Condition: new, New device MASS International Color mixer / Batch mixer Mixer for plastic granules available from stock at short notice Mixer MV 2: Steel version Capacity 200 liters / 120 kg granulate Length 700 mm Width 700 mm Crjlou Ti Tvergzy Rob Height 1050 mm (incl. control panel 1250 mm) mobile on steerable stop rollers Removal opening for suction lance on both sides, additional drain opening at the bottom, Safety switch on inlet cover and drain opening, Height adjustable in 25 mm steps, Inspection window to check fill level Control via control panel Interval and continuous mixing adjustable MV batch mixer for complete mixing of the entire plastic granulate. Ideal for mixing in additional components such as color batch, additives, fillers, etc.. Due to the forced guidance through the screw sleeve, the entire plastic granulate in the mixer is in the flow, plastic granulate in the mixer is in the flow and mixes completely with the additional completely mixed with the additional components within a short period of time. No "dead" corners are formed, as is the case with conventional screw mixers / agitators.

Condition: ready for operation (used), Year of construction: 2009, Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes. Cslrgswhfmlozy Rerb

Year of construction: 1994, Condition: excellent (used), Functionality: fully functional, Manufacturer: Rapid Model: 2645-KU 3 rotor blades Crslrswg R S Regzy Reb 2 stator blades Power: 12 kW Slow-speed mill with soundproof enclosures

Condition: refurbished (used), operating hours: 39,264 h, Functionality: fully functional, clamping force: 500 kN, ejector stroke: 80 mm, total length: 3,395 mm, total width: 1,000 mm, total height: 2,000 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Crelrev Nibdjgzy Reb Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2004, 570 C 2200 - 675 Thermoplastic cylinder cpl. 55 mm highly wear-resistant Technology level 2 servo-controlled with 2 control pumps Thermoplastic processing Open nozzle 55 mm Nozzle tip radius 35 Heating tape for open nozzle Heating tape for extended nozzle tip Nozzle tip Clamping plate set 570 central Ø 125 mm Connection for blow-out device 1 Selector unit incl. connection Core pull 1, simultaneous movement Holding pressure manually adjustable Power-operated safety slide Robot system interface (to EUROMAP 12), 32-pin ARBURG master computer interface Power socket vert. 1 CEE, 1 additional Schuko Cutting unit Temperature control unit WKZ 20 mA Interface printer serial V24 Parallel connection for heating tape nozzle tip Interface coloring device Low-current switch cabinet 400 x 800 Heavy current switch cabinet 800 x 800 4 free cooling circuits manually adjustable Machine-related cooling circuits controlled Extended monitoring equipment package Equipment package extended movements Production control equipment package Optimization / operating aids equipment package Quality assurance equipment package Documentation equipment package Without granulate container 50 L Injection control TFT color monitor Oscillating elements Selogica control (sequence editor) Connection ejector plate safety device Crolswgb E Ijrgzy Rsb Ejector quick-release coupling Water-cooled switch cabinet Power socket vert. 1 CEE, 1 Schuko Hydraulic ejector Larger holding pressure pump for simultaneous movements of the secondary axes, e.g. core pull functions during mold opening Cycle start when closing protective hood

Condition: like new (used), Functionality: fully functional, Nordson Hydraulic Screen Changer / Start-Up Valve For sale is a like-new Nordson / Kreyenborg hydraulic single-piston screen changer. The unit is ideal for extrusion lines and can be used as both a conventional screen changer and a start-up valve. Technical Specifications: • Screen area: 27 mm (see photos) • Design: hydraulic, with hydraulic cylinder Optional: Hydraulic station Crolrgzyswb Dc So Reb Condition: • The unit has been tested and is fully functional. • Ideal as a cost-effective solution for start-up or cleaning processes.

Condition: new, New device Enmair EML-6U Suction conveyor / vacuum cleaner Several devices immediately available from stock Enmair EML‐6U Celrjr A D I Ejgzy Rorb Funnel capacity 7.5 liters Conveyor volume 300 kg/h Motor 230V 50Hz Stainless steel container Automatic filter cleaning Metal filter insert Additional exhaust air filter for external installation Incl. wired remote control, approx. 2m cable length Incl. 3m spiral hose ¤ 40 mm with stainless steel probe

Condition: excellent (used), Year of construction: 2018, babyplast 10/12 (5.135 h) Manufacture year: 2018 Operating hours: 5,135 Stunden Screw: 16 mm Injection pressure: 1030 bar Stroke volume: 12 cm³ Clamping Force: 10 t Tie bar distance: 122 mm Mould installation height min.: 70 mm Plate distance max.: 180 mm Dimensions: 1200 x 900 x 1700 mm Eeight: 200 +150 = 350 kg Crelrgzyjwhxm Se Rob Connected load: 3 kW price: €17,900.00 contact: Ralf Schulz incl. table + sorter, Price when new 27.000 + 1.350 + 1.230 = 29.580,- Euro

Condition: excellent (used), Functionality: fully functional, Central conveyor system consisting of: Crolrjwg H R Nsgzy Rsb 1. Piovan type F44/2 vacuum pump 2. 10 Piovan material conveyors 3. 2 Piovan type LYBRA V coloring devices

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 050, I am offering a single-screw extruder from Herbert Stork. Screw diameter 30mm, process length 700mm. Max. screw speed 120rpm; Daynisco pressure sensor newly installed with test report; System has recently been serviced with gear oil change and maintenance report; Documentation is partially available; There are 5 different screws with different compression ratios, 2x with mixing part; Cslrgzjvx Ul Tsy Rsrb A round nozzle with 3mm is installed. I work in extrusion technology myself.

Condition: excellent (used), Year of construction: 2017, 1x used Arburg 1500T 1600-170 Ma-No. 241988 Year of manufacture: 08/2017 Complete thermoplastic cylinder, 30 mm, highly wear-resistant Standard screw coupling, two-edge coupling geometry Selogica direct control system Technology level 2, servo-driven with 2 control pumps Special model rotary table, ergonomic design Cslrgzyowgb Ezo Rorb Thermoplastic processing 2-station rotary table, 180° forward/backward alternating Open nozzle, 30 mm Nozzle tip radius 35 mm Heating band for open nozzle Central clamping platen set, Ø 125 mm Blow-out device 1 with pressure reducer at station 1 Connection for blow-out device 2 at station 2 Connection for tool position monitoring on the movable mold platen Connection for tool position monitoring on the rotary table Core pull 3, simultaneous travel movement P/Q controlled, programmable Core pull 4, simultaneous travel movement P/Q controlled, programmable Core pull 1+2, on the rotary table P/Q controlled, programmable Light curtain at 180° Continuous oil cooling and filtration Connection for oil bypass filtration Extension pipe for granulate container Injection compression molding and venting with clamping unit Interface to host computer OPC-UA 8 programmable inputs/outputs Socket combination 1CEE, 1 Schuko, protected by a 30mA Type B residual current device Socket combination 3CEE, 3 Schuko, protected by a 30mA Type B residual current device Interface WKZ 20 mA temperature control unit HB-THERM temperature control unit connection cable Printer serial USB interface CompactFlash interface for data storage Operator authorization with chip card according to EUROMAP 65 9 electrical heating control circuits for tool heating Inking device interface Lighting in the loading area 7 free cooling circuits, manually adjustable 2 cooling circuits on a moving plate for water, max. 60°C 2 cooling circuits on a turntable for water, max. 60°C 2 temperature control circuits on a moving plate for water, max. 140°C 4 temperature control circuits on a Water rotary table, max. 140°C Machine-specific cooling circuits controlled Extended monitoring package Extended travel motion package Production control package Optimization/operating aids package Quality assurance package Documentation package Axis monitoring package aXw Control ScrewPilot for 1st injection unit 8-way rotary union, top-mounted Corrosion protection treatment for rotary table Circumferential sealing lip on the outside

Condition: excellent (used), Year of construction: 2003, Piovan material dosing unit colouring station Type Model: MDT 14 -- 1MD 1840 Specification: PA 58D /54S M Crslrshupq Eogzy Rsb Year of construction: 2003 volumetric dosing capacity: 0,1 to 3,2 kg./h hopper volume: 15 ltr. 2 separate dyeing stations + 1 main hopper tested for functionality before dismantling available immediately in our warehouse Hannover /Germany

Condition: new, New appliance ENMAIR Color dispenser ECM-5012 several devices immediately available from stock volumetric dosing screw 12mm capacity 0,1 - 2 kg/h hopper 6 liters Celoi Igw Hergzy Rsrb 1 x 230V 50 Hz Optional: Double color mixer Funnel 12 liters

Condition: excellent (used), Year of construction: 2011, BATTENFELD TM 300/2250 UNILOG B6E ServoPower (S&P 3774) Manufacture year: 2011 Operating hours: 42,500 Stunden Screw: 65 mm Crolrowhxmxsgzy Rjb Injection pressure: 2070 bar Stroke volume: 1078 cm³ Clamping Force: 300 t Tie bar distance: 630 x 630 mm Mould installation height min.: 250 mm Plate distance max.: 1250 mm Dimensions: 7000 x 1800 x 2400 mm Eeight: 11800 kg Connected load: 37 kW Price: €32,900.00 contact: Mr. Ralf Schulz Robot Interface, 3 x corepuller, 2 x shot off nozzle, hotrunner 1-24, Airvalve

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Manufacturer: Piovan Model: LYBRA LG10 Plus a spare parts dispenser (without control unit) and 4 augers Crjlrswg H N Sogzy Reb

Condition: good (used), Year of construction: 2010, 1x used Krauss Maffei KM 300-2000-380-CX with robot, safety fence, conveyor belt, and turntable! Year of manufacture: 2010 Machinery No. 61014333 Horizontal screw: 70 mm Vertical screw: 30 mm Core pulls: 4x Hot runner control stations: 16 zones Crolewgb Enjrgzy Rjb The machine is available immediately!

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, Functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170722 Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Special Control unit cc 200 Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Crjljt U Agmjrgzy Rob Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW The machine is available from September in our warehouse in Hanover/Germany and has been tested. Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany

Condition: excellent (used), Year of construction: 2012, ARBURG A 520 H 1500-800 HIDRIVE (S&P 3763) Manufacture year: 2012 Operating hours: 37,500 Stunden Screw: 50 mm Injection pressure: 2000 bar Stroke volume: 392 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 5200 x 1700 x 2200 mm Eeight: 6660 kg Crelrgzyjwhxlne Rsb price: 49.500,00 € contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Printer interface Interface for inking unit Cslrgzyewgb Ebe Rjrb Connection for conveyor belt via 5-pin plug Connection for selection unit The machine is sold without any other visible peripherals / tools!

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 year of construction: 2004 Control : Selogica Extras: 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Interface master computer Interface dyeing unit Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm Cjlrgzehyumgoy Rorb height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Condition: excellent (used), Year of construction: 2015, ARBURG A 570 H 2000-1300 e² HIDRIVE (24.000 h) (S&P 3775) Manufacture year: 2015 Operating hours: 24,000 Stunden Screw: 55 HVF mm Injection pressure: 2380 bar Stroke volume: 570 cm³ Clamping Force: 200 t Tie bar distance: 570 x 570 mm Cslowhxlbjrgzy Rerb Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 6200 x 2000 x 2200 mm Eeight: 10250 kg Connected load: 30 kW Accu, Airvalve, Sorter Unit, Corepuller, Conveyor belt, Robot Interface EM67, Cylinder heating up to 450°C, shott off nozzle, extension max. mouldheight to 750mm, price when new approx. 190.000,- Euro price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2013, operating hours: 42,160 h, Functionality: fully functional, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Arburg 1500T 2000-400 rotary table vertical machine Machine no. 225999 You can find the complete equipment on the downloadable documents - machine card Control: Selogica « Year of manufacture, 2013 * Total machine cycles only 1,907,296 « Operating hours automatic 42160 Clamping unit Plate spacing: 700 mm Clamping force: 200 to/ 200 kN Tool installation height: 400 mm Table diameter: 1500 mm Angle of rotation: 180° Rotation time: 2.4 s min. Weight on rotary table: 1050 kg Ejector force: 45 kN/ 175 mm ejector travel Injection unit Screw diameter: 40 mm Displacement: 201 cc Injection weight: 184 gr. Injection pressure: 2000 bar Extras « 2-station rotary table 180° forward/backward alternating with servo-electric rotary drive and hydraulic fixing pin for fine centering of the rotary plate in the end position; separating protection between the closing and insertion area, height adjustable on the rotary plate to the tool bases, with the option of attaching media lines and connections for the tool bases - Rotary table diameter mm 1500 - Closing force max. kN 2000 Injection unit according to EUROMAP 400 Cjlrgzjuuf Iasy Rjrb Screw diameter 40mm Special model rotary table ergonomic design with the following features: © - Corrosion protection treatment for rotary table (VE 574/90) © - Water connections 2 circuits © -3 hydraulic connections for needle closure system © -3 x core pull © -Per station: one core pull and 2 x temperature control © -6 x tool temperature control © -12 zone tool heating circuits © -Kistler internal pressure sensors (2x) © -Temperature query for start-up parts Weight: 11,200 kg. Energy: 22KW motor - heating power: 9.4 KW 5 zones - connection value 100 A the machine is offered functionally tested fully functional with commissioning guarantee - tested before dismantling For information about the machines we offer and our company - we only sell our own machines purchased from ongoing production from our Hanover warehouse - all machines offered are checked and tested before dismantling - we do NOT sell insolvency goods - we are NOT an agent who deals with third-party property. - all machines offered come from successful companies for which maintenance and care is a matter of course - all machines offered can be viewed in our warehouse

Condition: excellent (used), Year of construction: 2016, DR.BOY 55 A DUROPLAST (7.278 h) (S&P 3725) Year: 2016 Operating hours: 7.278 h Screw: 32 Duroplast mm Injection pressure: 2127 bar Crolswhxk Dergzy Rsb Injection volume: 96 ccm Clamping force: 55 t Tiebare distance: 360 x 335 mm Mouldheight: 250 mm Daylight max.: 650 mm Size: 3200 x 1200 x 2000 mm Weight: 2430 kg Power: 11 kW Price: € 26.800,00 contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull Cjlrgsvimd Njzy Rorb - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Csljwhxkworgzy Rsrb Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW price: 59.500,00 € contact: Mr. Ralf Schulz Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro