Year of construction: 1995, Condition: ready for operation (used), This Granulator from Rapid is in the Plastima Used Machinery machine storage room. The machine is from 1995. - Brand: Rapid - Model: 1514 Fjb Hop Ebh Esl T D Ujgb - Roter diameter: 150 mm - Inlet width: 140 x 140 mm - Motor power: 1.5 kW - Number of rotor knives: 2 knives - Year of construction: 1995

Condition: excellent (used), Year of construction: 2000, operating hours: 29,600 h, Functionality: fully functional, clamping force: 300 kN, screw diameter: 28 mm, overall weight: 1,250 kg, BOY 30A Year: 2000 Feb Hev Rb Dtol T D Uogb Screw ø: 28 mm Hours: 29,600 h

Condition: excellent (used), Functionality: fully functional, 2 - Urban AKS 1200 head welding machine - Welding length max. 3500 mm - Weld bead limit: 2 mm - Burn-off: 6 mm Fgsb Hjv Rmm Tol T D Usb - Set of support arms

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Closing unit: Closing force [kN] - 400 Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Fjb Hljwa S Uas T D Usgb Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Condition: excellent (used), Year of construction: 2015, Clamping force: 180 t Screw diameter: 35 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Fgsbevplyce Hl T D Usb Controll CC200 Engel Viper 40 Linear Robot Engel Rotofeeder BMC50 Machine was using DUROPLAST MATERIAL has proportional valves for the cap, injection, ejector, 3 x cores and controlled 2 hydraulic servo pumps Approx 30.000 hours

Year of construction: 2019, Condition: used, overall weight: 140 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Fgsbev D N Nds Hl T D Usb

Condition: good (used), Year of construction: 1999, operating hours: 37,400 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 78 cm³, injection pressure: 2.2 bar, overall weight: 2,350 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. Fgsb Hl T Dsrg Hcye Ueb - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Condition: ready for operation (used), Year of construction: 1994, 540mm wide Illig RDKP54D former 1994 with unwind stand Fgsbetza Tqe Hl T D Ueb

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width Fgeb Hl T Dswa S Ime Usb - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: excellent (used), Year of construction: 2008, Demag System 500/900-3300 (2008) Clamping unit Clamping force: 500 tons Platten dimension: 1300 x 1200 mm Distance between tie bars: 900 x 800 mm Mold height min. : 440 mm Mold height max. 880 mm Injection unit Screw diameter: 80 mm Injection pressure: 1855 bar Injection volume: 1779 cm3 Shot weight: 1620 g Transport dimensions Dimensions: 8,7 m x 2.3 m x 2,5 m Weight (clamping unit/injection unit): 16.500/5.400 kg 4x Core pullers Cascade control 2-way hydraulic EUROMAP 67 interface Additional connections for 2 core pulls on the fixed tool clamping plate Feb Hl Toukku Re D Uogb 10-way cooling water flow regulator with temperature display Additional nozzle controller; 1 circuit; PID controller

Year of construction: 1983, Condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Fjb Hl Tjq Tr Tbe D Usgb - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 650/150 injection molding machine Year of manufacture - 2005 Clamping system Clamping force: 1500 kN Plate size h x v: 750 x 750 mm Min. installation height: 300 mm Maximum plate distance: 900 mm Opening stroke: 600 mm Ejector stroke: 150 mm Fgeb Hlowa S Dzs T D Usb Ejector force: 61 kN Centring of moving platen D: 160 mm Centring of fixed platen D: 160 mm Mould weight: 1800 kg Injection system Screw diameter: 45 mm Stroke volume: 318 ccm Injection pressure: 1525 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 290 min Screw torque: 5 N Plasticizing flow: 55 g/s PS Number of heating zones: 5 Dimensions and weight Machine dimensions LxWxH: 5.5m x 1.7m x 2.4m Total weight: 9500 kg

Year of construction: 2001, Condition: excellent (used), This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and has a normal number of working hours for its age. – Brand: Collin Pilot & Lab Solutions Fob Hen Smghsl T D Usgb – Model: P200P – Year built: 2001

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 35 - 100 CX injection molding machine Year of manufacture - 2007 Closing system : Clamping force: 350 kN Mould opening force, max.: 39.9 kN Moving platen feed force Opening: 21.6 kN Moving platen feed force Closing: 16.7 kN Mould platen size (h x v): 540 mm x 540 mm Distance between connecting rods (h x v): 320 mm x 320 mm Mould opening stroke: 350 mm Min. mould height: 175 mm Max. daylight: 525 mm Hydraulic ejector - stroke: 100 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit : Screw diameter: 22mm Ls/D ratio: 26 Injection pressure: 2500 bar Injection volume 38 ccm Injection weight, PS: 35 g Injection speed: 59 ccm/s Screw speed: 365 1/min Fsb Hl T Dowa Szgs Usgb Tank capacity: 215 ltr. Dimensions and weight Machine dimensions: 3.50 m x 1.50 m x 2.00 m

Condition: good (used), Year of construction: 2008, Brand: Rollepaal Pipe Extrusion Technology B.V. Model: CCM 32-170 Year of construction: 2008 Frequency: 50 Hz Voltage: 220 – 380 Pipe outer diameter max: 170 mm Fsb Hl Tsui Izfe D Ujgb

Condition: excellent (used), Year of construction: 2004, Arburg 420C 1000-250 injection molding machine Year of production: 2004 Injection elements: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Injection volume: 188 ccm Closing elements: Closing force: 100 t Fgjbswa Sx Ej Hl T D Ujb Clearance between columns: 420x420 mm Table plate dimensions max: 570x570 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Dimensions: Weight: 3660 kg Length/Width/Height: 4.30x1.64x2.08 m

Year of construction: 1991, operating hours: 2,364 h, Condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 2,364 Fgeb Hloqpft Ij T D Uob

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 Fsb Hswa Svkol T D Uogb - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Year of construction: 1993, operating hours: 2,466 h, Condition: good (used), machine/vehicle number: 330,2135,01, Brand: Leistritz AG Fsb Hl T Dju Aqdkj Uegb Model: Micro 27/40 D Type screw: Double screw Year of construction: 1993 Screw Ø: 27 mm L/D Ratio: 40 Working hours: 2.466

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 50-380 CX injection molding machine Year of production - 2010 Number of operating hours -: 62135 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasive protection, with a screw diameter of 35 mm, with a non-return lock and an open nozzle Tool closing system: - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Mould mounting plate movement force - - -- opening: kN 21.6 -- closing: kN 16.7 Feb Hlswa Si Ds T D Usgb - Mounting plate dimensions (h x v): mm 600 x 600 - Clearance between columns (h x v): mm 370 x 370 - Mold opening path: mm 400 - Mold installation height: mm 200 - Plate opening stroke: mm 600 - Ejector stroke: mm 100 - Ejector force: kN 22.6/9.9 Unit injection - Screw diameter: mm 35 - Injection pressure: bar 2429 - Injection volume: cm3 154 - Injection weight for PS: g 140 - Screw speed, standard, option: rpm 295/375 Equipment: - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 2900 - Oil tank capacity: 1 220 Power supply: - Nominal power of the pump motor: kW 15 - Installed power of the heaters: kW 10.97 Machine dimensions and weight: - Net weight with control cabinet: t 3.0 - Machine dimensions (length x width x height): m 3.8 x 1.4 x 2.0

Condition: good (used), Year of construction: 1999, machine/vehicle number: 1770, Brand: Werner Koch Technik GmbH Model: CKT 110 Year of construction: 1999 Dry air quantity: 110 m³ /h Volume bin: 400 L Fgeb Hleu Aqg Se T D Uob

Condition: excellent (used), Year of construction: 2005, BOY 22A injection molding machine Year of production: 2005 Vertical / horizontal machine Technical data Screw diameter: 22 mm Injection volume: 30 ccm Weight: 28.45 g Injection pressure: 1732 bar Closing force: 220 kN Feb Howa Sbyol T D Uogb Tie bar spacing: 254 mm Plate size: 220 x 400 mm Min mold height: 200 mm Opening stroke: 200 mm Max plate spacing: 400 mm General Installed power: 9.05 kW Operating hours: 21,600 h Dimensions: Weight: 880 kg Equipment Monitor language: German

Condition: good (used), Year of construction: 2001, operating hours: 37,400 h, machine/vehicle number: #183455, clamping force: 1 kN, screw diameter: 45 mm, displacement volume: 230 cm³, injection pressure: 1.67 bar, overall weight: 5,100 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ Fgsb Hl Torg Hdlj D Ujb - Working hours: 58,700

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Fobswa R T Ie Hl T D Uegb Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg

Condition: excellent (used), Year of construction: 2016, ENGEL Duo 4550/500 WPX injection molding machine Year of production - 2016 Fgjb Hl Tswa Ebmj D Usb Viper 40 robot CC 300 control Closing system: Tie bar spacing - 990/1130 mm Min/max mold height - 450/1140 mm Opening stroke - 1400 mm Injection system: Closing force - 5000 kN Injection pressure - 1600 bar Screw diameter - 105 mm Injection volume - 3377 ccm Injection weight - 3073 g Core - 4 pieces on fixed plate Core - 4 pieces on fixed plate Pneumatic cascades - 10 pieces Hot runner control 40 zones