Used press brakes with 100-119t bending force for sale (123)

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Cjdpszdgnbsfx Abrjhd Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3 AX, working width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, control voltage: 380 V, oil tank capacity: 70 l, overall weight: 5,000 kg, total length: 2,800 mm, total width: 1,800 mm, total height: 2,200 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, finger protection, type plate available, Press brake SCHIAVI - AMADA RG 50-25 Press force 50 tons Table length 2550 mm MASTER TASK 3-axis CNC control Chedpfx Aeygu Aljbrjd Complete with upper and lower dies Fully functional and connected for tests and video

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 43,000 h, For sale: TRUMPF L3030 laser cutting machine YEAR 2001 LIFTMASTER+ with loading and unloading shuttles Codpfx Aozq R D Sobrjhd 3000 WATT FORMAT 3000X1500 MAGNETIC TURBINE SIEMENS control

Year of construction: 2000, condition: good (used), High quality used Edwards Pearson pr6 7axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2000 5 axis back gauge – z1, z2, x, x1 and r axis – 7axis in total – multi axis Taper finger / tapered finger Crowning Cybelec CNC control Machine in good working condition Fully serviced Chjdpfxjpr U Tdj Abrod The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Csdpfx As Aazxijbrehd Adjustable crowning Year of manufacture: 2008

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: 745003, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA 65, bending force (max.): 110 t, table height: 800 mm, oil tank capacity: 200 l, overall weight: 13,000 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 3,000 mm, input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, F.lli Farina 3-axis, 4100-ton press, 110-ton capacity. Year of manufacture: 2003. Delem 65 control system. The machine is still in perfect working order and is for sale due to limited use. Codpfx Abe Afwybsrjhd

Year of construction: 2005, condition: like new (used), Quality used Bystronic Pr 100 8axis cnc pressbrake for sale Codpfx Aohufktjbrshd BYSTRONIC PR100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Modeva 10S Control. Manufactured 2005 – fully serviced with Bystronic uk from new Specification Year of Manufacture /new 2005 Control Cybelec Modeva 10S Back gauge Programmable Guards Fiessler AKAS Capacity 100 Ton Maximum length of bend 3100mm / 3metre Extended Daylight – to be confirmed Max stroke 315mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Hydraulic Crowning We can quote for delivery and installation complete with operator training We can advise and supply brand new tooling to produce your sheet metal products on this cnc press brake

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Chodpfx Abjz Hbu Rsrsd Type: AG BAHM 100 4 Capacity: 4000 x 100 tons Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is.

Condition: excellent (used), Year of construction: 2006, Pressing force: max. 850 kN Cedpfxsz Hl Nfo Abrjhd Stroke: max. 215 mm Operating pressure: max. 300 bar Response time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm Weight of the press: 7,300 kg Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V= Compressed air connection: 6 bar

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Cutting performance Cutting length: approx. 3,200 mm MACHINE DETAILS Manufacturer and model Manufacturer: Beyeler Csdpfx Abo Adu Tuorshd Type: CP-3100X13 Machine type: Plate shear Dimensions and weight Length: 4,000 mm Width: 2,400 mm Height: 2,300 mm Weight: 10,000 kg

Condition: used, Year of construction: 2021, Max. pressure 100 ton Max. bending length 3060 mm Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Chodsxr U Nhopfx Abred Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

Year of construction: 2001, condition: excellent (used), Quality used Edwards Pearson pr6 cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2001 Hydraulic upper clamping 4 axis back gauge – z1, z2, x and r axis – 6axis in total NEW amplifiers fitted Cybelec DNC1200 Machine in good working condition including some upper & lower Pressbrake tooling. Serviced by Bystronic uk We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine. Chsdpfx Abepcf R Hjred

Year of construction: 2000, condition: like new (used), Used Edward Pearson pr6 100ton x 4metre multi axis cnc pressbrake for sale Pr6 100/4100 Make: Edwards Pearson Model: PR 6 Pressure Reference Year / new: 2000 Total axis:6 – 4axis back gauge X R Z1 Z2 X1 – recently replaced / new amplifiers Free standing no pit required Cedpfjg D Uapjx Abrohd Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Cnc control: Cybelec DNC 1200 PS/B Fully serviced with Bystronic uk – as attached per photo Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with tuition with your operators can be arranged.

Year of construction: 2004, condition: like new (used), Used high quality Bystronic Edwards Pearson PR6 cnc pressbrake for sale – manufactured by Beyeler GMBH Bystronic Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2004 Chedpfx Abjhgl S Sorod Hydraulic tool clamping Hemming table – to be confirmed 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec Modeva 10 Machine in good working condition including upper & lower Pressbrake tooling. Fully serviced by Bystronic uk The full services of New tooling, delivery, installation, training and guarantee are available form us on this machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 17,446 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 110 t, working width: 3,100 mm, number of axes: 8, oil tank capacity: 130 l, overall weight: 8,900 kg, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Cedpfx Aox N Ibhsbrohd Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning Csdozwla Uepfx Abrjhd BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Cedoi Igi Sepfx Abrohd Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: like new (used), Year of construction: 2022, pressing force: 100 t, A well-maintained and regularly serviced TRUMPF press brake is available. Number of strokes: approximately 860,000. The machine is in continuous operation, so it can be inspected and tested at our facility. The stated price is the net amount. Cjdpfx Absv E Nvaorehd

Condition: used, functionality: unexamined, operating hours: 18,758 h, control type: manual, degree of automation: manual, actuation type: hydraulic, bending force (max.): 120 t, stroke length: 165 mm, throat depth: 300 mm, oil tank capacity: 430 l, back gauge adjustment: manual, overall weight: 9,700 kg, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: emergency stop, lower tooling, upper tooling, For sale is a hydraulic press brake from the renowned Swiss manufacturer Hämmerle AG (Zofingen). The machine was purchased used several years ago but has never been put into operation at our facility. It was neither connected nor used productively; instead, it has been stored protected in our workshop for an extended period. Recently, the machine has been kept covered outdoors. The sale is as-is, and the functionality has not been tested. This press brake is ideal for workshops or metalworking businesses looking for a very robust, durable industrial machine without CNC control. Technical specifications (excerpt): • Max. pressing force: 120 tons • Max. stroke: 165 mm • Throat depth: 300 mm • Motor power: 15 HP • Operating voltage: 380 V / 50 Hz Chedpjyguxysfx Abrod • Hydraulic oil: Shell Tellus 68 • Oil tank capacity: 430 liters • Weight: approx. 9,700 kg • Operating hours according to counter: approx. 18,758 h Viewing possible by appointment, currently not connected to power. Loading and transport are the buyer’s responsibility. Sale is without warranty or guarantee, returns excluded.

Year of construction: 2001, condition: good (used), Quality used Edwards Pearson pr6 cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2001 Hydraulic R upper clamping T5 Table 4 axis back gauge – z1, z2, x and r axis – 6axis in total Chodsh An Uaepfx Abrod Cybelec DNC1200 Machine in good working condition including a full length set of upper & lower Pressbrake tooling. Serviced by Bystronic uk Edwards Beyeler tooling P5R – R1 – 1030 full length top and bottom The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: like new (used), Year of construction: 2017, oil tank capacity: 150 l, Equipment: documentation/manual, Durma AD-S 30100 CNC Hydraulic Press Brake (2017) – 100t x 3050mm Description: For sale is a high-quality, well-maintained, and fully operational Durma AD-S 30100 CNC hydraulic press brake from the year 2017, directly from production. The machine is regularly serviced, extremely precise, and ready for immediate use. Cedpfx Abszd U Tdershd Factory Technical Specifications: Year of Manufacture: 2017 Bending Force: 100 tons Bending Length: 3050 mm Machine Dimensions (L × W × H): 4500 mm × 1900 mm × 2900 mm Machine Total Weight: 8500 kg Hydraulic Oil Capacity: 150 liters Operating Hours: [10051] hours Equipment and Features: CNC Control: Modern, large-sized graphic touchscreen controller (Delem / Durma) on a swiveling console, with 2D/3D bending simulation. Axis Configuration: CNC-controlled Y1, Y2, X, and R axes. Crowning: CNC-controlled automatic table crowning system for uniform bending angles across the entire length. Safety: Factory-installed, premium laser hand and finger protection in the work area. Accessories: The upper bending die (punch) and lower die/matrix system shown in the pictures are included with the machine and are part of the price. The machine can be inspected and tested in operation at our facility by prior arrangement. The buyer is responsible for arranging transport and dismantling. Asking Price: 45,000 EUR + VAT Location: [City / Hungary]

Condition: used, functionality: fully functional, Year of construction: 2015, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Chsdpfx Abezrwc Djrsd Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2006, pressing force: 102 t, This 4-axis Durma ADS 25100 was manufactured in 2006. It features a press force of 100 tons and a length of 2500 mm, making it suitable for various bending applications. If you are looking to get high-quality bending capabilities, consider the Durma ADS 25100 press brake we have for sale. Contact us for further details. Technical Specification Bending Length 2500 mm Chjdpj Adrvajfx Abrjd

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 7771, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller model: EC20 - graficzne 2D, bending force (max.): 100 t, working width: 3,000 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 3,000 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, number of axes: 4, table height: 900 mm, travel distance X-axis: 1,000 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 8,900 kg, total width: 3,100 mm, pressing force: 100 t, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system Cjdeylt Ukopfx Abrshd - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: used, functionality: fully functional, Year of construction: 1991, machine/vehicle number: 91033420, working width: 3,050 mm, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2020, We offer this used HACO TS 3006 guillotine shear and press brake, manufactured in 1991. Manufacturer: HACO Type: TS 3006 Year of manufacture: 1991 Voltage: 380 V Capacity: 3050 x 6 Chodpfx Aozdzh Ujbred Serial number: 91033420 Electric length stop Sale exclusively to businesses, with exclusion of any warranty, guarantee, return or conversion, to the extent permitted by law. The machine is sold in its current condition ("as is"). Information regarding technical data, condition, operating hours, accessories and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations and legal requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer's warranties or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us.