Condition: used, Year of construction: 1990, Functionality: fully functional, machine/vehicle number: 64415, clamping force: 3,300 kN, clearance between the columns: 625 mm, pressure: 2,015 bar, Injection molding machine Stork ST 1600 - 330 Fgjbvbf Ssvpfbtegsb

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 28460, clamping force: 3,500 kN, screw diameter: 55 mm, clearance between the columns: 950 mm, overall weight: 5,000 kg, pump power: 45,000 W, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, ENGEL ES1350/350 HL Injection Molding Machine with Robot – Year 1995 Specifications: Fgebvbjwglwbsf Sgjb - Manufacturer: ENGEL - Model: ES1350/350 HL - Year: 1995 - Clamping force: 3500 kN (350 t) - Control unit: Core pull on moving platen - Robot included: ENGEL ERC 53/2-CL (1995) Condition: Machine is fully operational and currently running in a continuous production cycle. Included: - Take-out robot - Full documentation - Electrical and hydraulic diagrams Location: Poland

Condition: used, Functionality: fully functional, Two YUDO "Bold 3" hot runner units are available for sale. The unit has 12 hot zones and a 63A plug. Spare parts are still available, and a user manual is also available for this unit. L: 150 mm W: 100 mm Fgobvbov Smnajf Sgob H: 80 mm

Condition: used, Year of construction: 2007, Engel VICTORY 330/60 Tech (2007) Closure system: Hydraulic Closure force: 600 kN Tiebarless Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Fgebvbf Sov E I Twsgob Injection volume: 154 cm³ Injection pressure: 2,400 bar

Condition: used, Year of construction: 2017, operating hours: 30,000 h, clamping force: 300 kN, screw diameter: 55 mm, displacement volume: 511 cm³, injection pressure: 1,620 bar, overall weight: 17,000 kg, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Fjbvbfev R Hlpe Sgegb

Year of construction: 2025, Condition: new, compounder with segmented screws, 25 mm - 32 l/d with atmosperic degassing, melt pressure sensor and die-plate die-face pelletizer made from stainless steel, housing is swivelling Fgjbvsf Uc Uyebf Sgob lenght of granules is adjustable by means of the cutting speed This compounder is built to order.

Condition: excellent (used), Year of construction: 2008, Ferromatik Milacron Type: K-TEC 85-S Injection molding machine (85 tons) Serial number: 522500 Year of production: 2008 Fsbsvk Dbzovbf Sgjgb Machine weight: 5500 kg Screw diameter: 25 mm Closing force: 850 kN Working hours: 24.386h.

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Fgjbvbfjwg Sgcs Sgeb Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: used, Functionality: fully functional, The hot runner device CW 662 is a 6-way device from YUDO and is for sale, of course with a BA for the device. Febvbfsv Smmcs Sgsgb

Condition: excellent (used), Year of construction: 2008, operating hours: 53,000 h, clamping force: 2,800 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 590 cm³, injection pressure: 2,150 bar, injection weight: 570 g, BMB 280 T hybrid injection molding machine with electric closing and plasticizing Clamping force: 280 T Screw diameter: 55 mm L/D ratio: 25 Maximum material pressure: 2150 bar Injectable volume: 590 cm3 Fgobvbev Rzvvef Sgjb Injectable weight in PS: 570 g Plasticizing capacity: 65 g/sec Passage between columns (H x V): 630 x 560 mm Plate dimensions (H x V): 910 x 840 mm Mold thickness min / max: 200 / 650 mm Max opening stroke: 600 mm 2 hydraulic cores Blow guns: 2 Weight: 13 tons

Condition: excellent (used), Year of construction: 2018, Tempereigreat Main tech Type: 18WTR00016 Year 2018 3 pieces available Fgjbsvbg Tnjvbf Sgjb

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons Fsbvsu Ti Srebf Sgsgb More photos on request.

Year of construction: 2017, Condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Fgsbvbf Sjvcynujgjb

Condition: new, Functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Fgsbvbf Sjwg Sd Uogob

Condition: used, Two Günther hot runner units are for sale, one with 15 channels. Febsv Sml Sjvbf Sgjgb L: 470 mm W: 370 mm H: 150 mm Weighs approximately 4 kg Connector: 16 V/400 A

Condition: new, Functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off Febvborg Ebcsf Sgegb - Control system

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Fgsbvbf Soikfmhsgeb

Year of construction: 2025, Condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Fobvbjwg R Rtjf Sgegb

Condition: ready for operation (used), The Deltatherm temperature control device is for sale, of course with the device's operating instructions. All spare parts are still available from the manufacturer. Fsbvbf Sjiw H Ubogegb Quantity: 1 piece/ price per device Medium: oil Heating output: 18KW Max. temperature: 200 degrees Pump flow rate: 100l/min Discharge pressure: 3bar Dimensions, W: 400mm D: 765mm H: 1310mm Weight: 150KG

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR Fgsbvbf Sop Audqegjb INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Year of construction: 2014, Condition: excellent (used), For sale: Screw and barrel for Engel 750 injection unit. Screw Diam. 60 mm Fgjbjiw Dt Devbf Sgjb

Condition: like new (used), 300 mm intermediate plate for Krauss-Maffei KM 800. Original Krauss-Maffei Fgobvbf Seh Hlr Eogsb

Condition: like new (used), Year of construction: 2014, operating hours: 37,000 h, Functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, injection pressure: 1.877 bar, injection weight: 980 g, spindle diameter: 70 mm, Krauss-Maffei 420-2000 CX Krauss-Maffei injection molding machine. 420 tons of clamping force. Excellent condition, only 37K hours of work. Year 2014. MC5 touch control. Yaskawa Anthropomorphic 6-axis robot, safety grid and conveyor belt. 12 hot runner zones, 2+2 Noyos. Accumulators. The Injector is delivered RE-Conditioned by our technical team and in optimal working conditions. We can offer to your company the Start-up service with which we guarantee the operation. Technical Details WORKING HOURS 37.326 YEAR OF MANUFACTURE 2014 DISTANCE BETWEEN COLUMNS 800x800mm INJECTION VOLUME 1078 cm3 INJECTION WEIGHT 980 gr INJECTION PRESSURE 1877 BAR SPINDLE THICKNESS 70mm MINIMUM MOLD THICKNESS 380mm MAXIMUM MOLD WEIGHT 6700 Kg Fsbsuk E R Tevbf Sgsgb CLOSING POWER 4,200 kN

Condition: excellent (used), Engel CC100 complete control. Tested in our facilities and in good working order. Febouaf D Dovbf Sgegb

Condition: reconditioned (used), We have a large stock of hydraulic valves for injection molding machinery. Fgsbvbst Hfw Ejf Sgeb