Year of construction: 1996, Condition: ready for operation (used), This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. See attached PDF for all accessoires. Crslijibatgoqy Dljb – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Condition: good (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 313880, More detailed information can be found in the photos. This vehicle can be viewed and tested by appointment. Croliqyowag Sas Dlsb

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Brand: Illig Cjliqy Dsv Eqbdjlorb Model: VHW 90/4b Year of Manufacture: 2014 Material Width on Feed Side: 900 mm Max. Material Thickness: 2.5 mm Total Connected Load: 75 kW Material Draw-Off Speed (Min - Max): 1 - 35 m/min Max. Heating Roll Temperature: 140 °C Diameter of Heating Rolls: 600 mm Number of Heating Rolls: 4 Material Discharge Height (Min - Max): 1000 mm – 1400 mm

Condition: ready for operation (used), Dry air volume: 120m³/h, connected load: 15.4kW, heat output: 10.5kW. On-site inspection is possible. Crjlevvwpceiqy Dlob

Condition: reconditioned (used), > Completely overhauled and newly painted. Celiqefua H Asy Dlerb

Year of construction: 1996, operating hours: 24,222 h, Condition: good (used), This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 80M - Year of construction: 1996 - Screw diameter: 42mm Coliqy Dspwh Aksljrb - Shot volume: 200 cm³ - Clamping force: 80T - Working hours: 24,222

Condition: good (used), Year of construction: 2001, Functionality: fully functional, A complete welding and plastering line for components up to 3.5 m x 3.5 m is for sale. Creliqy Dswag Ubolsb See photos for more details. The system will be replaced at the end of July 2025.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, FORMING AREA - 500 mm X 300 mm HEIGHT OF FORM - max. 160 mm MOULD WIDTH - max. 580 mm FORM CLOSING FORCE - max. 230 kN TACT NUMBER - max. 34.3 /min. Pre-Heating unit - VHW 60/2b (option) Web-Grinder - ILLIG RS 75b Top and Bottom Heater Central Pump Croliqyov Ep Uvj Dljb Plug Assist servo drive Stacking table

Condition: reconditioned (used), > Sealing machine with 4 stations. Celiqyofua Dco Dlorb > Lift-in and lift-out station. > Further details on request

Condition: good (used), Year of construction: 1999, operating hours: 37,400 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 78 cm³, injection pressure: 2.2 bar, overall weight: 2,350 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. Crjliqjrg Hcyoy Dljb - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Condition: reconditioned (used), > With additional carton applicator. > completely overhauled. Cjliefua Rieqy Dlsrb

Year of construction: 1995, Condition: ready for operation (used), This Granulator from Rapid is in the Plastima Used Machinery machine storage room. The machine is from 1995. Celiqyep Ebh Es Dlorb - Brand: Rapid - Model: 1514 - Roter diameter: 150 mm - Inlet width: 140 x 140 mm - Motor power: 1.5 kW - Number of rotor knives: 2 knives - Year of construction: 1995

Condition: reconditioned (used), > Small moulding machine with the format 350x250x90. > For skinning and blistering of small batches. Crslisfugz Ujqy Dlob > As a sample machine for every company. > Optionally also with upper punch. > Further details on request. > Completely overhauled and newly painted

Year of construction: 1983, Condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 Croljq Tr Tbjiqy Dlsb - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: reconditioned (used), > Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade. > 4 hold-down devices, new wheels and new bearings. > Machine completely overhauled and new painted. > Passage width of 600mm Crolefua Drjiqy Dlsb > Further details on request.

Condition: good (used), Year of construction: 2008, Brand: Rollepaal Pipe Extrusion Technology B.V. Model: CCM 32-170 Year of construction: 2008 Crsliqy Dsui Izfslsb Frequency: 50 Hz Voltage: 220 – 380 Pipe outer diameter max: 170 mm

Condition: reconditioned (used), > 2-column stations (electromechanical) > PP/PVC/PET/PE All materials can be processed > automatic foil unwinding > Film suspension for bottom films > Film transport for multiple gripper and electromechanical drive > Film gripper bar in the heating and forming area > Filling section in bridge design > Filling line extension to approx. 3.000mm > Package and position control in the punching area > Package conveyor belt 1.500mm > Waste cross cutter with waste chute > SPS control Schleicher KSTS 2K > fully functional Cslofua Eleiqy Dlorb

Year of construction: 2001, Condition: excellent (used), This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and has a normal number of working hours for its age. Crjlisn Smghjqy Dleb – Brand: Collin Pilot & Lab Solutions – Model: P200P – Year built: 2001

Condition: reconditioned (used), > completely overhauled and newly painted > Passage width 900mm > roller table Cjliqyefuazts Dlerb

Year of construction: 1991, operating hours: 2,364 h, Condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 Coliqsqpft Ijy Dlsrb - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 2,364

Condition: reconditioned (used), > Top heating with pilot radiator control Crolijfua Hueqy Dleb > Single radiators of the top heating > 2 cooling fans D05 > Automatic preblow and demoulding > Documentation and plans in German > Max. forming area 1210 x 500 > Longitudinal and cross cutter with 6 quick-change squeezing knives > Euro hole punching device (can be retrofitted at extra charge) > completely overhauled

Condition: good (used), Year of construction: 1996, This inspection system is from Zumbach Electronics AG at Plastima Used Machinery in machine storage. The machine is from 2015 and is in good condition. - Brand Zumbach Electronics AG Crsliqyjtpnfbo Dlob - Type Simac 63 - Year of construction: 2015 - Number of cameras 3 - Pipe diameter min. 2 mm - Pipe diameter max. 50 mm

Year of construction: 1993, operating hours: 2,466 h, Condition: good (used), machine/vehicle number: 330,2135,01, Brand: Leistritz AG Model: Micro 27/40 D Type screw: Double screw Year of construction: 1993 Screw Ø: 27 mm L/D Ratio: 40 Working hours: 2.466 Crjliju Aqdkjqy Dlsb

Condition: good (used), Year of construction: 1999, machine/vehicle number: 1770, Brand: Werner Koch Technik GmbH Model: CKT 110 Year of construction: 1999 Dry air quantity: 110 m³ /h Volume bin: 400 L Celiqysu Aqg So Dlsrb

Condition: good (used), Year of construction: 2001, operating hours: 37,400 h, machine/vehicle number: #183455, clamping force: 1 kN, screw diameter: 45 mm, displacement volume: 230 cm³, injection pressure: 1.67 bar, overall weight: 5,100 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN Crjliqysrg Hdls Dlsb - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700