm Screw diameter: 30 mm Injection pressure: 1995 Injection volume: 106 cm3 Dueb Hahovx Ngfotcot Shot weight: 94 g 1 x air valve Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Injection Unit Screw diameter 60 mm Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Max open daylight 1130 mm Mould height min 250 mm Dob Hahswg H Uzjtcout Mould height max 550 mm Additional Equipment Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 8.9 kW (12.10 HP), Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW Dujb Haevrubhjhtcot

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Dsb Heu Dbkdeahtceut Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 9.5 kW (12.92 HP), Labotek dryer Dueb Hahtovrubbecst Type: DDM 120-S Power: 9.5 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW